ZyXEL Router Prestige 334 User Manual

Prestige 334 User’s Guide
Chapter 33 Call Scheduling310
CHAPTER33
Call Scheduling
Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate 
when a remote node should be called and for how long.
33.1  Introduction to Call Scheduling
The call scheduling feature allows the Prestige to manage a remote node and dictate when a 
remote node should be called and for how long. This feature is similar to the scheduler in a 
videocassette recorder (you can specify a time period for...

Prestige 334 User’s Guide
311Chapter 33 Call Scheduling
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a 
remote node.
 To setup a schedule set, select the schedule set you want to setup from menu 26 (1-12) and 
press [ENTER] to see Menu 26.1 — Schedule Set Setup as shown next.  
Figure 174    Menu 26.1 Schedule Set Setup
If a connection has been already established, your Prestige will not drop it. Once the 
connection is dropped manually or it times out, then...

Prestige 334 User’s Guide
Chapter 33 Call Scheduling312
Once your schedule sets are configured, you must then apply them to the desired remote 
node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using 
[SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press 
[ENTER] to make the schedule sets field available as shown next.
Figure 175   Applying Schedule Set(s) to a Remote Node (PPPoE)
You can apply up to four schedule sets, separated by commas, for one...

Prestige 334 User’s Guide
313Chapter 33 Call Scheduling 

Prestige 334 User’s Guide
Chapter 34 VPN/IPSec Setup314
CHAPTER34
VPN/IPSec Setup
This chapter introduces the VPN SMT menus. 
34.1  VPN/IPSec Overview
The VPN/IPSec main SMT menu has these main submenus:
1Define VPN policies in menu 27.1 submenus, including security policies, endpoint IP 
addresses, peer IPSec router IP address and key management. 
2Menu 27.2 - SA Monitor allows you to manage (refresh or disconnect) your SA 
connections. 
This is an overview of the VPN menu tree.
Figure 176   VPN SMT...

Prestige 334 User’s Guide
315Chapter 34 VPN/IPSec Setup
Figure 177   Menu 27 VPN/IPSec Setup
34.2  IPSec Summary Screen
Type 1 in menu 27 and then press [ENTER] to display Menu 27.1 IPSec Summary. This is a 
summary read-only menu of your IPSec rules (tunnels). Edit or create an IPSec rule by 
selecting an index number and then configuring the associated submenus.
Figure 178   Menu 27
Menu 27 - VPN/IPSec Setup
 1. IPSec Summary
 2. SA Monitor
Enter Menu Selection Number:
Menu 27.1 – IPSec Summary
#
-...

Prestige 334 User’s Guide
Chapter 34 VPN/IPSec Setup316
Local Addr 
StartWhen the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single, this is a 
static IP address on the LAN behind your Prestige.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range, this is 
the beginning (static) IP address, in a range of computers on the LAN behind your Pres-
tige. 
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET, this 
is a static IP address on the LAN...

Prestige 334 User’s Guide
317Chapter 34 VPN/IPSec Setup
Remote Addr 
EndWhen the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single, this is 
the same (static) IP address as in the Remote Addr Start field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range, this is 
the end (static) IP address, in a range of computers on the network behind the remote 
IPSec router. 
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET, this 
is a subnet mask...

Prestige 334 User’s Guide
Chapter 34 VPN/IPSec Setup318
Figure 179   Menu 27.1.1 IPSec Setup
The following table describes the fields in this menu.
                        Menu 27.1.1 – IPSec Setup
Index= 1         Name= Taiwan
Active= Yes      Keep Alive= No      Nat Traversal= No    
Local ID type            Content=
My IP Addr= 0.0.0.0
Peer ID type= IP         Content=
Secure Gateway Address= zw50test.zyxel.com.tw
Protocol= 0              DNS Server= 0.0.0.0
Local:
Remote:
   Addr Type= SINGLE
Local...

Prestige 334 User’s Guide
319Chapter 34 VPN/IPSec Setup
ContentWhen you select IP in the Local ID Type field, type the IP address of your computer or 
leave the field blank to have the Prestige automatically use its own IP address.
When you select DNS in the Local ID Type field, type a domain name (up to 31 char-
acters) by which to identify this Prestige. 
When you select E-mail in the Local ID Type field, type an e-mail address (up to 31 
characters) by which to identify this Prestige. 
The domain name...