Home
>
ATT
>
Communications System
>
ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual
ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual
Here you can view all the pages of manual ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 291
INDEXIN-5 D-channel — Contd primary 7-59 signaling 1-4 dial access code 7-26 Dial Plan Record screen settings E-14 plan screens settings E-26 pulse addressing 2-14 tone 2-6, 2-14 dialed-number identification service (DNIS) A-1 dialing, cut-through 1-27 DID port family 6-10 trunk administration 6-11 trunk and DPO channel units 2-8 trunk group C-6 trunk ports, CO 4-6 trunk type on 4ESS 2-6 unit loss 4-6 differences between System 85 R2V1, V2, V3, and V4 7-6 digit collection C-8 sending trunk groups 1-27...
Page 292
IN-6INDEX DMI — Contd RBS 1-8 signaling types 1-14 terminal-equipment connections 2-9 trunk 6-5 vendor support 2-4 with CDMs 2-10 DMI-MOS 1-14 DNIS A-1 DS1 1s-density requirement 1-17 24th channel signaling 1-14 administration 1-23 channel assignments (Generic 2) 7-98 channel assignments (System 85) 7-14 channel versus trunk assignments 7-38 all-0s octet 1-18 AMI 1-16 assignments C-10 B8ZS line coding 1-17 bit rate 3-1 bit stream 1-18 bundling signaling 2-11 CDM 2-9 channel bank termination 4-6 circuit...
Page 293
INDEXIN-7 equipment parameters and permitted translation encodes 7-58 ER channel unit 2-5 errored second (ES) 8-10 ES 8-10 ESF framing format ANN11C/ANN11E feature comparison 6-2 description 1-11 DS1 signal 8-8 reliability 7-58 restrictions 2-3 superframe 1-13 excessive slips 8-8 extended digital subscriber line (EDSL) 2-15 extended superframe (ESF) 1-11, 2-3 external clock reference 5-14, 7-6 external reference selection rules 5-27 externally referenced nodes 5-18 F facility alarms 8-8 facility...
Page 294
IN-8 INDEX I I.412 1-3 I.431 1-3 I.441 1-3 I.451 1-3 IBM IDNX multiplexer to another system 2-4 IDNX multiplexer 2-4, 6-3 IDSN Advantage, 6500 1-21 IE 1-16 BC C-1 BCC 1-29 called party 1-29, C-9 called party number C-8 channel ID 2-2 connected number 1-32 display 1-32, C-5 NSF 1-29 NSF (Generic 2) C-15 NSF (System 85 R2V4) C-14 NSF (System 85 R2V4 and Generic 2) C-6, C-13 opcode translations C-12 inband signaling 1-14 incoming call handling table 7-146, E-25 information element (IE) 1-16, 1-29,...
Page 295
INDEXIN-9 L LAPD 1-3, 7-17 LATA 2-7 layer 1 1-3 layer 2 1-3 LEC 5ESS 2-7, 2-15 carrier facilities 6-1 DS1 connections to 3-9 DS1 reference B-11 IXC 7-142 NXX 7-19 synchronization reference B-12 synchronization source 5-28 LFA alarm 8-8 line coding AMI 1-16 B8ZS 1-17, 2-3, 2-7 bipolar 1-16 formats 1-2, 1-16 framing 2-14 signaling 2-14 ZCS 1-17, 2-5, 2-7 compensation settings 7-114, 7-130 equalizer and compensation settings 3-13 only mode 5-29, 6-6 repeater 3-3 +trunk mode 5-30, 6-7 link synchronization...
Page 296
IN-10 INDEX MFAT carrier 6-13 microwave digital radio 3-2 Minor/Major alarm to errored seconds conversions 8-10 misframe 1-10, 1-13 MO 8-6 mode data 0 (Generic 2) 1-25 0 (System 85) 1-24 1 (Generic 2) 1-25 1 (System 85) 1-24 2 (Generic 2) 1-24 2 (System 85) 1-24 3 (Generic 2) 1-25 3 (System 85) 1-24 3/2 adaptive (Generic 2) 1-24 64K-bps 1-8 64K-bps (modes 0-3) 1-2 adaptive (mode 3/2) 1-24 BC 7-46 switching (2/3) 1-21 unknown analog (Generic 2) 1-25 unknown digital (Generic 2) 1-25 voice (Generic...
Page 297
INDEXIN-11 network — Contd difficulties 2-1 digital transmission 3-1 engineering 5-18 feature 7-103, 7-106 high-speed multiplexers 1-20 identifier AAR tables 7-108 ARS tables 7-105 NSF IE C-13 service 7-103, 7-106 service value C-13 service/feature options 7-46 services/network features 7-104 side asymmetrical design 1-30 Generic 1 7-132 Generic 2 7-68 glare 2-2 specification C-10 System 85 7-17 vendor switch connection 2-13 specific facilities (NSF) 2-15, C-6 synchronization definition 5-1 engineering...
Page 298
IN-12 INDEX operating mode — Contd System 85 DS1 — Contd line-only 6-6 line+trunk 6-7 OPS ports 4-7, 6-7 to another system 2-5 OSI 1-3 other service/facility options (DMI-MOS/ISDN- PRI only) 7-16 other vendor digital switch to another system, connecting 2-4 P packet switching 1-10 pad group 4-2 parameterized-service format 7-104 partitioning 7-19, 7-78 PC/ISDN 1-22 PCM 1-8, 5-1 PCM data 1-8 PC/PBX Connection 1-22, 1-24 PDS wiring 2-5 per-channel drop and insert capability 6-2 port family 6-10...
Page 299
INDEXIN-13 RBS — Contd and CDM 2-10 and D4-channel banks 2-5 and DACS 2-8, 2-15 and DMI-BOS 7-115, 7-131 and DS1 facilities 7-60 and T1 facilities 7-10, 7-60 and VBR signaling differences 2-11 mode 1 data calls 7-9 on primary/secondary facilities 7-11 VBR 2-11 red alarm 8-5, 8-8 reference facility primary 5-24 secondary 5-24 frequency 2-15 AT&T 2-7, 5-28 Bell System 2-7 primary 5-23 secondary 5-23 selection rules external 5-27 internal 5-19 references xxiv remote frame alarm (RFA) 8-9 repeater line 3-3...
Page 300
IN-14 INDEX signaling — Contd reverse-battery (E&M) 2-6 robbed-bit 1-14 B8ZS 2-7 D4 framing 2-5 definition 1-14 DS1/DMI-BOS connection to D4-channel bank 2-5 VBR 2-11 ZCS 2-7 system number 7 7-30, 7-92 trunks supporting type 20 7-25, 7-31, 7-87, 7-93 type compatibility D-7 definitions D-8 variable bit robbed (VBR) 2-11 signals, channel 1-7 SLC 2-7 SLIM 2-7 slip 1-17, 8-8 controlled 5-3 excessive 8-8 slot virtual 6-7 slot, virtual 6-6 Software Defined Network (SDN) 1-31 software operation, System...