Zanussi Zra 226 Cwo User Manual

							11
3R]QiPN\NRFKUDQ
åLYRWQtKRSURVW
HGt
6\PEROQDYêURENXQHERMHKRREDOXXGiYiåH
VWtPWRYêURENHPQHO]H]DFKi]HWMDNRVGRPRYQtP
RGSDGHP-HQXWQpMHMRGYp]WGRVE
UQpKRPtVWD


SRP
$åHWH]DEUiQLWS
tSDGQêPQHJDWLYQtPGRSDG
$PQD


LQIRUPDFHRUHF\NODFLWRKRWRVSRW
HELþH]tVNiWH
QDPtVWQtPREHFQtP~
DGXVW
HGLVNXSUROLNYLGDFL
GRPiFtKRRGSDGXQHERYREFKRG
NGHMVWHWHQWR
VSRW
HELþ]DNRXSLOL2EDORYpPDWHULiO\
0DWHULiO\R]QDþHQpV\PEROHP MVRXUHF\NORYDWHOQp

NUHF\NODFL
/LNYLGDFHVSRW
HELþH
9\WiKQ
WH]iVWU
						

							12
Contents
Safety information __ __ __ __ __ __ __ __ __ _ 12
Control panel _ __ __ __ __ __ __ __ __ __ __ _ 14
First use __ __ __ __ __ __ __ __ __ __ __ __ _ 14
Daily use  _ __ __ __ __ __ __ __ __ __ __ __ _ 15
Helpful hints and tips __ __ __ __ __ __ __ __ _ 16Care and cleaning __ __ __ __ __ __ __ __ __ _ 16
What to do if… __ __ __ __ __ __ __ __ __ __ _ 17
Technical data __ __ __ __ __ __ __ __ __ __ _ 18
Installation __ __ __ __ __ __ __ __ __ __ __ _ 18
Environmental concerns _ __ __ __ __ __ __ __ _ 21
 Safety information
In the interest of your safety and to ensure the correct 
use, before installing and first using the appliance, 
read this user manual carefully, including its hints 
and warnings. To avoid unnecessary mistakes and 
accidents, it is important to ensure that all people using 
the appliance are thoroughly familiar with its operation 
and safety features. Save these instructions and make 
sure that they remain with the appliance if it is moved or 
sold, so that everyone using it throughout its life will be 
properly informed on appliance use and safety.
For the safety of life and property follow the precautions 
in these user instructions as the manufacturer is not 
responsible for damages caused by omission.
Children’s and vulnerable people’s safety
This appliance is not intended for use by persons  UÊ
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a 
person responsible for their safety. Children should 
be supervised to ensure that they do not play with the 
appliance.
Keep all packaging well away from children. There is  UÊ
risk of suffocation.
If you are discarding the appliance pull the plug out  UÊ
of the socket, cut the connection cable (as close to 
the appliance as you can) and remove the door to 
prevent children suffering electric shock or shutting 
themselves in it.
If this appliance featuring magnetic door seals is  UÊ
to replace an older appliance having a spring lock 
(latch) on the door or lid, ensure that the spring lock 
unusable before you discard the old appliance. This 
will prevent it from becoming a death trap for a child.
General safety
Caution!Keep ventilation openings clear of 
obstruction.
The appliance is intended for keeping foodstuffs and/ UÊ
or beverages in a normal household as explained in 
this instruction booklet.
Do not use a mechanical device or any artificial  UÊ
means to speed up the thawing process.
Do not use other electrical appliances (such as  UÊ
ice cream makers) inside refrigerating appliances, 
unless they are approved for this purpose by the 
manufacturer.
Do not damage the refrigerant circuit.  UÊ
The refrigerant isobutane (R600a) is contained within  UÊ
the refrigerant circuit of the appliance, a natural gas 
with a high level of environmental compatibility, 
which is nevertheless flammable.
During transportation and installation of the appliance, 
be certain that none of the components of the refrigerant 
circuit become damaged.
avoid open flames and sources of ignition –
thoroughly ventilate the room in which the  –
appliance is situated
It is dangerous to alter the specifications or modify  UÊ
this product in any way. Any damage to the cord may 
cause a short-circuit, fire and/or electric shock.
Subject to change without notice.
 
