ATT System 25 Advanced Administration User Guide

PDCs of Group Coverage1     At Action =, enter 1.
Sender Stations
2     At 
Data =, enter 1.
3     At 
Action =, enter 2.
4     At 
Data =, enter the coverage group number, from 1-32,
or 101-132 for a DGC coverage group number.
5     Enter C to initiate the search.
PDCs of Stations in a1     At 
Action =, enter 1.
Specified Coverage
Receiver Group2     At 
Data =, enter 2.
3     At 
Action =, enter 2.
4     At 
Data =, enter the coverage group number, from 1-32.
NOTE: If you want to list the stations in...

PDCs of Stations That
Hunt to a Specified
Station1     At Action =, enter 1.
2     At 
Data =, enter 5.
3     At 
Action =, enter 2.
4     At 
Data =, enter the hunted-to station’s PDC.
DGC Group Number forThis search produces the DGC group number to which the
a Specified Stationspecified station belongs.
1     At 
Action =, enter 1
2     At 
Data =, enter 6.
3     At 
Action =, enter 2.
4     At 
Data =, enter the PDC of the station belonging to the
searched-for DGC group.
PDCs of Stations in a1     At...

PDCs of Pickup Group1     At Action =, enter 1.
Member Stations
2     At 
Data =, enter 9.
3     At 
Action =, enter 2.
4     At 
Data =, enter the pickup group number, from 1-16.
Assigned PDCs1     At 
Action =, enter 1.
2     At 
Data =, enter 11.
PDCs of Stations
1     At 
Action =, enter 1.
Associated with a Specific
Directed Night Service2     At 
Data =, enter 12.
Trunk
3     At 
Action =, enter 2.
4     At 
Data =, enter a 4-digit trunk number.
Directed Night Service
1     At 
Action =, enter 1....

3     At Action =, enter 2.
4     At 
Data =, 
NOTE: This search expects input in the form NNN or in
the form where N is the initial digit or two digits
identifying the station, trunk, special port, data, or empty

representation.
Output will be in the form where C is the cabinet
number, SS is the number of the slot in that cabinet, and

that slot. For example, if you want to search for single-
line telephone boards using the wildcard representation,

board in cabinet 1, slot 4, the first item returned...

Translated Board
Locations1     At Action =, enter 1.
2     At 
Data =, enter 17.
3     At 
Action =, enter 2.
4     At 
Data =, enter information from Tables 16-26 and 16-27
in Chapter 16.
To search for empty slots (board locations):
1     At 
Action =, enter 2.
2     At 
Data =, enter 0.
Translated Port Locations
NOTE: This search (in its default “Action=3 Data=0” mode
[translated ports]) finds a translated port location number in
the form CSSPP. In this case (as in the case of searching for
translated...

Port Location of ExternalThis search requires a PDC for input; it returns the port Alert
Alertlocation (CSSPP) of the external alert associated with the
station.
1     At Action =, enter 1.
2     At 
Data =, enter 19.
3     At 
Action =, enter 2.
4     At 
Data =, enter the PDC of the station with external alert.
Button Location onThis search yields a button number(s) that has assigned to it the
Stationsfunction for which you are searching on a given station.
1     At 
Action =, enter 1.
2     At 
Data...

DDCs that can dial for a
Station or Data Port via
Third-Party Call Setup1     At Action =, enter 1.
2     At 
Data =, enter 22.
3     At 
Action = 2, enter the PDC or DDC being “dialed for” (the
associated station).
Bridged Appearances1     At 
Action =, enter 1.
2     At 
Data =, enter 23.
3     At 
Action =, enter 2.
4     At 
Data =, enter the PDC of the principal.
5     At 
Action =, enter 3.
6     At 
Data =, enter the principal station’s system access button
number.
Agent Status for CMSThis search...

To search for DS1 boards
1     At Action =, enter 1.
that are physically
2     At 
Data =, enter 25.
present:
3     At 
Action =, enter 2.
4     At 
Data =, enter one of the following:
—1 to search a TN722
—2 to search a TN767
—3 to search both
NOTE: Enter C for each search request. (Result appears
as CSS when found.)
To search for DS1 boards
that are translated:
Permanent System
Alarms
1     At Action =, enter 1.
2     At 
Data =, enter 26.
3     At 
Action =, enter 2.
4     At 
Data =, enter one of the...

Most Recent Errors1     At Action =, enter 1.
2     At 
Data =, enter 32.
3     Enter C to list.
Display Support Searches
The Display Support feature lets you search for IDs (or names) associated with PDCs, DDCs,
FPDCs, DGC groups, and trunk numbers. System 25 stores a maximum of 550 IDs in two
alphabetical lists. One list is for trunk IDs, the other is for non-trunk IDs (PDCs, DDCs,
FPDCs, and DGCs). Two types of searches are available for both lists:
n     Given number, get ID
n     Given ID, get...

Search for:
Display ID for a Given
Number (Non-Trunk)1     At Action =, enter 1.
2     At 
Data =, enter 40.
3     At 
Action = 2, enter the PDC, DDC, FPDC, or DGC
access code.
Display ID for a Trunk1     At 
Action =, enter 1.
Listed Directory Number
(LDN) (Trunks Only)2     At 
Data =, enter 41.
3     At 
Action = 2, enter the trunk LDN.
Number for a Given1     At 
Action =, enter 1.
Display ID (Non-Trunk)
2     At 
Data =, enter 42.
3     At 
Action = 2, enter the Display ID for the PDC, DDC,
FPDC, or...