Home
>
ATT
>
Communications System
>
ATT DEFINITY Communications System Generic 1, Generic 3, System Management Instructions Manual
ATT DEFINITY Communications System Generic 1, Generic 3, System Management Instructions Manual
Here you can view all the pages of manual ATT DEFINITY Communications System Generic 1, Generic 3, System Management Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 151
SYSTEM BACKUP FOR DEFINITY G3vs One Memory Card is provided with the system. If a backup Memory Card has been purchased, the following procedure can be used to make a backup copy of the system translations and/or announcements. 1. 2. 3. 4. 5. 6. Remove the Memory Card from the TN777B Netcon circuit pack. Insert the backup Memory Card into the TN777B Netcon circuit pack. Log in to the administration terminal. Verify that the screen displays: enter command: Enter save translation and press [RETURN]. This...
Page 152
SYSTEM BACKUP FOR DEFINITY G3vs 9. The screen displays: save announcements SAVE ANNOUNCEMENTS ProcessorCommand Completion StatusError Code SPE_ASuccess0 Command successfully completely enter command: Screen 1-4. Save Announcements Screen-SPEA 10. 11. 12. 13. Verify that the Success message appears in the Command Completion Status field. If it does not, an error message will appear instead. Remove the backup Memory Card from the slot in which it is installed and insert the original Memory Card into that...
Page 153
SYSTEM BACKUP FOR DEFINITY G3vs Save and Restore Recorded Announcements Enter the save announcements command to save the recorded announcements in the system on the system Memory Cards. NOTE: A 4 Mb Memory Card is required to save and restore announcements. The system takes about 30 minutes to complete this task. Because the administration terminal is unavailable during this time, it is recommended that this command be used after business hours (or during slow business hours for a 24 hour business...
Page 154
SYSTEM BACKUP FOR DEFINITY G3vs Errors Memory Card-related failures may occur for two reasons: the card is at fault or the (TN777B) Netcon circuit pack is at fault. When these failures occur, the system responds with “error messages.”The following is a list of the error messages in alphabetical order and recommended responses to each. Check for proper operation after each response is done. You should also check the hardware error log for errors, and then use the maintenance manual or complete repair...
Page 155
SYSTEM BACKUP FOR DEFINITY G3vs 7. 8. 9. 10. File size exceeded You have run out of file space. Response: Call your AT&T representative. Invalid directory on memory card Indicates the Memory Card needs refreshing, or that something is wrong with the Memory Card. Response: Run test card-mem and be sure all tests pass. Replace the Memory Card. Memory Card is not inserted in the system You have not inserted the memory card. Response: Insert the Memory Card. Memory Card is write-protected Indicates the...
Page 156
SYSTEM BACKUP FOR DEFINITY G3vs 12. 13. 14. 15. Request is incompatible with currently running operations Indicates the storage system is in use. Response: Try again later. Saved copy of announcements is unusable The file on the Memory Card is unusable. Response: Use another backup card if you have one. Instances such as this illustrate the importance of having backup cards. Saved copy of translations is unusable The copy of the translations on your Memory Card is faulty. Response: Run the save...
Page 157
SYSTEM BACKUP FOR DEFINITY G3vs 16. 17.Unknown type of Memory Card The software does not know what type of Memory Card is inserted in the slot. This can occur if the card is unformatted or if the current vintage of the software does not recognize that type of Memory Card. Response: Replace the Memory Card with a formatted Memory Card the software can recognize. Upgrade Memory Card inserted You may have inserted the System Upgrade Memory Card instead of the 4 Mb Memory Card. Response: Insert the 4 Mb...
Page 158
Index A Announcements restore, 1-5 B Backup, 1-1 G3VS System, 1-1 using Memory Cards, 1-1 Backup Recorded Announcements, 1-5 Backup System, 1-1 C Commands Backup Recorded Announcements, 1-5 Save Recorded Announcements, 1-5 E Error messages, 1-6 Errors, 1-6 MR Recorded Announcements Backup, 1-5 Command, 1-5 Restore Recorded Announcements, 1-5 S Save Announcements, 1-5 Save Changes Additions, 1-1 Save Data in Memory, 1-1 Save Information in Memory, 1-1 Save Recorded Announcements, 1-5 Command, 1-5 Save...