AT&T Inidv2 I3812v Urer Guide

							Finding Solutions
97
Note: The number of DSL lines displays is dependent on the number of lines 
in use.  
						

							iNID -- i3812V User Guide
98
Viewing the VoIP Service Status
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface; the 
Home page opens, displaying the aggregate upstream and downstream bandwidths. 
2.Click Services; the following page opens. 
						

							Finding Solutions
99
3.Click Vo i ce; the Status page opens.
4.Click Line; the Lines page opens, displaying the operational state as well as the phone and por t 
numbers associated with each line. 
Note: The voice-over-IP ser vice is disabled if you have not subscribed to the 
service.  
						

							iNID -- i3812V User Guide
100
5.Click Stats, a page opens displaying information for each line including state and status, voice ser ver 
registration, call summar y, and call statistics.  
						

							Finding Solutions
101
Viewing the Wireless AP Statistics 
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface; the 
Home page opens, displaying the aggregate upstream and downstream bandwidths.
2.Click Home Networking; the LAN Status page opens. 
						

							iNID -- i3812V User Guide
102
3.Click Statistics; a page opens displaying the wireless access point information. 
If you have multiple access points, each access point and its associated statistics are listed 
separately.
4.View total received and transmitted packets and bytes as well as total errors and discarded packets. 
Viewing LAN Status 
To access the LAN status page: 
1.Enter http://gateway.2wire.net. The user interface Home page opens, displaying the aggregate 
upstream and downstream bandwidths.  
						

							Finding Solutions
103
2.Click Settings; the Settings page opens displaying the system information and more sub-tabs. 
3.Click LAN; a page opens displaying all your local network devices and their status. 
From this page, you can view the following status.
−Private network.
−Enabled interfaces.
−Wireless network.
−Devices associated with the interface.
−Traffic statistics for Ethernet ports, wireless AP, and HPNA network. 
						

							iNID -- i3812V User Guide
104
Your private network IP 
information. 
The enabled interfaces.
Your wireless network setup.
Devices associated with interfaces.
Traffic statistics. 
						

							Finding Solutions
105
Performing On-demand HPNA Tests
The i3812V enables you to collect HPNA test data for diagnostics purposes. The HPNA network 
performance management data provides diagnostic information to identify and isolate home network 
connectivity issues. Typically, you initiate this test when you experience connectivity issues with your IPTV 
and/or HPNA phone lines. The test results show traffic handling between every node in your home network. 
You can save the most current available HPNA results, save and retrieve them later for comparison. 
1.Open a Web browser and enter http://gateway.2Wire.net to access the 2Wire i3812V user interface; the 
Home page opens, displaying the aggregate upstream and downstream bandwidths. 
						

							iNID -- i3812V User Guide
106
2.Click Home Networking; the LAN Status page opens.
3.Click Statistics; the page opens displaying the wireless access point information.