AOR AR One Ultra Wide Band Reciever Instructions Manual

 70 
 
7-3-16 AF GAIN 
AG AGnnn      (nnn: 000 –255)     Default: 255 
Note: The volume control knob must be turned fully counterclockwise   
To read: AG  
Response:   AG nnn 
 
7-3-17 MANUAL GAIN (10.7 MHz AGC) 
MG 
 MGnnn      (nnn: 000 – 255)     Default: 255 
Note: Available only when the AGC is set to OFF 
To read: MG  
Response:    MG nnn 
 
7-3-18 RF GAIN 
RG 
 RGnnn      (nnn: 000 – 255)     Default: 255 
Note: The volume control knob must be turned fully 
counterclockwise 
To read: RG...

 71 
  LM  To read: LM  
NSQm LMnnn    --- When the noise squelch is selected 
(nnn: 000 – 999) 
LSQm LMnnn    --- When the level squelch is selected 
(nnn: 000 – 999) 
m: 1    when the squelch is closed 
Response 
 
m: 0    when the squelch is opened 
 
7-3-22 AUTO SIGNAL LEVEL 
 LC              LCn   (n: 0 or 1)     
n:0    Auto Signal Level off 
n:1    Auto Signal Level on 
While n is set to 1, and the squelch is opened, a signal level and frequency data 
will be sent 
LSQm LMnnn    --- When the level...

 72 
BLn        (n: 0 or 1)      Available when LA is set to 2 (Auto). 
n: 0    BACKLIT OFF 
BL 
 
 
n: 1    BACKLIT ON (Default) 
To read: BL 
Response:    BLn 
 
7-3-25 BACKLIT DIMMER 
LDn    (n: 0 or 1)    
n: 0    NORMAL (Default) 
 LD 
n: 1  DIMM 
To read: LD 
Response:    LDn 
 
7-3-26 LCD CONTRAST 
LV  LVnn    (nn: 00 – 31)    (Default: 12) 
To read: LV 
Response:   LVnn 
 
7-3-27 BEEP LEVEL 
BL BLn     (n: 0 – 9)       (Default: 5) 
To read: BL 
Response:   BLn 
 
7-3-28 SPEAKER SELECT 
SO SOn...

 73 
  n: 1    ON 
To read: PO 
Response:    POn 
 
7-3-30 DELAY TIME (SCAN DELAY AND SEARCH DELAY) 
DD 
 DDn.n    (n.n: 0.0 – 9.9 second)      Default: 2.0 sec. 
        nn:  FF  (hold) 
To read: DD 
Response:  DDn.n  or  DDFF 
 
7-3-31 FREE SCAN 
SP 
 SPn.n  (n.n: 0.0 – 9.9 second)    
      n.n : 0.0    FREE SCAN OFF (Default) 
       n.n: 0.1 – 9.9 sec. 
To read: SP 
Response:  SPn.n  
 
7-3-32 SIGNAL METER DISPLAY 
SF 
 SFn   (n: 0 – 2)    
   n: 0  ANALOG DISPLAY 
   n: 1  DIGITAL DISPLAY in dBuV...

 74 
To read: OL 
Response:   OLmm nnnnnnnnnn (10 digit) 
 
7-3-35 SIGNAL LEVEL UNIT (in dBuV) – Read only 
LU LU nnn          (-nnn – nnn) dBuV 
To read: LU 
Response:   LU nnn 
 
7-3-36 SIGNAL LEVEL UNIT (in dBm) – Read only   
LB LB nnn          (-nnn – nnn) dBm 
To read: LU 
Response:   LB nnn 
 
 
 
 
 
 
 
7-3-37 SEARCH DATA SETTING – Write only 
SE 
 SEnn       (nn: 01 – 40 )  Bank number 
SLnnnnnnnnnn (Lower Frequency) 
SUnnnnnnnnnn (Upper Frequency) 
AUn  
STnnnnnn,  MDn,  BWn,  ENn,  ATn,  AMn,...

 75 
SR      Read search data of the current search bank 
SRnn   (nn: 01 – 40)   
Search data in search bank 1 - 40 
SRn    (n: 1 -  10) 4 
            Search data in search bank 1- 10 
SR%    Search data in all search bank 
SR 
 
  SRn SLnnnnnnnnnn Sunnnnnnnnnn AUn MDn BWn ATn AMn TTxxxxxxxx         
SRn --- (Blank) 
 
7-3-39 PASS FREQUENCY – Write only 
PW      Register a current freq. to Pass freq. 
PW 
  
PWnnnnnnnnnnnn    Register the freq. to Pass freq. 
 
7-3-40 PASS FREQUENCY LIST – Read only...

 76 
 QS%%  
Delete all search data and pass frequencies on all search 
banks 
 
7-3-43 TRANSFER THE CURRENT SEARCH DATA TO VFO – Write only 
SVn      (n: 0 – 9)     
SV 
 
 
 
 n: 0        VFO – A 
n: 1        VFO – B 
:           : 
n:9     VFO – J (Default) 
  
7-3-44 MEMORY DATA SETTING – Write only 
MX -------- Write the current receiver data to the current bank and channel   
  
MX 
 
 
 MXmnn -- Write the current receiver data to the designated bank and 
channel 
(m: 0 – 9)    Bank number 
(nn: 00...

 77 
n: 0      OFF GA 
 
 n: 1      ON 
To read: GA 
Response:   GAn 
 
7-3-47 SELECT MEMORY LIST – Read only 
GRnn          (nn: 00 – 99)    Memory channel on the designated bank 
GR%%    All channels  (100channels maximum) 
GRn              (n: 0 – 9 )        List of 10 channels data 
GR 
 
 
 
GR        Next 10 channels data 
[Example]:  GRnn mxx … nn   (nn: channel number)   
                             (m: memory bank) 
                             (xx: memory channel) 
 
7-3-48 DELETE MEMORY –...

 78 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
8 SPECIFICATIONS 
Model:                  AR-ONE 
Configuration:           Triple conversion super heterodyne 
Frequency coverage:          10 KHz ~ 3.3 GHz (no gap) 
Receive mode:           AM, NFM, WFM, USB, LSB, CW, DATA 
Sensitivity:               (AM mode – 10 dB S/N,  NFM mode – 12 dB SINAD,  
CW/SSB mode – 10 dB S/N)  

 79 
   10 ~ 40 KHz:          CW 22.3 uV 
      40 ~ 100 KHz:                  AM – 4.5 uV, CW – 1.5 uV 
      100 KHz ~ 40 MHz:        AM 2.5 uV, 2 ~ 40 MHz: AM – 1.5 uV, 
                        SSB/CW – 0.7 uV, NFM – 0.89 uV 
      40 MHz ~ 1 GHz:          AM – 0.89 uV, SSB/CW – 0.4 uV, NFM – 0.5 uV, WMF – 1.5 uV 
      1GHz ~ 2.5 GHz:          AM – 0.7 uV, SSB/CW – 0.32 uV, NFM – 0.4 uV, WFM – 1.5 uV 
      2.5 GHz ~ 3.3 GHz:      AM – 0.9 uV, SSB/CW – 0.35 uV, NFM – 0.5 uV, WFM – 1.5 uV 
IF...