						

							13
Warning!Any electrical component (power cord, 
plug, compressor) must be replaced by a certified 
service agent or qualified service personnel.
Power cord must not be lengthened. 1.
Make sure that the power plug is not squashed or  2.
damaged by the back of the appliance. A squashed 
or damaged power plug may overheat and cause 
a fire.
Make sure that you have access to the mains plug  3.
of the appliance.
Do not pull the mains cable. 4.
If the power plug socket is loose, do not insert the  5.
power plug. There is a risk of electric shock or fire.
You must not operate the appliance without the  6.
cover on the interior light
This appliance is heavy. Care should be taken when  UÊ
moving it. 
Avoid prolonged exposure of the appliance to direct  UÊ
sunlight.
Daily use
Do not put hot objects on the plastic parts in the  UÊ
appliance.
Do not store flammable gas and liquid in the  UÊ
appliance, because they may explode.
Appliance manufacturer’s storage recommendations  UÊ
should be strictly adhered to. Refer to relevant 
instructions.
Care and cleaning
Before maintenance, switch off the appliance and  UÊ
disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects. UÊ
Regularly examine the drain in the refrigerator for  UÊ
defrosted water. If necessary, clean the drain. If the 
drain is blocked, water will collect in the bottom of 
the appliance.
Installation
Important! For electrical connection carefully follow the 
instructions given in specific paragraphs.
Unpack the appliance and check if it is damaged.  UÊ
Do not connect the appliance if it is damaged. Report possible damages immediately to the place you 
bought it. In that case retain packing.
It is advisable to wait at least four hours before  UÊ
connecting the appliance to allow the oil to flow back 
in the compressor.
Ensure adequate air circulation around the appliance,  UÊ
otherwise it may overheat. To achieve sufficient 
ventilation follow the instructions relevant to 
installation.
Wherever possible the back of the product should be  UÊ
against a wall to avoid touching or catching warm 
parts (compressor, condenser) to prevent possible 
burn.
The appliance must not be located close to radiators  UÊ
or cookers.
Make sure that the mains plug is accessible after the  UÊ
installation of the appliance.
Service
Any electrical work required for servicing of the  UÊ
appliance should be carried out by a qualified 
electrician or competent person.
This product must be serviced by an authorized  UÊ
Service Centre, and only genuine spare parts must 
be used.
Environmental Protection
This appliance does not contain gases which 
could damage the ozone layer, in either its 
refrigerant circuit or insulation materials. The appliance 
should not be disposed of with urban refuse and 
rubbish. The insulation foam contains flammable gases: 
the appliance should be disposed of according to the 
appliance regulations obtainable from your local 
authority. Avoid damaging the cooling unit, especially 
at the rear near the heat exchanger. The materials used 
on this appliance marked by the symbol 
  are 
recyclable.
 
						

							14
Control panel
First use
Control panel
1 Control panel
Temperature regulation knob
The knob is located on the right side of the 
compartment and used to regulate internal temperature.
Number “0” – Off UÊ
Lowest number – least cold internal temperature UÊ
Highest number – coldest internal temperature UÊ
12
1 Lamp
2 Temperature regulation knob
Internal light
It will be turned on when the door is opened and be 
turned off when the door is closed.
Cleaning the interior
Before using the appliance for the first time, wash the 
interior and all internal accessories with lukewarm water 
and some neutral soap so as to remove the typical smell 
of a brand new product, then dry thoroughly.Important!Do not use detergents or abrasive 
powders, as these will damage the finish.
1
 
						

							15
Daily use
Movable shelves
There are 17 positions in the compartment for the 
location of the movable shelves. All shelves are able to 
be moved to suitable positions.
1
1 Safety glass shelves
Positioning the door shelves
In order to store food or beverage with different sizes, 
the door shelves can be placed at different heights. 
Follow below process to adjust the shelves.
Step 1. Pull the shelf free.
Step 2. Select suitable position and press the shelf to 
two convex plates until it is totally fixed.
Vegetable Drawer
The drawer is suitable for storing fruit and vegetables. It 
can be pulled out freely.
1
1 Vegetable drawer
Thawing
Deep-frozen or frozen food, prior to use, can be thawed in 
the compartment or at room temperature. Place the frozen 
food in a dish or bowl to avoid melt water damage.
 
						

