AOR AR One Ultra Wide Band Reciever Instructions Manual
Here you can view all the pages of manual AOR AR One Ultra Wide Band Reciever Instructions Manual. The AOR manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 2
1 Table of contents 1 Introduction --------------------------------------------------------------- 4 1-1 Introduction ---------------------------------------------------------------- 4 1-2 Take care of your radio ---------------------------------------------------------------- 5 1-3 Attention while operating --------------------------------------------------------------- 6 1-4 Accessories supplied...
Page 3
2 2-4-1-1 Entering frequency using the numeric keypad ---------------------------- 16 2-4-1-2 Changing frequency using the main tuning dial --------------------------- 16 2-4-1-3 Changing frequency using UP arrow key or DOWN arrow key --------- 17 2-5 Changing receive mode -------------------------------------------------------------- 17 2-5-1 Auto mode selection ------------------------------------------------------------- 19 2-5-2...
Page 4
3 32 4-3 Selecting a SCAN bank -------------------------------------------------------------- 32 4-4 Select SCAN ------------------------------------------------------------- 32 4-4-1 Adding select scan channels in memory read ------------------------------------ 32 4-4-2 Starting/Stopping select scan --------------------------------------------------------- 33 5 Search mode...
Page 5
4 6-6 Configure IF-GAIN (Intermediate Frequency gain) ---------------------------------- 49 6-7 Configure RF-GAIN (Radio Frequency gain) ------------------------------------------ 50 6-8 Configure Remote BPS (Baud Rate) --------------------------------------------------- 50 6-9 Configure RMT-ID (Remote ID) ----------------------------------------------------------- 51 6-10 Configure DELAY (Scan delay and Search delay) --------------------------------- 52...
Page 6
5 62 8 Specifications ------------------------------------------------------ 75 9 Optional Accessories ----------------------------------------------------- 76 10 Limited Warranty ------------------------------------------------------ 77 1 Introduction 1-1 Introduction Thank you for purchasing the AR-ONE Ultra Wide Band Communications receiver. The AR-ONE is designed using the very latest...
Page 7
6 all of the manual before deciding to contact your dealer for advice. It is acknowledged that sections of this manual are repetitive, this is to enable the manual to be used as a reference book (you don’t have to read it all from cover to cover in one go). Due to the international nature of the product, some graphics contain Japanese characters. Every effort has been made to make this manual correct and up to date. Due to continuous development of the receiver. and by error or omission...
Page 8
7 1-2 Take care of your radio There are no internal operator adjustments. In the unlikely event of servicing being required, please contact your dealer for technical assistance. Do not use or leave the receiver in direct sunlight (especially the LCD). It is best to avoid locations where excessive heat, humidity, dust and vibration are expected. Always keep the AR-ONE free from dust and moisture. Use a soft, dry cloth to gently wipe the set clean, never use abrasive cleaners or...
Page 9
8 unipole, Yagi, etc. When sighting the antenna, avoid power cables. Ensure that you do not confuse the antenna and other IF output connectors as they are closely located. Operating anomalies Should the AR-ONE appear to behave strangely, normal operation may be easily achieved by resetting the microprocessor. Two scenarios may be encountered due to power transients etc: 1. Symptom: LCD remains on, no control of the keypad. Action: Remove any connection to external power and leave...
Page 10
9 If you have not used a wide band receiver before or not familiar with the terminology used, it is very important to understand the difference between SEARCH and SCAN modes. SEARCH: The AR-ONE provides several operations where transmissions (active frequencies) may be automatically located by sweeping the receiver over a wide frequency range, either from the currently displayed frequency traveling upwards (or downwards) in a specified tuning increment (step) or by sweeping over-and-over...