Barco Projector Cineversum 110 Quickstart Manual

9. Tools Menu
PiP dedicated buttons
•PiP Adjust :this button allows to focus on one particular window, this window is shown with a white frame surrounding the
selected window.
A source identification box is displayed in the right lower corner.
Image 9-2PressPiP Adjustbutton to move the frame to the next window. This can also be done viaPiP Adjustin the Tools menu.
•PiP:this button allows to browse through the different configurations, it has the same function asPiP selectin the Tools menu.
Since there is...

9. Tools Menu
Image 9-3
9.4 PiP add window
What can be done ?
It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.
Sources which are already used are not selectable. If for instance the PiP layout contains a component video then component video
will be not selectable.
Once added, the window may be changed in several ways to meet particular needs:
• repositioning
• re-sizing
• changing the order
Image 9-4
Add PiP Window
A Select source for window
B...

9. Tools Menu
8. Position the window on the screen with the 4 arrow keys. (image 9-9)
9. Change the viewing order of the displayed images (z-order) with the↑and↓. (image 9-10)
Image 9-5
Source selection
Data on BNCs
Video selector
SDI
DVI
PC
Image 9-6
Pip Wizard step 1 : Select the source you want to display in the window...Image 9-7
Pip Wizard step 2 : Resize this new window with ↑↓ ←→Image 9-8
Pip Wizard step 3 : Position this new window with ↑↓ ←→Image 9-9
Pip Wizard step 4 : Change the order of this...

9. Tools Menu
Image 9-11
Select window with  → Press  to remove
Image 9-12
9.6 PiP layout
Overview
•PiPSave
• PiP rename layout
• PiP delete layout
9.6.1 PiP Save
What can be done ?
The active layout can be saved or saved as.
When a new layout issaved it is added to thePiP selectmenu.
A fixed layout can be edited (re-sizing, re-positioning,...) but it can not be saved under its original name.
How to save a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem. (image 9-13)
3....

9. Tools Menu
Image 9-13
Save PiP layout
Layout name:
Full-screen
Image 9-14
Message
Current layout has been saved
Press  or  to return
Image 9-15
9.6.2 PiP rename layout
What can be done ?
Thenonfixedlayouts (factory and personal layouts) can be renamed .
The maximal length of the name is 12 characters.
A fixed layout can not be renamed
How to rename a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem. (image 9-16)
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP...

9. Tools Menu
Rename PiP layout
PIP Layout 1
PIP Layout 2
PiP Layout 3
Own layout 1
Own layout 2
Image 9-17
Rename PiP layout
New name:
Own layout 1
Image 9-18
9.6.3 PiP delete layout
What can be done ?
The non fixed layouts (factory and personal layouts) can be deleted.
The fixed layouts and the active layout can not be deleted
How to delete a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem.
3. Press↓to pull down theToolsmenu .
4. Use↑or↓to selectPiP layout.
5. Press→to...

9. Tools Menu
This can also be done by using the dedicated PiP Adjust key on the RCU
Image 9-20
PiP adjust in case of 2-by-2 layout
A Data1 window has the focus, new settings will only affect Data1 window
B Video1 window has the focus, new settings will only affect Video1 window
PiP adjust
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem. (image 9-21)
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP Adjust.
5. PressENTER.
The menu disappears.
6. PressENTERto move the focus...

9. Tools Menu
94R5976697 CINEVERSUM™ 110 12/05/2004 

10. Signal menu
10. SIGNAL MENU
Overview
• Overview of the Signal menu
• Switching mode
• Background
10.1 Overview of the Signal menu
Overview
• Switching mode
-Seamless
-Boxin
- Box out
- Shift in left
- Shift in right
- Shift in top
- Shift in bottom
- Vertical curtain open
- Vertical curtain close
- Horizontal curtain open
- Horizontal curtain close
- Fade in out
- Random
• Background
- Logo
-Blue
-Black
10.2 Switching mode
Switching from one source to another
To minimize undesired effects when...

10. Signal menu
Image 10-1
TheRandommode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in theRandommode.
Note on Fade in/out
In some cases, depending on the sources to be switched, the fade in/out effect is impossible or may not occur.
96
R5976697 CINEVERSUM™ 110 12/05/2004