							16
Helpful hints and tips
Care and cleaning
Hints for fresh food refrigeration
To obtain the best performance:
Do not store warm food or evaporating liquids in the  UÊ
refrigerator
Do cover or wrap the food, particularly if it has a  UÊ
strong flavour 
Position food so that air can circulate freely around it UÊ
Hints for refrigeration
Useful hints:
Meat (all types): wrap in polythene bags and place on 
the glass shelf above the vegetable drawer.
For safety, store in this way only one or two days at the 
most.Cooked foods, cold dishes, etc.: these should be 
covered and may be placed on any shelf. Fruit and 
vegetables: these should be thoroughly cleaned and 
placed in the vegetable drawer.
Butter and cheese: these should be placed in special 
airtight containers or wrapped in aluminium foil or 
polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be 
stored in the bottle rack on the door. Bananas, potatoes, 
onions and garlic, if not packed, must not be kept in the 
refrigerator.
Cleaning
For hygiene reasons the appliance interior, including 
interior accessories, should be cleaned regularly.
Caution!The appliance must not be connected to 
the mains during cleaning. Danger of electrical 
shock! Before cleaning switch the appliance off and 
remove the plug from the mains, or switch off or turn 
out the circuit breaker or fuse. Never clean the appliance 
with a steam cleaner. Moisture could accumulate in 
electrical components, danger of electrical shock! Hot 
vapours can lead to damage of plastic parts. The 
appliance must be dry before it is placed back into 
service.
Important! Ethereal oils and organic solvents can 
attack plastic parts, e.g. lemon juice or the juice from 
orange peel, butyric acid, cleansers that contain acetic 
acid.
Do not allow such substances to come into contact  UÊ
with appliance parts.
Do not use any abrasive cleaners. UÊ
Remove foodstuffs from the compartment. Store  UÊ
them in a cool place, well covered.Switch the appliance off and remove the plug from  UÊ
the socket or switch off or turn out the circuit breaker 
or fuse.
Clean the appliance and the interior accessories with  UÊ
a cloth and lukewarm water. After cleaning wipe with 
fresh water and rub dry.
Accumulation of dust at the condenser increases  UÊ
energy consumption. For this reason carefully clean 
the condenser at the back of the appliance once a 
year with a soft brush or a vacuum cleaner.
Clear the blocked drain hose with the aid of  UÊ
something like soft green peg, be careful not to 
damage the cabinet with sharp objects.
After everything is dry place appliance back into  UÊ
service.
 
						

							17
What to do if…
Caution!Before troubleshooting, disconnect the 
power supply.
Only a qualified electrician or competent person must 
do the troubleshooting that is not in this manual.Important!There are some sounds during normal use 
(compressor, refrigerant circulation).
If the malfunction shows again, contact the Service 
Centre.
These data are necessary to help you quickly and 
correctly. Write the necessary data here, refer to the 
rating plate.Model description .........................................................
(Mod.)
Product number ............................................................
(PNC)
Serial number................................................................
(S.N.)
Problem Possible cause Solution
Appliance does not workTemperature regulation knob is set 
at number “0”.Set the knob at another number to 
switch on the appliance.
Mains plug is not plugged in or is 
loose.Insert mains plug.
Fuse has blown or is defective. Check fuse, replace if necessary.
Socket is defective. Mains malfunctions are to be 
corrected by an electrician.
The food is too warmTemperature is not properly 
adjusted.Please look in the initial Control 
Panel section.
Door was open for an extended 
period.Open the door only as long as 
necessary.
A large quantity of warm food was 
placed in the appliance within the 
last 24 hours.Turn the temperature regulation 
knob to a colder setting temporarily.
The appliance is near a heat source. Please look in the installation 
location section.
Appliance cools too muchTemperature is set too cold. Turn the temperature regulation 
knob to a warmer setting 
temporarily.
Unusual noisesAppliance is not level. Re-adjust the feet.
The appliance is touching the wall 
or other objects.Move the appliance slightly.
A component, e.g. a pipe, on the 
rear of the appliance is touching 
another part of the appliance or 
the wall.If necessary, carefully bend the 
component out of the way.
Water on the floor Water drain hole is blocked. See the Cleaning and Care section.
 
						

							Installation
Important
In order to reserve the required space around the 
refrigerator for ventilation, please keep 100mm 
distance between 2 sides and top of the wine 
refrigerator and the wall and 50mm distance 
betweenrear of refrigerator and the wall.
100
100100
50
 
						

							20Unscrew and remove the bottom hinge pin, and  4.
replace in another hole.
Interchange two brackets and fit them. Replace both  5.
adjustable feet.
Unscrew and remove the top hinge pin, turn the top  6.
hinge over and replace the pin.
 
Transfer the door to the proper position. Ensure the  7.
door is level; insert the bottom hinge pin into the 
lower hole of the door and the top hinge pin into 
upper hole of the door. Then tighten the top hinge 
with three ”ange screws.
 
Move the front small plate from left to right. 8.
 
Replace the top cover. 9.
Before replacing the door, please alter the position of 
the handle and hinge hole cover. 
Use a ”at bladed screwdriver to remove the 2 screw 1.
covers at the side of the handle. Then unscrew the 
handle and “t it to the other side of the door.
Move the hinge hole cover to the other side. 2.