ATT DEFINITY Communications System Generic 3 Pocket Reference Instructions Manual

							FEATURES
Feature
Off-Premises Station
PC Interface
PC/PBX Connection
Personal Central
Office Line (PCOL)
Personalized Ringing
Power Failure
Transfer
Priority Calling
Privacy — Attendant
Lockout
Privacy — Manual
Exclusion
Property Management
System Interface
Pull Transfer
Queue Status Indications
Recall Signaling
Recent Change History
Recorded Announcement
Recorded Telephone
Dictation Access
Redirection On No
Answer (RONA)
Remote Access
Report Scheduler and
System Printer
Restriction —
Controlled
Restriction — Fully
Restricted Service
Restriction —
Miscellaneous TerminalG3vs
ABP
S
S
S
S
S
S
S
S
S
S
V2
S
S
S
S
S
V2
S
S
S
V2
S
G3vs
PBP
S
S
S
S
S
S
S
S
S
S
V2
S
S
S
S
S
V2
S
S
S
V2
S
G3s
ABP
S
S
S
S
S
S
S
S
S
S
V2
S
S
S
S
S
V2
S
S
S
V2
S
G3s
PBP
S
S
S
S
S
S
S
S
S
S
V2
S
S
S
S
S
V2
S
S
S
V2
S
G3i
S
S
S
S
S
S
S
S
S
S
GD
S
S
S
S
S
V2
S
S
S
GD
S
G3r
S
S
S
S
S
S
S
S
S
S
V2
S
S
S
S
S
V2
S
S
S
S
S
16 
						

							FEATURES
Feature
Restriction —
Miscellaneous Trunk
Restriction — Toll
Restriction — Voice
Terminal—Inward
Restriction — Voice
Terminal —
Manual Terminating
Line
Restriction — Voice
Terminal—Origination
Restriction — Voice
Terminal—Outward
Restriction — Voice
Terminal—Public
Restriction — Voice
Terminal—Termination
Ringback Queuing
Ringer Cutoff
Rotary Dialing
R2-MFC
Security Violation
Notification (SVN)
Send All Calls
Senderized Operation
Service Observing
Single-Digit Dialing and
Mixed Station Number-
ing
Straightforward Outward
Completion
Subnet Trunking
System Measurements
G3vs
ABP
S
S
S
S
S
S
V2
S
S
S
S
V2
S
S
S
S
S
S
S
O
17
G3vs
PBP
S
S
S
S
S
S
V2
S
S
S
S
V2
S
S
S
S
S
S
S
SG3s
ABP
S
S
S
S
S
S
V2
S
S
S
S
V2
S
S
S
S
S
S
S
O
17
G3s
PBP
S
S
S
S
S
S
V2
S
S
S
S
V2
S
S
S
S
S
S
S
SG3i
S
S
S
S
S
S
GD
S
S
S
S
GD
S
S
S
S
S
S
S
S
G3r
S
S
S
S
S
S
V2
S
S
S
S
V2
S
S
S
S
S
S
S
S
17.Available when the System Measurements Option package or
the Basic Call Center Option package is purchased.
17 
						

							FEATURES
G3vs
G3vsG3s
G3s
Feature
ABPPBP
ABPPBPG3iG3r
System Status Report
SSSSSS
Temporary Bridged
S
SSSSS
Appearance
Terminal Translation
V2V2V2V2V2
S
Initialization
Terminating ExtensionSS
SSSS
Group
Through Dialing
S
SSSSS
Time of Day Routing
O18O18O18O18O18O18
Timed Reminder and
S19S19S19S19S19S19
Attendant Timers
Touch-Tone Dialing
S
SSSSS
Transfer
SSSSSS
Transfer OutgoingV220V2V220V2V2S
Trunk
to Outgoing Trunk
Traveling Class
N/AO
N/AO00
Marks (TCMs)
Trunk Flash
S
SSSSS
Trunk Group
SS
SSSS
Busy/Warning
Indicators to Attendant
Trunk Identification
S
SSSSS
By Attendant
Trunk-to-Trunk TransferSS
SSSS
Uniform Dial Plan (UDP)N/AO
N/AOO
O
18.
19.
20.
Available when ARS or PNA is purchased.
Timed Reminder and Attendant Timers held call timer transfer to
“aatd.” Standard in G3vs/G3sABP, G3vs/G3sPBP, G3i, and G3r.
Transfer Outgoing Trunk to Outgoing Trunk is not available with
G3vs/G3s ABP.
18 
						

