Apple macbook pro 17 inch mid 2010 User Manual
Here you can view all the pages of manual Apple macbook pro 17 inch mid 2010 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 151
MacBook Pro (17-inch, Mid 2010) Take Apart — Optical Drive Flex Cable 151 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick Removal 1 Handle optical drive by sides only. 2 With a black stick or fingernail, carefully wiggle flex cable off optical drive.
Page 152
MacBook Pro (17-inch, Mid 2010) Take Apart — Hard Drive Connector Cable 152 2010-06-11 First Steps Remove: • Bottom case • Rear hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Hard Drive Connector Cable
Page 153
MacBook Pro (17-inch, Mid 2010) Take Apart — Hard Drive Connector Cable 153 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Remove 4 screws: • 2 (1.8-mm) 922-8983 at shield • 2 (2.2-mm) 922-8329 at cable 2 Remove shield. 3 Use black stick to disconnect cable and carefully pry cable up from adhesive.
Page 154
MacBook Pro (17-inch, Mid 2010) Take Apart — Battery Indicator Light (BIL) Cable and Board 154 2010-06-11 First Steps Remove: • Bottom case • Rear hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Battery Indicator Light (BIL) Cable and Board
Page 155
MacBook Pro (17-inch, Mid 2010) Take Apart — Battery Indicator Light (BIL) Cable and Board 155 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick • Piece of tape Removal 1 Remove 2 (1.8-mm) 922-8983 screws from the shield. 2 Remove shield. 3 Place tape over BIL button on outside of top case. 4 Remove 3 (1.8-mm) 922-9069 screws from BIL board. Replacement Note: Replace screws in order shown.
Page 156
MacBook Pro (17-inch, Mid 2010) Take Apart — Battery Indicator Light (BIL) Cable and Board 156 2010-06-11 5 Flip over board. 6 Lift lever to disconnect cable from logic board. Note: The tape will prevent the BIL button from falling out of top case. Replacement Note: Before replacing the BIL board, check that: • the long rubber gasket is assembled on top of the LED row • the BIL button is installed in the top case
Page 157
MacBook Pro (17-inch, Mid 2010) Take Apart — Hard Drive Bracket, Front 157 2010-06-11 First Steps Remove: • Bottom case • Rear hard drive bracket • Hard drive Caution: Make sure data is backed up before removing the hard drive. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Hard Drive Bracket, Front
Page 158
MacBook Pro (17-inch, Mid 2010) Take Apart — Hard Drive Bracket, Front 158 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Remove 2 (10-mm) 922-8648 screws. 2 Tilt out bracket. Replacement Note: Make sure 2 rubber gaskets are installed before installing screws.
Page 159
MacBook Pro (17-inch, Mid 2010) Take Apart — Display Assembly 159 2010-06-11 First Steps Remove: • Bottom case • Camera cable guide • LVDS cable guide Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Display Assembly
Page 160
MacBook Pro (17-inch, Mid 2010) Take Apart — Display Assembly 160 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Torx T6 screwdriver • Foam wedge fixture Removal 1 Open the display to 90 degrees, and place the computer on the foam wedge service fixture. 2 Remove 6 (6.5-mm) Torx 922-8925 screws: 3 Separate display assembly from top case.