Home > ATT > Communications System > ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

Here you can view all the pages of manual ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 291

INDEXIN-5
D-channel — 
Contd
primary 7-59
signaling 1-4
dial
access code 7-26
Dial Plan Record screen settings E-14
plan screens settings E-26
pulse addressing 2-14
tone 2-6, 2-14
dialed-number identification service (DNIS) A-1
dialing, cut-through 1-27
DID
port family 6-10
trunk administration 6-11
trunk and DPO channel units 2-8
trunk group C-6
trunk ports, CO 4-6
trunk type on 4ESS 2-6
unit loss 4-6
differences between System 85 R2V1, V2, V3,
and V4 7-6
digit
collection C-8
sending trunk groups 1-27...

Page 292

IN-6INDEX
DMI — Contd
RBS 1-8
signaling types 1-14
terminal-equipment connections 2-9
trunk 6-5
vendor support 2-4
with CDMs 2-10
DMI-MOS 1-14
DNIS A-1
DS1
1s-density requirement 1-17
24th channel signaling 1-14
administration 1-23
channel assignments (Generic 2) 7-98
channel assignments (System 85) 7-14
channel versus trunk assignments 7-38
all-0s octet 1-18
AMI 1-16
assignments C-10
B8ZS line coding 1-17
bit rate 3-1
bit stream 1-18
bundling signaling 2-11
CDM 2-9
channel bank termination 4-6
circuit...

Page 293

INDEXIN-7
equipment parameters and permitted translation
encodes 7-58
ER channel unit 2-5
errored second (ES) 8-10
ES 8-10
ESF
framing format
ANN11C/ANN11E feature comparison
6-2
description 1-11
DS1 signal 8-8
reliability 7-58
restrictions 2-3
superframe 1-13
excessive slips 8-8
extended digital subscriber line (EDSL) 2-15
extended superframe (ESF) 1-11, 2-3
external clock reference 5-14, 7-6
external reference selection rules 5-27
externally referenced nodes 5-18
F
facility alarms 8-8
facility...

Page 294

IN-8          INDEX
I
I.412 1-3
I.431 1-3
I.441 1-3
I.451 1-3
IBM IDNX multiplexer to another system 2-4
IDNX multiplexer 2-4, 6-3
IDSN
Advantage, 6500 1-21
IE 1-16
BC C-1
BCC 1-29
called party 1-29, C-9
called party number C-8
channel ID 2-2
connected number 1-32
display 1-32, C-5
NSF 1-29
NSF (Generic 2) C-15
NSF (System 85 R2V4) C-14
NSF (System 85 R2V4 and Generic 2) C-6,
C-13
opcode translations C-12
inband signaling 1-14
incoming call handling table 7-146, E-25
information
element (IE) 1-16, 1-29,...

Page 295

INDEXIN-9
L
LAPD 1-3, 7-17
LATA 2-7
layer 1 1-3
layer 2 1-3
LEC
5ESS 2-7, 2-15
carrier facilities 6-1
DS1 connections to 3-9
DS1 reference B-11
IXC 7-142
NXX 7-19
synchronization reference B-12
synchronization source 5-28
LFA alarm 8-8
line
coding
AMI 1-16
B8ZS 1-17, 2-3, 2-7
bipolar 1-16
formats 1-2, 1-16
framing 2-14
signaling 2-14
ZCS 1-17, 2-5, 2-7
compensation settings 7-114, 7-130
equalizer and compensation settings 3-13
only mode 5-29, 6-6
repeater 3-3
+trunk mode 5-30, 6-7
link synchronization...

Page 296

IN-10          INDEX
MFAT carrier 6-13
microwave digital radio 3-2
Minor/Major alarm to errored seconds
conversions 8-10
misframe 1-10, 1-13
MO 8-6
mode
data
0 (Generic 2) 1-25
0 (System 85) 1-24
1 (Generic 2) 1-25
1 (System 85) 1-24
2 (Generic 2) 1-24
2 (System 85) 1-24
3 (Generic 2) 1-25
3 (System 85) 1-24
3/2 adaptive (Generic 2) 1-24
64K-bps 1-8
64K-bps (modes 0-3) 1-2
adaptive (mode 3/2) 1-24
BC 7-46
switching (2/3) 1-21
unknown analog (Generic 2) 1-25
unknown digital (Generic 2) 1-25
voice (Generic...

Page 297

INDEXIN-11
network — Contd
difficulties 2-1
digital transmission 3-1
engineering 5-18
feature 7-103, 7-106
high-speed multiplexers 1-20
identifier
AAR tables 7-108
ARS tables 7-105
NSF IE C-13
service 7-103, 7-106
service value C-13
service/feature options 7-46
services/network features 7-104
side
asymmetrical design 1-30
Generic 1 7-132
Generic 2 7-68
glare 2-2
specification C-10
System 85 7-17
vendor switch connection 2-13
specific facilities (NSF) 2-15, C-6
synchronization
definition 5-1
engineering...

Page 298

IN-12          INDEX
operating mode — Contd
System 85 DS1 — Contd
line-only 6-6
line+trunk 6-7
OPS
ports 4-7, 6-7
to another system 2-5
OSI 1-3
other service/facility options (DMI-MOS/ISDN-
PRI only) 7-16
other vendor digital switch to another system,
connecting 2-4
P
packet switching 1-10
pad group 4-2
parameterized-service format 7-104
partitioning 7-19, 7-78
PC/ISDN 1-22
PCM 1-8, 5-1
PCM data 1-8
PC/PBX Connection 1-22, 1-24
PDS wiring 2-5
per-channel drop and insert capability 6-2
port
family 6-10...

Page 299

INDEXIN-13
RBS — 
Contd
and CDM 2-10
and D4-channel banks 2-5
and DACS 2-8, 2-15
and DMI-BOS 7-115, 7-131
and DS1 facilities 7-60
and T1 facilities 7-10, 7-60
and VBR signaling differences 2-11
mode 1 data calls 7-9
on primary/secondary facilities 7-11
VBR 2-11
red alarm 8-5, 8-8
reference
facility
primary 5-24
secondary 5-24
frequency 2-15
AT&T 2-7, 5-28
Bell System 2-7
primary 5-23
secondary 5-23
selection rules
external 5-27
internal 5-19
references xxiv
remote frame alarm (RFA) 8-9
repeater
line 3-3...

Page 300

IN-14          INDEX
signaling — Contd
reverse-battery (E&M) 2-6
robbed-bit 1-14
B8ZS 2-7
D4 framing 2-5
definition 1-14
DS1/DMI-BOS connection to D4-channel
bank 2-5
VBR 2-11
ZCS 2-7
system number 7 7-30, 7-92
trunks supporting type 20 7-25, 7-31, 7-87,
7-93
type
compatibility D-7
definitions D-8
variable bit robbed (VBR) 2-11
signals, channel 1-7
SLC 2-7
SLIM 2-7
slip 1-17, 8-8
controlled 5-3
excessive 8-8
slot
virtual 6-7
slot, virtual 6-6
Software Defined Network (SDN) 1-31
software operation, System...
Start reading ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

Related Manuals for ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

All ATT manuals