							FEATURES
Feature
Unrestricted Uniform
Dial Plan (UDP)
Visually Impaired Atten-
dant
Services (VIAS)
Voice Message Retrieval
Voice Response
Integration
Voice Terminal Alerting
Options
Voice Terminal Display
Wideband Switching
World Class Tone
Detection
World Class Tone
Generation
G3vs
ABP
NA
V2
S
V2†
V2
S
V2†
V2
V2G3vs
PBP
V2
V2
S
V2†
V2
S
V2†
V2
V2G3s
ABP
NA
V2
S
V2†
V2
S
V2†
V2
V2
G3s
PBP
V2
V2
S
V2†
V2
S
V2†
V2
V2
G3i
V2
GD
S
V2†
V2
S
V2†
GD
GD
G3r
O
V2
S
V2†
V2
S
V2†
V2
V2
19 
						

							FEATURES
The following table describes which features require additional hardware.
Feature
Abandoned Call Search
Abbreviated Dialing
ACCUNET® Service
Administered Connections
Answer Detection
Attendant Direct Exten-
sion Selection With Busy
Lamp Field
Hardware
TN747B CO trunk circuit pack.
Requires additional 748B tone detectors if the
special “wait” character is used frequently.
Modular processor data module (MPDM) AP
Demand Print+An AP, an MPDM, and a
printer.
Access endpoint circuit packs used: TN767
DS1 interface or TN760B tie trunk.
Data endpoint circuit packs used: TN726 data
line or TN754 digital line.
Trunk circuit packs used: TN767 DS1 inter-
face and TN760 tie trunk.
TN758 pooled modem circuit pack.
Data modules used: 700A or 700D PDM or
MPDM, 700B, C, or E TDM or MTDM, 7400D
series voice terminal or 7400B with PC/PBC.
TN744 call classifier circuit pack.
A selector console is used.
20 
						

							FEATURES
Feature
Audio Information
Exchange (AUDIX)
Automatic Call Distr-
bution (ACD)
Automatic Circuit
Assurance
Automatic Incoming
Call Display
Automatic Route
Selection
Hardware
TN742 or TN746B analog line circuit pack.
TN765 processor interface, MPDM for 2CA6
AUDIX. If PI is used, one port on a TN754
digital line, and an MTDM and MPDM.
One port on a TN742, TN746B, or TN769 ana-
log line circuit pack per auxiliary queue warn-
ing level lamp.
Each analog announcement requires
announcement equipment and one port on an
Analog Line circuit pack. Each integrated
announcement, which is accessed by a call,
requires one port on a TN750 integrated
announcement circuit pack.
If music is to be heard after the delay
announcement, a music source and a port on
a TN763B auxiliary trunk circuit pack is
required.
Display-equipped voice terminal. If the desti-
nation is not the terminal, a TN725 speech
synthesis circuit pack is used.
A display-equipped voice terminal, or a voice
terminal capable of displaying information
through an attached data terminal.
When this feature is used in a private network,
additional TN748C tone detectors, as well as
tie trunks can be required.
21 
						

