Acer Aspire 1810t Service Guide
Here you can view all the pages of manual Acer Aspire 1810t Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 61
Chapter 351 5.Pull the memory module out. 6.Repeat steps 4. and 5. for the second memory module.
Page 62
52Chapter 3 Removing the WLAN Module 1.See “Removing the Battery Pack” on page 45.. 2.Loosen the four captive screws in the memory cover. 3.Lift and remove the memory cover. 4.Detach the two cables from the Wireless LAN module. IMPORTANT:Take note of the Main (1. black) and Auxiliary (2. white) connectors.
Page 63
Chapter 353 5.Remove the one screw. Ensure the cables are well clear of the module Screw List 6.Pull the WLAN module out and away. StepScrewQuantityScrew Type WAN Module Disassembly2*3 1
Page 64
54Chapter 3 Main Unit Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration. Main Unit Disassembly Flowchart Remove External Modules bef ore proceeding Remove Mainboard Remove LCD...
Page 65
Chapter 355 Screw List StepScrewQuantityPart No. Remove Upper Cover M2*2.5 3 86.SA107.002 M2*3 3 86.SA107.001 M2*5 18 86.TG607.004 Remove Button Board M2-0.4*2 2 86.W4107.002 Remove LCD Module 2*5 2 86.TG607.004 Remove LED Board M2*3 1 86.SA107.001 Remove I/O Board M2*3 2 86.SA107.001 Remove Mainboard M2*3 5 86.SA107.001 Remove Speaker ModuleM2*3 4 86.SA107.001
Page 66
56Chapter 3 Removing the Keyboard IMPORTANT: The keyboard is easily warped or damaged during the removal process. Take care not to use excessive force when removing to prevent damage. 1.See “Removing the Battery Pack” on page 45. 2.See “Removing the Hard Disk Drive Module” on page 47. 3.See “Removing the DIMM Module” on page 50. 4.See “Removing the WLAN Module” on page 52. 5.Using the plastic pry, press in the four latches along the top of the keyboard to release the keyboard from the cover. NOTE: The...
Page 67
Chapter 357 6.Using the plastic pry, lift up the top edge of the keyboard and then lift the keyboard up. 7.Flip the keyboard over. a.Unlock the FCCb.Pull the keyboard away a b
Page 68
58Chapter 3 Removing the Upper Cover 1.See “Removing the Keyboard” on page 56. 2.Disconnect the button board FCC from the main board by unlocking the FCC cable and pulling away. 3.Remove the twelve screws in the upper cover. Screw List StepSizeQuantityScrew Type Upper Cover DisassemblyM2*2.5 3 (blue call out) M2*3 3 (green call out) M2*5 6 (red call out)
Page 69
Chapter 359 4.Turn the computer over and remove the twelve screws in the bottom cover. Screw List 5.Pull off the tape from the 3M module cables. StepSizeQuantityScrew Type Upper Cover DisassemblyM2*5 12
Page 70
60Chapter 3 6.Pull the 3M module and WLAN cables away from the computer. NOTE: Replace the plastic caps over the 3M module cable connectors immediately if they get dislodged during the process. 7.Turn the computer over and grasp the upper cover by the hinges. Then pull the upper cover up and away from the computer.