ATT DEFINITY Communications System Generic 3 Instructions Manual

Issue  3   March 1996A-1 
A
System Parameters
Overview
This a p pendix provides information on the overall characteristics and capacities 
of the system.
The items presented in this chapter are grouped here for easy reference. 
However, most items are disc ussed under each applicable feature.
Administration Not Required
Administration is not required to activate the following features.
1. Attendant Auto-Manual Splitting
2. Attendant Call Waiting
3. Attendant Recall
4. Attendant Release Loop Operation
5....

System Parameters
A-2Issue  3   Marc h 1996 
14. Straightforward Outward Completion
15. Temporary Bridged Appearance
16. Through Dialing
17. Touch-Tone Dialing (for Terminals)
18. Transfer
Administration Required
Administration is required to activate the following features.
1. AAR/ARS Partitioning
2. Abandoned Call Search
3. Abbreviated Dialing
4. Ad d /Remove Skills
5. Administered Connections
6. Administration Without Hardware
7. Advice of Charg e
8. Alphanumeric Dialing
9. Alternate Facility...

Overview
Issue  3   March 1996
A-3
26. ACD - Auto-Available Split
27. Automatic Circuit Assurance
28. Automatic Route Selection
29. Auto Start/Don’t Split
30. Automatic Wakeup
31. Basic Call Management System
32. Brid ged Call Ap pearance — Multi-Ap pearance Voice Terminal
33. Brid ged Call Ap pearance  — Single-Line Voice Terminal
34. Busy Verification of Terminals and Trunks
35. Call-by-Call Service Selection
36. Call Coverage
37. Call Detail Recording
38. Call Forward Busy/Don’t Answer
39. Call...

System Parameters
A-4Issue  3   Marc h 1996 
59. Direct Inward Dialing
60. Direct Inward Dialing and Outward Dialing — International
61. Distinctive Ringing
62. Do Not Disturb
63. DS1 Tie Trunk Service
64. EIA Interface
65. Emergency Access to the Attendant
66. Enhanced Ab breviated Dialing
67. Expert Agent Selection
68. Extension Number Portability
69. Extended Trunk Access
70. Facility and Non-Facility Associated Signaling
71. Facility Busy Indication
72. Facility Test Calls
73. Forced Entry of Account...

Overview
Issue  3   March 1996
A-5
92. Loudspeaker Paging Access
93. Loudspeaker Paging Access — Deluxe
94. Malicious Call Trac e
95. Manual Message Waiting
96. Manual Originating Line Service
97. Manual Signaling
98. Merlin/System 25 Voice Terminal Support—731xH Series
99. Modem Poolin g
100. Multi-Appearance Preselection and Preference
101. Multiple Call Handling
102. Multiple Listed Directory Numbers
103. Music-on-Hold Access
104. Names Re gistration
105.Night Service
106. Off-Premises Station
107. PC...

System Parameters
A-6Issue  3   Marc h 1996 
125. Ringback Queuin g
126. Ringer Cutoff
127. Ringing—Ab breviated and Delayed
128. Rotary Dialin g
129. Security Violation Notification
130. Service Observing
131. Single-Digit Dialing and Mixed Station Numbering
132.Switch-Based Bulletin Board
133. Ten-Digit to Seven-Digit Conversion (G1.1)
134. Tenant Partitioning
135.Terminal Translation Initialization
136.Terminating Extension Group
137. Timed Reminder
138. Time of Day Routing
139. Touch-Tone Dialing...

Feature A c cess
Issue  3   March 1996
A-7
Feature Access
Dial Access Only
The following features or feature options can be activated and/or deactivated by 
dialing the assigned Feature Ac c ess Code or Trunk A c cess Code.
nAbbreviated Dialing:
— List 1
— List 2
— List 3
— Program
nAgent Call Handling
— Agent Log-In
— Agent Log-Out
— Manual-In
— Auto-In
— After Call Work
— Auxiliary Work
— Assist
nAP Demand Print
nAutomatic Route Selection
nAutomatic Callback (activate and deactivate) (applies to...

System Parameters
A-8Issue  3   Marc h 1996 
nControlled Restriction:
— Single Voice Terminal (activate and deactivate)
— Group of Voice Terminals (activate and d eactivate)
nData Origination (associated with Data Call Setup and Pooled Modem)
nData Privacy (associated with Data Call Setup and Pooled Modem)
nDo Not Disturb
nEmergency Access to the Attendant
nFacility Test Calls
nGeneralized Route Selection
nHunt Group Make Busy (activate and deactivate) (associated with Direct 
Department Calling and...

Feature A c cess
Issue  3   March 1996
A-9
— Next Messag e
— Help
— Call
Button Access Only
The following features or feature options must be assigned to a button. Feature 
Access Codes cannot be provided.
nAgent Change Alerting (alrt-agchg)
nAlternate Facilities Restriction Levels (attendant)
nAttendant Incoming Serial Calling (attendant)
nAttendant Intrusion (Call Offer) (attendant)
nAttendant Override (attendant)
nAutomatic Callback (applies to multi-appearance voice terminals only)
nAutomatic Circuit...

System Parameters
A-10Issue  3   Marc h 1996 
nIntercom:
— Automati c
— Dial
nLeave Word Calling:
— Delete Message
— Message Retrieval
— Next Message (also used with Integrated Directory)
— Return Call (also used with Integrated Directory)
nManual Message Waiting
nManual Signaling
nPersonal Central Office Line
nPrivacy — Manual Exc lusion
nProperty Management System Interface
— Message Waiting Notification (A ctivate)
— Message Waiting Notification (Deactivate)
— Checkout
nQueue Status  Indications
— NQC...