Barco Projector Cineversum 110 Quickstart Manual

5. Getting used with the Menu structure
In some cases an alphanumeric value (file name, ...) has to be entered. Use↑or↓to scroll through the char-
acter values once the input field is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz
R5976697 CINEVERSUM™ 110 12/05/200447 

5. Getting used with the Menu structure
48R5976697 CINEVERSUM™ 110 12/05/2004 

6. Source Selection
6. SOURCE SELECTION
Overview
• Source Selection overview
• The use of icons
• Source selection
• Selecting a data source on the 5-cable input
• Composite Video
• S-Video selection
• The Video Selector
6.1 Source Selection overview
Source selection overview
•DataonBNC’s
• Component Video
• RG(s)B Video
•PC
• Composite Video
- Video
- Video VS
- Video R
- Video G
- Video B
- Video Y
- Video C
•S-Video
- S-Video 1
- S-Video 2
- S-Video 3
•DVI
•SDI
• Logo
• Video selector...
6.2 The use...

6. Source Selection
How to select a source ?
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to select one of the different sources (Press→to pull down if the item has a submenu).
4. PressENTERto confirm your choice.
On the screen appears now the selected source with at the same time for a few seconds a text box with source information.
(image 6-1)
Video source 1
Video
Video625.c06
Image 6-1
Source indication
6.4 Selecting a data source on the 5-cable...

6. Source Selection
When selecting “1” with the remote control, the predefined source type will be displayed.
6.5 Composite Video
Possible connections
In normal mode, one video source can be connected to the video input.
In extended mode, up to 7 different video sources can be connected to the normal video input, or to the extended 5-cable input or
to the S-Video.
When the extended mode is not switched on, the on screen menu will have another layout with less selection
possibilities.
How to select one of...

6. Source Selection
6.6 S-Video selection
When the extended mode is not switched on, the on screen menu will have another layout with less selection
possibilities.
How to select one of the 3 S-Video inputs ?
1. PressMENUto activate the menu bar.
2. Press↓to pull down the Source Selection menu.
3. Use↑or↓to selectS-Video.
4. Press→to pull down the submenu.
5. Use↑or↓to select one of the different S-Video inputs. (image 6-4)
6. PressENTERto confirm your choice.
A white bullet indicates the selected S-Video...

6. Source Selection
4. Use the arrow keys to select the Extended check box.
5. PressENTERto disable or enable the extended mode.
CheckExtendedto switch to extended mode.
UncheckExtendedto switch to standard mode.
Image 6-5
How to select an input on the Video Selector
1. Use←or→to browse through the different inputs.
2. PressENTERto select.
UseMENUorBACKto exit the Video Selector.
Graphical interface
B
C
D
E
AA
B
C
D
E
Image 6-6
A BNC or S-Video connector on the video selector can be in one of following...

6. Source Selection
54R5976697 CINEVERSUM™ 110 12/05/2004 

7. General Menu
7. GENERAL MENU
Overview
• General Menu overview
• Pause
• Freeze
• Standby Timer
• Identification
7.1 General Menu overview
General Menu structure
• Pause
• Freeze
• Standby timer...
• Identification
7.2 Pause
Interrupting the image projection
With the Pause function, the image projection can be stopped (black image), the projector remains with full power for immediate
restart.
How to interrupt the image projection ?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3....

7. General Menu
Howtofreezetheimage?
1. PressMENUto activate the menu bar.
2. Press→to selectGeneral.
3. Press↓to pull down the General menu.
4. Use↑or↓to selectFreeze. (image 7-2)
5. PressENTERto activate the Freeze function.
Image 7-2
The image can also be frozen using the FREEZE key on the RCU.
7.4 Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a determined
time.
Message
No signal...