Apple macbook pro 17 inch mid 2010 User Manual
Here you can view all the pages of manual Apple macbook pro 17 inch mid 2010 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 171
MacBook Pro (17-inch, Mid 2010) Take Apart — AirPort/Bluetooth Holder 171 2010-06-11 4 Lift out holder and turn it over. 5 Remove 2 (3 mm) 922-9200 card screws. 6 Transfer card to new holder. Replacement Note: Make sure connectors are fully seated, and the length of the cables are tucked into their channels. Replacement Note: Be sure grounding clip fingers contact the small top case pocket.
Page 172
MacBook Pro (17-inch, Mid 2010) Take Apart — AirPort/Bluetooth Card 172 2010-06-11 First Steps Remove: • Bottom case Refer to AirPort/ Bluetooth Holder to flip over (but not remove) holder Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. AirPort/Bluetooth Card
Page 173
MacBook Pro (17-inch, Mid 2010) Take Apart — AirPort/Bluetooth Card 173 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Phillips #00 screwdriver Removal 1 Remove 2 (3 mm) 922-9200 card screws. 2 Transfer new card to AirPort/Bluetooth holder.
Page 174
MacBook Pro (17-inch, Mid 2010) Take Apart — AirPort/Bluetooth Card 174 2010-06-11 Replacement Note: Make sure connectors are fully seated, and the length of the cables are tucked into their channels. Replacement Note: Be sure grounding clip fingers contact the small top case pocket.
Page 175
MacBook Pro (17-inch, Mid 2010) Take Apart — Right Speaker/Subwoofer 175 2010-06-11 First Steps Remove: • Bottom case • Optical drive Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Right Speaker/Subwoofer
Page 176
MacBook Pro (17-inch, Mid 2010) Take Apart — Right Speaker/Subwoofer 176 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Phillips #00 screwdriver Removal 1 Remove 3 screws: • 1 (2.75-mm) 922-8662 • 2 (12.4-mm) 922-8982 2 Disconnect speaker cable from logic board.
Page 177
MacBook Pro (17-inch, Mid 2010) Take Apart — Right Speaker/Subwoofer 177 2010-06-11 3 Loosen from adhesive at side and remove speaker. Replacement Caution: Do not touch sensitive speaker cones.
Page 178
MacBook Pro (17-inch, Mid 2010) Take Apart — Logic Board 178 2010-06-11 First Steps Remove: • Bottom case • Memory • Fans Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Logic Board
Page 179
MacBook Pro (17-inch, Mid 2010) Take Apart — Logic Board 179 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Torx T6 screwdriver • Phillips #00 screwdriver Removal 1 Remove 4 screws: • 2 T6 (3.3-mm) 922- 9108 • 2 #00 (1.8-mm) 922- 8983 2 Lift away 2 shields.
Page 180
MacBook Pro (17-inch, Mid 2010) Take Apart — Logic Board 180 2010-06-11 3 Refer to Connector Types to carefully disconnect 12 cables: • LVDS • keyboard backlight • camera • AirPort/Bluetooth • optical drive • right speaker • IR/sleep • trackpad • keyboard power • ExpressCard • hard drive connector • battery indicator light (BIL) Replacement Note: These cables have pull tabs to assist with reinstallation: • keyboard power • ExpressCard Before installing the two shields, fold the pull tabs...