ZyXEL Router Prestige 334 User Manual

Prestige 334 User’s Guide
Chapter 18 Introducing the SMT 200
CHAPTER18
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and gives 
an overview of its menus.
18.1  SMT Introduction
The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can 
access from a terminal emulator through the console port or over a telnet connection. This 
chapter shows you how to access the SMT (System Management Terminal) menus via console 
port, how...

Prestige 334 User’s Guide
201 Chapter 18 Introducing the SMT
Figure 87   Login Screen
18.1.3  Prestige SMT Menu Overview
The following figure gives you an overview of the various SMT menu screens of your 
Prestige.
Figure 88   SMT Menu Overview
18.2  Navigating the SMT Interface
The SMT(System Management Terminal) is the interface that you use to configure your 
Prestige. 
Enter Password : **** 

Prestige 334 User’s Guide
Chapter 18 Introducing the SMT 202
Several operations that you should be familiar with before you attempt to modify the 
configuration are listed in the table below.
After you enter the password, the SMT displays the main menu, as shown next.
Table 63   Main Menu Commands
OPERATIONKEYSTROKEDESCRIPTION
Move down to 
another menu[ENTER]To move forward to a submenu, type in the number of the 
desired submenu and press [ENTER].
Move up to a 
previous menu[ESC]Press [ESC] to move...

Prestige 334 User’s Guide
203 Chapter 18 Introducing the SMT
Figure 89   SMT Main Menu
18.2.1  System Management Terminal Interface Summary
The following table describes the fields in the previous screen.
              Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
                             Prestige 334 Main Menu
    Getting Started                      Advanced Management
      1. General Setup                     21. Filter and Firewall Setup
      2. WAN Setup                         22. SNMP...

Prestige 334 User’s Guide
Chapter 18 Introducing the SMT 204
18.3  Changing the System Password
Change the Prestige default password by following the steps shown next. 
1Enter 23.1 in the main menu to display Menu 23.1 - System Security - Change 
Password.
2Type your existing system password in the Old Password field, for example “1234”, and 
press [ENTER]
Figure 90   Menu 23 System Password
3Type your new system password in the New Password field (up to 30 characters), and 
press [ENTER].
4Re-type your...

Prestige 334 User’s Guide
205 Chapter 18 Introducing the SMT 

Prestige 334 User’s Guide
Chapter 19 Menu 1 General Setup 206
CHAPTER19
Menu 1 General Setup
Menu 1 - General Setup contains administrative and system-related information.
19.1  General Setup
Menu 1 — General Setup contains administrative and system-related information (shown 
next). The System Name field is for identification purposes. However, because some ISPs 
check this name you should enter your computers  Computer Name. 
In Windows 95/98 click Sta rt, Settings, Control Panel, Network. Click the...

Prestige 334 User’s Guide
207 Chapter 19 Menu 1 General Setup
Figure 91   Menu 1 General Setup.
2Fill in the required fields. Refer to the table shown next for more information about these 
fields.
Menu 1 - General Setup
         System Name=
         Domain Name= zyxel.com.tw
         First System DNS Server= From ISP
           IP Address= N/A
         Second System DNS Server= From ISP
           IP Address= N/A
         Third System DNS Server= From ISP
           IP Address= N/A
         Edit...

Prestige 334 User’s Guide
Chapter 19 Menu 1 General Setup 208
19.2.1  Procedure to Configure Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and select Ye s in the Edit 
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as 
shown next.
Figure 92   Menu 1.1 Configure Dynamic DNS 
Follow the instructions in the next table to configure Dynamic DNS parameters.
Note: If you have a private WAN IP address, then you cannot 
use Dynamic DNS
Menu 1.1 - Configure Dynamic...

Prestige 334 User’s Guide
209 Chapter 19 Menu 1 General Setup
OfflineThis field is only available when CustomDNS is selected in the DDNS Type field. 
Press [SPACE BAR] and then [ENTER] to select Ye s. When Ye s is selected, 
http://www.dyndns.org/ traffic is redirected to a URL that you have previously specified 
(see www.dyndns.org
 for details). 
Edit Update IP Address: 
You can select Ye s in either the Use Server Detected IP field (recommended) or the User Specified 
IP Addr field, but not both.
With...