Acer Aspire 1810t Service Guide
Here you can view all the pages of manual Acer Aspire 1810t Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 121
Chapter 3111 Replacing the LED Board 1.Connect the LED board FCC to the mainboard. 2.Place the LED board into place ensuring the slide switches on the front are properly aligned in the lower cover slots. 3.Replace the one screw.
Page 122
11 2Chapter 3 Screw List 4.Connect the LED board FCC to LED board. StepScrewQuantityScrew Type LED Board Assembly M2*3 1
Page 123
Chapter 311 3 Replacing the LCD Module 1.Place the LCD module hinges into position on the lower case. 2.Replace the two screws. Screw List StepScrewQuantityScrew Type LCD Module Assembly M2x5 2
Page 124
11 4Chapter 3 3.Reconnect the LCD module connector. 4.Press the adhesive plastic tape of the LCD module connector down firmly. 5.Relay the WLAN and 3M module cables around and through the lower case.
Page 125
Chapter 311 5 Replacing the Button Board 1.Apply adhesive and stick the touch pad FCC down onto the upper cover. 2.Connect the touch pad FCC to the touch pad. 3.Place the button board onto the upper cover and replace the two screws.
Page 126
11 6Chapter 3 Screw List 4.Connect the touch pad FCC to the button board. 5.Bring the button board FCC through the upper cover. StepScrewQuantityScrew Type Button Board AssemblyM2-0.4*2 2
Page 127
Chapter 311 7 6.Lay the button board FCC down carefully on the upper cover. 7.Connect the button board FCC to the button board.
Page 128
11 8Chapter 3 Replacing the Upper Cover 1.Place the upper cover onto the lower cover aligning the hinges first and then press down around the edges. 2.Replace the twelve screws.
Page 129
Chapter 311 9 Screw List 3.Turn the computer over, put on the bottom cover and lay out the WLAN card and 3M module cables around and through the bottom cover. StepSizeQuantityScrew Type Upper Cover AssemblyM2*2.5 3 (blue call out) M2*3 3 (green call out) M2*5 6 (red call out)
Page 130
120Chapter 3 4.Place adhesive tape over the 3M module cables. 5.Replace the bottom cover twelve screws. Screw List 6.Turn the computer back over and connect the button board FCC to the main board. StepSizeQuantityScrew Type Upper Cover AssemblyM2*5 12