ZyXEL Router Prestige 334 User Manual

Prestige 334 User’s Guide
Chapter 23 Remote Node Configuration 230
23.4  Remote Node Filter
Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to 
set the value to Ye s. Press [ENTER] to open Menu 11.5 - Remote Node Filter. 
Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between 
this remote node and the Prestige to prevent certain packets from triggering calls. You can 
specify up to 4 filter sets separated by commas, for...

Prestige 334 User’s Guide
231 Chapter 23 Remote Node Configuration
Figure 106   Menu 11.5: Remote Node Filter (Ethernet Encapsulation)
Figure 107   Menu 11.5: Remote Node Filter (PPPoE or PPTP Encapsulation)
23.4.1  Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the 
backup gateway using Menu 11.6 — Traffic Redirect Setup. 
Menu 11.5 - Remote Node Filter
       Input Filter Sets:
       protocol filters=
        device filters=
       Output...

Prestige 334 User’s Guide
Chapter 23 Remote Node Configuration 232
Figure 108    Menu 11.6: Traffic Redirect Setup
The following table describes the fields in this screen.
         
                     Menu 11.6 - Traffic Redirect Setup
               Active= Yes
               Configuration:
                 Backup Gateway IP Address= 0.0.0.0
                 Metric= 15
                 Check WAN IP Address= 0.0.0.0
                   Fail Tolerance= 2
                   Period(sec)= 5...

Prestige 334 User’s Guide
233 Chapter 23 Remote Node Configuration 

Prestige 334 User’s Guide
Chapter 24 Static Route Setup 234
CHAPTER24
Static Route Setup
This chapter shows how to setup IP static routes.
24.1  IP Static Route Setup
To configure an IP static route, use Menu 12 – Static Routing Setup (shown next).
Figure 109   Menu 12 IP Static Route Setup 
Now, type the route number of a static route you want to configure.
 Menu 12 - IP Static Route Setup
        1. ________
        2. ________
        3. ________
        4. ________
        5. ________
        6....

Prestige 334 User’s Guide
235 Chapter 24 Static Route Setup
Figure 110   Menu12.1 Edit IP Static Route
The following table describes the fields for Menu 12.1 – Edit IP Static Route Setup.
Menu 12.1 - Edit IP Static Route
         Route #: 1
         Route Name= ?
         Active= No
         Destination IP Address= ?
         IP Subnet Mask= ?
         Gateway IP Address= ?
         Metric= 2
         Private= No
Press ENTER to Confirm or ESC to Cancel:
Table 79   Menu12.1 Edit IP Static Route...

Prestige 334 User’s Guide
Chapter 25 Network Address Translation (NAT) 236
CHAPTER25
Network Address Translation
(NAT)
This chapter discusses how to configure NAT on the Prestige.
25.1  Using NAT
25.1.1  SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that supports two 
types of mapping, Many-to-One and Server. See section Address Mapping Sets for a 
detailed description of the NAT set for SUA. The Prestige also supports Full Feature NAT to 
map...

Prestige 334 User’s Guide
237 Chapter 25 Network Address Translation (NAT)
Figure 111   Menu 4 Applying NAT for Internet Access
The following figure shows how you apply NAT to the remote node in menu 11.1. 
1Enter 11 from the main menu.
2When menu 11 appears, as shown in the following figure, type the number of the remote 
node that you want to configure.
3Move the cursor to the Edit IP field, press [SPACE BAR] to select Ye s and then press 
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer...

Prestige 334 User’s Guide
Chapter 25 Network Address Translation (NAT) 238
Figure 112   Menu 11.3 Applying NAT to the Remote Node
The following table describes the options for Network Address Translation.
25.3  NAT Setup
Use the address mapping sets menus and submenus to create the mapping table used to assign 
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full 
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT 
will use the...

Prestige 334 User’s Guide
239 Chapter 25 Network Address Translation (NAT)
Figure 113   Menu 15 NAT Setup
25.3.1  Address Mapping Sets 
Enter 1 to bring up Menu 15.1 — Address Mapping Sets.
Figure 114   Menu 15.1 Address Mapping Sets
Enter 255 to display the next screen (see  the SUA (Single User Account) Versus NAT section ). 
The fields in this menu cannot be changed.
Menu 15 - NAT Setup
           1. Address Mapping Sets
           2. Port Forwarding Setup
           3. Trigger Port Setup
Enter Menu...