ZyXEL Router Prestige 334 User Manual

Prestige 334 User’s Guide
Chapter 29 System Information and Diagnosis 280
29.3.1.3  Filter log 
29.3.1.4  PPP log 
Filter log Message Format
SdcmdSyslogSend(SYSLOG_FILLOG, SYSLOG_NOTICE, String );
String = IP[Src=xx.xx.xx.xx Dst=xx.xx.xx.xx prot spo=xxxx dpo=xxxx] S04>R01mD
IP[…] is the packet header and S04>R01mD means filter set 4 (S) and rule 1 (R), match 
(m) drop (D).
Src: Source Address
Dst: Destination Address
prot: Protocol (“TCP”,”UDP”,”ICMP”)
spo: Source port
dpo: Destination port
Mar 03...

Prestige 334 User’s Guide
281 Chapter 29 System Information and Diagnosis
29.3.1.5  Firewall log
29.3.2  Call-Triggering Packet
Call-Triggering Packet displays information about the packet that triggered a dial-out call in 
an easy readable format. Equivalent information is available in menu 24.1 in hex format. An 
example is shown next.
Firewall Log Message Format
SdcmdSyslogSend(SYSLOG_FIREWALL, SYSLOG_NOTICE, buf);
buf = IP[Src=xx.xx.xx.xx : spo=xxxx Dst=xx.xx.xx.xx : dpo=xxxx | prot | rule | action]...

Prestige 334 User’s Guide
Chapter 29 System Information and Diagnosis 282
Figure 155   Call-Triggering Packet Example
29.4  Diagnostic
The diagnostic facility allows you to test the different aspects of your Prestige to determine if 
it is working properly. Menu 24.4 allows you to choose among various types of diagnostic 
tests to evaluate your system, as shown in the following figure.
Follow the procedure next to get to Diagnostic:
1From the main menu, type 24 to open Menu 24 – System Maintenance.
2From...

Prestige 334 User’s Guide
283 Chapter 29 System Information and Diagnosis
Figure 156   Menu 24.4 System Maintenance : Diagnostic
29.4.1  WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in LAN & WAN DHCP. 
LAN DHCP has already been discussed. The Prestige can act either as a WAN DHCP client 
(IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation 
field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN 
Release and Renewal...

Prestige 334 User’s Guide
Chapter 29 System Information and Diagnosis 284
WAN DHCP RenewalEnter 3 to renew your WAN DHCP settings.
Internet Setup TestEnter 4 to test the Internet setup. You can also test the Internet setup in 
Menu 4 - Internet Access. Please refer to the Internet Access chapter for 
more details. This feature is only available for dial-up connections using 
PPPoE or PPTP encapsulation.
Reboot SystemEnter 11 to reboot the Prestige.
Host IP Address= If you entered 1 in Ping Host, then...

Prestige 334 User’s Guide
285 Chapter 29 System Information and Diagnosis 

Prestige 334 User’s Guide
Chapter 30 Firmware and Configuration File Maintenance 286
CHAPTER30
Firmware and Configuration File
Maintenance
This chapter tells you how to backup and restore your configuration file as well as upload new 
firmware and configuration files.
30.1  Filename Conventions
The configuration file (often called the romfile or rom-0) contains the factory default settings 
in the menus such as password, DHCP Setup, TCP/IP Setup, etc. It arrives from ZyXEL with a 
“rom” filename...

Prestige 334 User’s Guide
287 Chapter 30 Firmware and Configuration File Maintenance
The following table is a summary. Please note that the internal filename refers to the filename 
on the Prestige and the external filename refers to the filename not
 on the Prestige, that is, on 
your computer, local network or FTP site and so the name (but not the extension) may vary. 
After uploading new firmware, see the ZyNOS F/W Version field in Menu 24.2.1 – System 
Maintenance – Information to confirm that you...

Prestige 334 User’s Guide
Chapter 30 Firmware and Configuration File Maintenance 288
Figure 158   Telnet in Menu 24.5
30.2.2  Using the FTP Command from the Command Line
1Launch the FTP client on your computer.
2Enter “open”, followed by a space and the IP address of your Prestige.  
3Press [ENTER] when prompted for a username.
4Enter your password as requested (the default is “1234”).
5Enter “bin” to set transfer mode to binary.
6Use “get” to transfer files from the Prestige to the computer, for...

Prestige 334 User’s Guide
289 Chapter 30 Firmware and Configuration File Maintenance
30.2.3  Example of FTP Commands from the Command Line 
Figure 159   FTP Session Example
30.2.4  GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP 
clients.
30.2.5  TFTP and FTP over WAN Management Limitations
TFTP, FTP and Telnet over WAN will not work when:
• You have disabled Telnet service in menu 24.11.
• You have applied a filter in menu 3.1 (LAN) or in menu...