ATT System 25 Advanced Administration User Guide

TABLE 16-20 High Density Circuit Administration (Menu=3)
ACTION
DESCRIPTIONDATA
1
Board type[746=TN746/767=TN767]
2Error reporting enable[1=enable/0=disable]
3Line compensation
[Select 1-5]
4Zero code compression[0=ZCS/1=B8ZS]
5Framing mode
[0=D4/1=ESF]
6Signaling mode[0=Robbed bit/1=Common Channel]
8Red alarm activation time
[0=3 sec./1=10 sec.]
TABLE 16-21 System Administration (Menu=4)
ACTIONDESCRIPTIONDATA
3
Assign the number of rings before[Number of rings; 5]
unanswered calls extended by Attendant...

TABLE 16-21 System Administration (Menu=4) (continued)
ACTIONDESCRIPTIONDATA
34Toll restrict calls made over inter-PBX[1-9; 0 for none]
trunks (805) starting with one digit
35Specify the number of digits in the IXC[0 = 5 digits,
code1 = 5 or 7 digits,
2 = 7 digits]
36Identify the INPA status for toll restriction[ 0= non-INPA,
checking1 = INPA]
37Specify type of dialing plan for Home Area[0= 7-digit dialing,
Code calls
1 = 10-digit dialing]
38Specify the number of digits used for[0 = 13 digits,...

TABLE 16-21 System Administration (Menu=4) (continued)
ACTIONDESCRIPTIONDATA
78Change/remove display for unassigned[“11 characters or less”
DID numbers (up to 11 printable ASCIIor “ “ to remove;
characters)‘NO DID IN’]
80Maintenance-busy for TIE trunks[0=enable/1=disable]
81Switched Loop Attendant system: Audible[1=Y/0=N]
tone at expiration of hold timer?
83Switched Loop Attendant system: Length[10-255; 20]
of hold timer (seconds)
84Switched Loop Attendant system: DID[PDC]
access code to receive “0”...

TABLE 16-21 System Administration (Menu=4) (continued)
ACTIONDESCRIPTIONDATA
100
For Callback Queuing: Enter the[0 64; 64]
maximum queue size for outgoing
facilities:
101
For Callback Queuing: Enter the maximum[0 64; 64]
queue size for internal facilities:
102
For Callback Queuing: Enter the minimum[0-120; 30]
time (in seconds) between callback retries
for internal facilities
103
For Callback Queuing: Enter the minimum[0-120; 30]
time (in seconds) between callback retries
for outgoing facilities
110
For...

TABLE 16-22 Standard Call Type Defaults
FOR SWITCHED LOOP SYSTEMS ONLY
DEFAULTDEFAULT
CALL TYPE
CODEPRIORITYATTENDANT
(Action 91)(Action 92)(Action 93)
Dial Attendant (0)140
Call Following - Logged into SLAC24
NA
Non logged in FPDC
34
0
Unassigned DID44
0
Attendant DID access code
54
0
PDC of Attendant
64NA
Coverage701-7324
0
Returning
84
0
TABLE 16-23 Message-Center-Like Call-Type Defaults (effect of Action 90)
FOR SWITCHED LOOP SYSTEMS ONLY
DEFAULT
ASSIGNED
CALL TYPECODEPRIORITYATTENDANT
(Action...

TABLE 16-24 FPDC Administration (Menu=5)
ACTIONDESCRIPTIONDATA
1
List active FPDCs
2
Add an FPDC[FPDC to be added]
3Delete an FPDC[FPDC to be deleted]
4
Enter existing FPDC to be named[FPDC]
5Assign/remove Display ID from[“11 characters or
FPDC selected with Action 4less”, or “ ” to
remove]
TABLE 16-25 Direct Group Calling Administration (Menu=6)
ACTIONDESCRIPTIONDATA
1
2
3
11
12
13
14
20
21
51
52
53Assign a DGC access code (0 to delete an
existing DGC access code)
For data DGC groups only: Disable DGC...

TABLE 16-27 Searches: Action Items (Menu=8)
ACTIONDESCRIPTIONDATA
1Search for PDCs of Coverage senders[1]
2
Coverage receiver group[1-32 or 101-132 if DGC
coverage group]
1
Search for stations covering a specified group
[2]
2Coverage group[1-32]
1
Search for PDC of Coverage (individual) receivers
[3]
2
PDC of covered station
[PDC]
1
Search for PDC having an auto-intercom, message
[4]
waiting, manual signaling, or data button
2PDC of pointed-to station
[PDC]
1
Search for PDCs that hunt to a specified...

TABLE 16-27 Searches: Action Items (Menu=8) (continued)
ACTIONDESCRIPTIONDATA
1Search for port location of external alert[19]
2PDC of station with external alert[PDC]
1Search for button location on a station[20]
2PDC of station with buttons[PDC]
3Button function code (see “Action 101” column of[1-42]
Table 16-3)
1Search for area code assigned to specified ARS[21]
pattern
2Pattern number or wildcard character
1Search for the DDC that can dial for a station or[22]
data port.
2Enter PDC/DDC being “dialed...

TABLE 16-28 Board Type—Wildcard Representation
CATEGORY:
BOARD DESCRIPTION:DATA:
Empty
Empty Slot (Searches 15& 17 only)0
Station
Single-line Voice Terminal
or Special Port2..
MERLIN CS Voice Terminal (ATL) or Attendant
3..
MET Voice Terminal4..
Trunk
Ground Start or Paging7..
Loop Start or Paging8..
DID9..
TIE10..
Special
Touch Tone Receiver11..
Paging13..
Selector Consoles16..
Pooled Modem19..
Tone Detector
Dial Dictation21..
22..
Data
Data Ports18..
16-36 Command ReferenceNovember 1995 

TABLE 16-29 Port/Board Type—Specific Representation
CATEGORY:
DESCRIPTION:
DATA:
Voice Station
SINGLE-LINE VOICE TERMINALS:
Without message waiting indicator
201
With message waiting indicator202
MERLIN CS (ATL) VOICE TERMINALS:
5-Button, Z7302H01
302
5-Button Cordless ATL, Z7312H01-003303
10-Button, Z7303H01304
10-Button Hands-Free Answer on Intercom, Z7309H01303
10-Button Built-in-Speakerphone, Z7313H01A303
22-Button Built-in-Speakerphone, Z7314H01A312
34-Button, Z7305H01
307*
34-Button Deluxe,...