Acer Aspire 1810t Service Guide
Have a look at the manual Acer Aspire 1810t Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 371 Removing the Mainboard 1.See “Removing the Upper Cover” on page 58. 2.See “Removing the LCD Module” on page 64. 3.See “Removing the LED Board” on page 66. 4.See “Removing the Bluetooth Module” on page 68. 5.See “Removing the I/O Board” on page 69. 6.Disconnect the speaker cable from the mainboard. 7.Remove the five screws of the main board and the CRT board. Screw List StepScrewQuantityScrew Type. Main Board Disassembly2*3 5
72Chapter 3 8.Lift the main board and the CRT board out together. Lift the internal edge up first then pull out the external connector edge.
Chapter 373 Removing the CRT Board 1.See “Removing the Mainboard” on page 71. 2.Disconnect the CRT cable from the CRT board. 3.Disconnect the CRT cable from the main board.
74Chapter 3 Removing the Thermal Module 1.See “Removing the Mainboard” on page 71. 2.See “Removing the CRT Board” on page 73. 3.Remove the five captive screws of the thermal module. 4.Lift the thermal module up slightly and then disconnect the thermal module cable from the main board. 5.Lift the thermal module away from the main board.
Chapter 375 Removing the RTC Battery IMPORTANT:Observe local regulations in the disposal of all batteries. 1.See “Removing the Mainboard” on page 71. 2.Pry the RTC battery out of the holding clips.
76Chapter 3 Removing the Speaker Modules 1.See “Removing the Mainboard” on page 71. 2.Remove the four screws from the speaker modules. Screw List 3.Remove the black foam piece. StepScrewQuantityScrew Type Speaker Module DisassemblyM2*3 4
Chapter 377 4.Pull the cables away from the two adhesive locations. 5.Lift the modules away.
78Chapter 3 LCD Module Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product previews seen in the disassembly procedures may not represent the final product color or configuration. LCD Module Disassembly Flowchart Screw List StepScrewQuantityPart No. Remove LCD Bezel2*5 6 86.TG607.004 Remove LCD Brackets2*2.5 4 86.SA107.002 Remove LCD Panel2*3 2 86.SA107.001 Remove LCD Brackets Remove Camera Module Remove LCD FPC Cable Remove LCD Panel f rom Main Unit bef ore proceeding Remove LCD Panel Remove Antennas Detach Microphone Remove LCD Bracket Bezel
Chapter 379 Removing the LCD Bezel 1.See “Removing the LCD Module” on page 64. 2.Remove the six rubber screw covers. 3.Remove the six screws securing the bezel. Screw List StepScrewQuantityScrew Type LCD Bezel Disassembly2x5 6
80Chapter 3 4.Pull the bezel away from the top and then work down one side, along the bottom, then up the other side.