Acer Aspire 1810t Service Guide
Here you can view all the pages of manual Acer Aspire 1810t Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
Chapter 121 Keyboard Media Card Reader Camera Features • The AR8131L is the third generation Gigabit Ethernet (GbE) controller solution from Atheros. It is an ultra-high performance, ultralow cost, and ultra-low power fully integrated 10/100/1000 Mbps NIC/LOM Ethernet controller perfectly suited for both PC and embedded applications. • The AR8131L combines a 10/100/1000BASE-T GbE media access controller (MAC), a triplespeed Ethernet physical layer transceiver (PHY), and a PCI Express bus...
Page 32
22Chapter 1 Wireless LAN BatteryDimensions (L x W x H mm)65 x 8 x 3.84 +/- 0.25 (H) mm65X 7.9X 3.8+/-0.2mm 64.8±0.3 X 7.9±0.1 X 3.64+0.15/-0.25 mm Sensor type CMOS (OV9710) CMOS image sensor CMOS Pixel resolution 640x480 640X480 640 x 480 Pixel size TBD 3.6um X3.6um TBD Image size TBD 2.36mm(H) X1.76mm(V)TBD ItemSpecificationSpecificationSpecificationSpecification Type Atheros HB93 1x2 BGNIntel MM#903341 Intel MM#897072 Intel MM#895373 802.11g Radio Technology IEEE 802.11g standard compliant...
Page 33
Chapter 123 Pack capacity SANYO 6 cell 4400mAh SANYO 6 cell 5600mAh PANASONIC 6 cell 4400mAh PANASONIC 6 cell 5800mAh SAMSUNG 6 cell 4400mAh SAMSUNG 6 cell 5600mAh LGC 6 cell 5600mAh Number of battery cell 6 Package configuration 3 cells in series, 2 series in parallel ItemSpecification 6 Cell
Page 34
24Chapter 1
Page 35
Chapter 225 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when a problem arises. To activate the BIOS Utility, press F2 during POST (when Press to enter Setup message is...
Page 36
26Chapter 2 Information The Information screen displays a summary of your computer hardware information. NOTE: The system information is subject to variance across different models. ParameterDescription CPU Type This field shows the CPU type and speed of the system. CPU Speed This field shows the speed of the CPU. HDD Model Name This field shows the model name of HDD installed on primary IDE master. HDD Serial Number This field displays the serial number of HDD installed on primary IDE master. ATAPI...
Page 37
Chapter 227 Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. ParameterDescriptionFormat/Option System Time Sets the system time. The hours are displayed with 24- hour format.Format: HH:MM:SS (hour:minute:second) System Date...
Page 38
28Chapter 2 Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don’t forget the password. If you forget the password, you may have to reset the computer. Setting a Password Follow these steps as you set the user or...
Page 39
Chapter 229 1.Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: 2.Type a password in the “Enter New Password” field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the “Confirm New Password” field. IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen. 3.Press Enter. After setting the...
Page 40
30Chapter 2 Changing a Password 1.Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. 2.Type the current password in the Enter Current Password field and press Enter. 3.Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. 4.Press Enter. After setting the password, the computer sets the User Password parameter to “Set”. 5.If desired, you can enable the Password on boot...