							FEATURES
Feature
Automatic Wakeup
BCMS
Call-by-Call Service
Selection
Hardware
If voice prompting is used, a TN725B voice
synthesizer circuit pack is required. Each cir-
cuit pack has four ports to provide voice
prompting. If voice synthesis announcements
are used, two ports must be reserved for
announcements.
A Cook Electronic Recorder/Announcer or an
Audichron® Company model HQD614B
Recorder/Announcer and power supply is
installed in the auxiliary cabinet. Either
recorder/announcer requires a TN763B.
Any of the following connections can be used
to connect an asynchronous printer to the sys-
tem: the EIA port on the processor circuit
pack; PDM to a digital port; ADU to a data line
port.
A TN767 DS1 interface circuit pack is used for
a signaling link, and up to 23 ISDN-PRI trunk
group members. A TN741 or TN768 tone-
clock circuit pack, and a TN765 processor
interface circuit pack are used.
22 
						

							FEATURES
Feature
Call Detail Recording
(CDR)
Call Prompting
CallVisor® ASAI inter-
face
Hardware
Hardware requirements depend on the type of
output device used for SMDR.
A printer, personal computer or tape unit (Data
Terminal Equipment) — An MPDM to a port
on a TN754 digital line circuit pack or a 212A-
type modem to a port on a TN742 analog line
circuit pack. In the latter case, a standard
pooled modem is required for the data path.
Host computer — A private line terminated at
the System 85 with a trunk data module
(TDM). Also, a private line modem if the com-
puter is off-premises.
A TN726 data line circuit pack can be used in
conjunction with an Asynchronous Data Unit
(ADU) to connect a printer.
Each announcement requires a port on a
TN750 integrated announcement circuit pack
or announcement equipment and a port on a
TN742 or TN746B analog line. A maximum of
10 TN744 call classifier circuit packs can be
used.
The following circuit packs are used: TN744
tone detectors when an ASAI application
makes switch classified calls (such as a
predictive dialing outbound call management
application); TN7556 ISDN-BRI for use with an
ASAI BRI link; TN778 packet control for G3i
and G3s and TN1655 packet control for G3r.
A TN750 EI is used if there is an EPN.
23 
						

							FEATURES
Feature
Centralized Attendant
Service (CAS) (Branch
or Main)
Code Calling Access
Data Call Setup
Hardware
A TN760D tie trunk circuit pack is used.
Either a TN722B DS1 tie trunk circuit pack or
a TN767B DS1 interface circuit pack can also
be used for the release link trunks of the CAS
network.
Loudspeaker paging equipment and one port
on a TN763B auxiliary trunk circuit pack per
zone. These hardware requirements can be
shared with the Loudspeaker Paging Access
feature. A 278A adapter is used if the
customer’s equipment is not FCC-registered.
Each data module requires one port on a
TN754 digital line circuit pack. A digital termi-
nal data module (DTDM) shares the port with
a voice terminal.
Each AT&T personal computer (PC) requires
one port on a TN754 digital line circuit pack for
shared use of voice and data.
Each 7401D, 7404D, 7406D, or 7407D voice
terminal requires one port on a TN754 digital
line circuit pack for shared use of voice and
data.
Each modem requires one port on a TN742
analog line circuit pack.
24 
						

							FEATURES
Feature
Data Call Setup (continued)
Data-Only Off-Premises
Extensions
Distributed Communica-
tions System (DCS)
Features
Digital Multiplexed Interface
(DMI)
Direct Department Calling
and Uniform Call Distribu-
tion
Hardware
Modem pooling requires either a TN758
modem pool circuit pack or one digital port
with a TDM or MTDM, and one analog port
with analog modem for each conversion
resource.
Keyboard Dialing to off-premises (out-of-
building) data endpoints requires the use of a
TN748C tone detector circuit pack.
Extensive use of features and services using
tone detection may require additional TN748C
circuit packs. Several other features also use
a TN748C.
A TDM and one port on a TN754 digital line
circuit pack.
DCS interface hardware.
One of the following can be used: TN722B
DS1 circuit pack per 24 DMI trunks; one
TN767B; one TN464.
One port on a TN742 analog line circuit pack
per queue warning level lamp is used with
announcement equipment. If music is to be
heard after the delay announcement, a music
source and a port on a TN763B auxiliary trunk
circuit pack is used. A TN750 announcement
circuit pack provides up to 64 different
announcements.
25