Acer Aspire 1810t Service Guide

Chapter 371
Removing the Mainboard
1.See “Removing the Upper Cover” on page 58.
2.See “Removing the LCD Module” on page 64.
3.See “Removing the LED Board” on page 66.
4.See “Removing the Bluetooth Module” on page 68.
5.See “Removing the I/O Board” on page 69.
6.Disconnect the speaker cable from the mainboard.
7.Remove the five screws of the main board and the CRT board.
Screw List
StepScrewQuantityScrew Type.
Main Board 
Disassembly2*3 5 

72Chapter 3
8.Lift the main board and the CRT board out together. Lift the internal edge up first then pull out the external 
connector edge. 

Chapter 373
Removing the CRT Board
1.See “Removing the Mainboard” on page 71.
2.Disconnect the CRT cable from the CRT board.
3.Disconnect the CRT cable from the main board. 

74Chapter 3
Removing the Thermal Module
1.See “Removing the Mainboard” on page 71.
2.See “Removing the CRT Board” on page 73.
3.Remove the five captive screws of the thermal module.
4.Lift the thermal module up slightly and then disconnect the thermal module cable from the main board.
5.Lift the thermal module away from the main board. 

Chapter 375
Removing the RTC Battery
IMPORTANT:Observe local regulations in the disposal of all batteries.
1.See “Removing the Mainboard” on page 71.
2.Pry the RTC battery out of the holding clips. 

76Chapter 3
Removing the Speaker Modules
1.See “Removing the Mainboard” on page 71.
2.Remove the four screws from the speaker modules.
Screw List
3.Remove the black foam piece.
StepScrewQuantityScrew Type
Speaker Module 
DisassemblyM2*3 4 

Chapter 377
4.Pull the cables away from the two adhesive locations.
5.Lift the modules away. 

78Chapter 3
 LCD Module Disassembly Process
IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and 
replacement of components, ensure all available cable channels and clips are used and that the cables are 
replaced in the same position.
NOTE: The product previews seen in the disassembly procedures may not represent the final product color or 
configuration.
LCD Module Disassembly Flowchart
Screw List
StepScrewQuantityPart No.
Remove LCD 
Bezel2*5 6...

Chapter 379
Removing the LCD Bezel
1.See “Removing the LCD Module” on page 64.
2.Remove the six rubber screw covers.
3.Remove the six screws securing the bezel.
Screw List
StepScrewQuantityScrew Type
LCD Bezel 
Disassembly2x5 6 

80Chapter 3
4.Pull the bezel away from the top and then work down one side, along the bottom, then up the other side.