Acer Aspire 1810t Service Guide
Here you can view all the pages of manual Acer Aspire 1810t Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
Chapter 361 Removing the Button Board IMPORTANT: The Touchpad Board cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. 1.See “Removing the Upper Cover” on page 58. 2.Unlock and remove the touch-pad to mainboard FCC. 3.Unlock and detach the touch-pad to touch-pad FCC.
Page 72
62Chapter 3 4.Remove the two screws holding the button board. Screw List 5.Lift the button board away 6.Peel the touch-pad FCC away from the adhesive. StepSizeQuantityScrew Type Button board M2-0.4*2 2
Page 73
Chapter 363 7.Unlock the touch-pad FCC and pull the cable away.
Page 74
64Chapter 3 Removing the LCD Module 1.See “Removing the Upper Cover” on page 58. 2.Pull the 3M module and WLAN cables away from the computer. 3.Lift the transparent adhesive tape off the LCD connector.
Page 75
Chapter 365 4.Push out the LCD connector. 5.Remove the two screws of the LCD module hinges. Screw List 6.Lift the LCD module away. StepScrewQuantityScrew Type LCD Module DisassemblyM2*5 2
Page 76
66Chapter 3 Removing the LED Board 1.See “Removing the Upper Cover” on page 58. 2.Unlock and remove the LCD board FCC. 3.Remove the single screw securing the LED Board to the Lower Cover. Screw List StepScrewQuantityScrew Type LED Board Disassembly2*3 1
Page 77
Chapter 367 4.Lift off the LCD Board. 5.Unlock and remove the LED board FCC from the mainboard.
Page 78
68Chapter 3 Removing the Bluetooth Module 1.See “Removing the Upper Cover” on page 58. 2.Detach the Bluetooth module cable from the mainboard. 3.LIft the Bluetooth module away from the computer. 4.Detach the Bluetooth module cable from the module.
Page 79
Chapter 369 Removing the I/O Board 1.See “Removing the Upper Cover” on page 58.. 2.Unlock and remove the I/O board FCC from the main board 3.Unlock and remove the I/O board FCC from the I/O board. 4.Remove the two screws from the I/O board.
Page 80
70Chapter 3 Screw List 5.Lift the board up from the internal edge and then pull away diagonally. StepScrewQuantityScrew Type. I/O Board Disassembly M2*3 2