Barco Projector Cineversum 110 Quickstart Manual

8. Image Menu
How to change the Noise reduction ?
1. PressMENUto activate the menu bar. (image 8-11)
2. Press→to select theImageitem.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectsettings.
5. Press→to pull down the menu.
6. Use↓or↑to selectNoise reduction.
7. PressENTER.
A slider box appears
8. Use←or→to change the noise level.
The higher the value, the higher the noise reduction.
Or,
click in the input box and enter the desired value with the numeric keys.
Image 8-11
8.3 Aspect ratio
Aspect...

8. Image Menu
Aspect ratioDescription
LetterboxTo display normal television formats which contain 16 to 9 signal information
Custom...To set up custom formats
Selecting Auto in case of a Video source may shrink the image horizontally or vertically
Some examples:
The first column shows the aspect ratios for a standard television signal with 4:3 image information. The only correct aspect ratio is
4:3. In all other cases the image is transformed.
The second column shows the aspect ratios for a standard...

8. Image Menu
How to change the Aspect ratio ?
1. PressMENUto activate the menu bar. (image 8-13)
2. Press→to selectImage.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectAspect ratio.
5. Press↓to select the desired aspect ratio.
6. PressENTERto confirm.
Image 8-13
How to set up a custom Aspect ratio ?
1. PressMENUto activate the menu bar. (image 8-14)
2. Press→to selectImage.
3. Press↓to pull down theImagemenu.
4. Use↑or↓to selectAspect ratio.
5. Press↓to selectcustom....
6. PressENTERto...

8. Image Menu
Aspect ratio
Horizontal
Use 
← and → to select9 Vertical
16
Use 
↑ and ↓ to adjust
Image 8-15
8.4 Show native resolution
Show native resolutionoverrules theFull Screen Representationfunction inDisplay Setup.
Show native resolutionis greyed out for video signals.
DMD
Digital Micromirror Device
What can be done
The aim here is to always show the resolution of the source independently of the resolution of the DMD panels.
Image 8-16
When theshow native resolutionfunction is in the ON position,...

8. Image Menu
SourceProjected image
SXGA+4:31400x10504:31400x1050part of the image displayed,
image scroll possible
UXGA4:31600x12004:31600x1200part of the image displayed,
image scroll possible
720p16:91280x72016:91280x720normal image projected
When the Full Screen Representation function is in the ON position, it forces to use the complete native res-
olution of the DMD panels, except when the Show native resolution function is switched ON.
How to enable the “Show native resolution” function?
1....

8. Image Menu
• Projector white
• computer : 9300 K
• Video : 6500 K
• Film : 5400 K
• Broadcast : 3200 K
These calibrated presets can be selected and will provide optimum color tracking, the projector allows however the setting of a
personal color temperature, this is done incustom
Projector white will provide maximum projector light output.
How to select a preset color temperature ?
1. PressMENUto activate the menu bar.
2. Press→to select theImageitem. (image 8-18)
3. Press↓to pull down theImagemenu....

8. Image Menu
Image 8-19
x
200
0
1000
Image 8-20
Change between x and y with Image 8-21
Koordinatewahl x und y mit 
Image 8-22
Cambie entre x y y con Image 8-23
the x and y coordinate changes between 0.00 and 1.00. For practical reasons, the values on the slider box are
multiplied by 1000.
8.6 Color space
Color space
A color space is a mathematical representation for a color. For example, the RGB color space is based on a Cartesian
coordinate system.
What can be adjusted ?
The color space (gamut), the...

8. Image Menu
6. Use↓or↑to select the desired color space.
EBU
European Broadcasting Union. This organization defines a European standard.
ANSIAmerican standard.
Projector Maximum color space
Custom The user can define the x and y coordinates for red, green and blue which forms the corners of the color space.
By changing the coordinates, the color reproduction can be changed.
7. PressENTER.
A white bullet shows the active setting.
Image 8-24
How to change the custom color space ?
1. PressMENUto activate...

8. Image Menu
Red x
200
0
1000
Image 8-26
the x and y coordinate changes between 0.00 and 1.00. For practical reasons, the values on the slider box are
multiplied by 1000.
8.7 Filmmode detection
What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
The filmmode detection insures that these converted signals are shown without artefacts.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF)...

8. Image Menu
Image 8-27
8.8 Input Balance
Overview
• Introduction to Input Balance
• Adjusting the input balance
• Input balance for YPrPb signals
8.8.1 Introduction to Input Balance
Introduction: Unbalanced color signals
When transporting signals, there is always a risk of deterioration of the information contained in the signals.
In case of information contained in the amplitude of the signals which is the case of data color signals (R, G, B),image 8-28 , we are
quite sure that the amplitude of these...