ATT DEFINITY Communications System Generic 1, Generic 3, System Management Instructions Manual

Index
Index
M
AMemory Card Failures, 14
Memory Cards, 1-1
Errors, 1-4
AnnouncementsFailures, 14
restore, 1-1
P
B
Backup, 1-1
for a G3s System, 1-1
G3s System, 1-1
using Memory Cards, 1-1
Backup Memory Card(s)
for a G3s System, 1-1
Backup Recorded Announcements, 1-1
Backup System, 1-1
C
Perform Backup
for a G3s System, 1-1
R
Recorded Announcements
Backup, 1-1
command, 1-1
Remove and Replace Memory Cards
for G3s System Backup, 1-1
Restore Recorded Announcements, 1-1
commands
Used to Backup Recorded...

Index
T
Time Required
to do a Backup on Recorded
Announcements, 1-1
W
When to
Save Recorded Announcements, 1-1
I-2 

AT&T 555-230-500ADD2
Issue 1, January 1992
Dated March 1993
DEFINITY
®Communications System
Generic 1 and Generic 3
System Management Addendum
(G3vs Customers Only) 

©1993 AT&T
All Rights Reserved
Printed in USA
Notice
While reasonable effort was made to ensure that the information in this document was
complete and accurate at the time of printing, AT&T cannot assume responsibility for any
errors. Changes and/or corrections to the information contained in this document maybe
incorporated into future issues.
Your Responsibility for Your System’s Security
You are responsible for the security of your system.AT&T does not warrant that this product
is immune from or will...

Contents
About this Documenti
n Overviewi
n Organizationii
1SYSTEM BACKUP FOR DEFINITY G3VS1-1
n Save Translation1-1
n Save and Restore Recorded Announcements1-5
n Errors1-6
IIndexI-1
i 

Screens
1SYSTEM BACKUP FOR DEFINITY G3VS
1-1.Save Translation Screen-SPEA1-2
1-2.Save Announcements Screen-SPEA1-2
1-3.Save Translation Screen-SPEA1-3
1-4.
Save Announcements Screen-SPEA1-4
ii 

About this Document
Overview
This addendum provides specific information for performing a System Backup for
a DEFINITY® Communications System Generic 3vs (G3vs) switch release. Its
function is as a supplement to, and is intended to be used in conjunction with, the
information already provided in DEFINITY Communications System Generic 1
and Generic 3 System Management, 555-230-500, Issue 1.
For additional information on DEFINITY Generic 3vs, refer to DEFINITY Generic
3
VS Feature Description,...

About this Document
Organization
In the interest of brevity, only G3VS specific information is provided in this
addendum. Refer to the appropriate section in DEFINITY Communications
System Generic 1 and Generic 3 System Management, 555-230-500,
Issue 1, when performing other administration tasks.
This document consists of the following chapters:
Introduction —Describes this document.
System Backup for DEFINITY G3VS —Describes the tasks involved in backing
up the DEFINITY G3
VS system, including...

SYSTEM BACKUP FOR
DEFINITY G3
VS
1
The backup system for the DEFINITY G3VS system employs a Memory Card.
The standard Memory Card is a 1 Mb card for systems without a TN750
announcement circuit pack. It does not have high or critical reliability. In case of
a power failure, the system translations and announcements can be restored
using the Memory Card.
Save Translation
Translation data can be automatically saved every 24 hours. However, if your
translation data changes frequently, you should also save...

SYSTEM BACKUP FOR DEFINITY G3vs
4. Enter save translation
and press [RETURN].
 This command instructs
the system to take all translation information in memory and transfer it into
the Memory Card.
5. The screen displays:
Error Code
0
save translation
SPE A
SAVE TRANSLATION
Processor
Command Completion Status
SPE_ASuccess
Command successfully completely
enter command:
Screen 1-1. Save Translation Screen—SPEA
6. Verify that the Success
message appears in the Command Completion
Status field. If it does not,...