AT&T Inidv2 I3812v Urer Guide

							Configuring Services
67
3.Click Time Schedule; The Time of Day Access Schedule page opens.
4.Select the device you want to schedule. (The device you selected is indicated by “You have chosen…”).
5.Select the type of the access you allow on the device. 
−If you select 
Full access, click Save. 
−If you select 
Based on allowed time schedule, continue with the next step. 
6.Click to select the type of access that you allow, and the days and time you want to restrict from the 
corresponding drop-down lists. 
Note: By default, the device is set to Full Access. 
Note: You can block two different schedules for each access category.  
						

							iNID -- i3812V User Guide
68
7.Click Save; a message appears informing the configuration status. 
8.Click Summary; the Access Control page opens displaying the current configuration, for example,
Note: To change restricted access to full access, select Full access and click 
Save. You do not need to deselect the access type or days and time. 
						

							Configuring Services
69
Configuring Content Screening
The content screening feature enables you to block specific computers from being able to view 
objectionable material online. You can customize the content screening for two separate groups: Kids and 
Teens. Configuring content screening requires these sequential tasks:
 Assign a computer to a group on page 69
 Set restrictions on groups on page 70
 Specify Web sites on page 72
Assigning a Computer to a Group 
To assign a computer to a group:
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface. 
2.Click Ser vices and select Access Control; the Access Control page opens displaying a a list of connected 
devices and any access restrictions for each device.  
						

							iNID -- i3812V User Guide
70
3.Click Content Screening; the Content Screening page opens.
4.Select from the drop-down list to assign the computer to either the “Teens” or “Kids” group. 
5.Click Save; a message appears informing you the configuration status. 
Setting Restrictions on Groups
There are two ways to restrict the type of programs each group can access: by category or by Web sites. 
Specifying Web sites override the content categor y settings. 
Specifying Content Categories
By default, each group is blocked to view different a categor y of programs, for example, the Kids group has 
access only to the Kid’s sites categor y. Categories are set by the domain name, not by a specific Web site, 
for example, disney.com is considered as the kid’s sites. 
To unblock or block content categories:
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface. 
2.Click Ser vices and select Access Control; the Access Control page opens displaying a a list of connected 
devices and any access restrictions for each device.  
						

							Configuring Services
71
3.Click Content Screening; the Content Screening page opens.
4.Scroll down to the Customize Content Screening Groups pane. 
						

							iNID -- i3812V User Guide
72
5.Select or deselect the checkbox to block or unblock the category. 
6.Click Save. 
Specifying Web Sites 
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface. 
2.Click Ser vices and select Access Control; the Access Control page opens displaying a a list of connected 
devices and any access restrictions for each device. 
3.Click Content Screening; the Content Screening page opens. 
						

							Configuring Services
73
4.Scroll down to the Block or Allow Access to Specific Sites pane.
5.Enter the site IP address or name in the Site URL field for the intended group, for example, Ya h o o . c o m. 
6.Select the intended access type: Block or Allow.
7.Click Add to List; a message appears informing you the configuration status. The Web site you entered 
appears under the corresponding list, for example. 
						

							iNID -- i3812V User Guide
74
8.Select the sites you want to block or allow, or click Enable Blocked List to block or Enable Allowed List to 
allow access to all sites on the list. 
Configuring Web Remote Access
The remote access feature enables you to access your local network from outside your home using the 
Internet. You can access shared files on PCs, manage ser vices, view cameras, or remotely administer your 
system from anywhere. 
To set up remote access:
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface. 
2.Click Services and select Remote Access; the Remote Access page opens. 
						

							Configuring Services
75
3.Select the Remote Access checkbox to enable the remote access feature. 
4.Select the Access shared files checkbox if you want to enable the shared files feature. 
5.Click Edit Domain Name to enter your domain name that you will need to enter 
6.Enter a password containing at least eight alphanumeric characters in the Enter new password field. 
7.Confirm your password in the corresponding field. 
8.Select the Enhanced login protection checkbox to prevent repeated “guessing” of the Web Remote 
Access password.
9.Select from the corresponding drop-down lists to temporarily suspend remote access after a number of 
failed login attempts.
10.Change the default HTTP and SSL ports if you are hosting a Web server on your network to avoid por t 
conflicts with your Web ser ver. 
11.Click Save. 
Note: You will need to enter this domain name into a Web browser when you 
access your system remotely.
Note: You will need to enter this password when you access your system 
remotely. 
Note: It is recommended to leave the added security value as enabled (the 
default value).  
						

							iNID -- i3812V User Guide
76
Accessing Your Local Network Using Web Remote Access
For best results, ensure that your operating system has been properly configured for file sharing before 
attempting to access files remotely. For more information on enabling your operating system for file sharing, 
see the 2Wire support Web site or review the online help system by clicking the Help link on the 2Wire 
gateway home page. 
To access your home network:
1.Open the browser and type your personal domain name into the address line (for example, 
jonesfamily.accessmyhome.net); the Welcome to the Remote Access Center page opens.
Notes:  If you change the Web Remote Access default port settings, type the 
new por t numbers along with your personal domain name when accessing 
Web Remote Access. For example, if your domain name is 
jonesfamily.accessmyhome.net and the HTTP por t is changed to 8080, you 
will type http://jonesfamily.accessmyhome.net:8080. 
When connecting to your home network using Web Remote Access, you may 
see a security aler t from your browser. If you are prompted with this 
message, click 
Ye s to proceed to the Remote Access Center.