Yamaha Rx5 Manual

26
TEMPO CHANGE FUNCTION
FUNCTIONTo enter gradual tempo changes into a selected Song.This function allows you to enter a gradual change of tempo in a Song. The tempo can
increase (accelerando) or decrease (ritardando). You can set the overall range of the
Tempo Change, and the duration of the change.
A Tempo Change counts as a Part of a Song.
l If you enter a Tempo Change during a repeat section, the Tempo Change will also
be repeated, allowing you to make a gradual Tempo Change over a long period...

3. Press “1” to select Up (volume increase) or “2” to select Down (volume decrease).
As the operation is identical for both types of Volume Change, we’ll describe volume
increase only. The only difference is that the Volume Change value is shown as a
positive number for volume increase, and a negative number for volume decrease.
4. Use the Numeric Key Pad to set the value of the Volume Change. Range: 0—31.
l If more than one Volume Change command is entered into a Song, the resulting
volume depends on...

28
OPERATION1. Press PATTERN/SONG until the LCD indicates Song Mode, and use the Numeric
Key Pad to select the Song you wish to clear, then press CLEAR.
You can now cancel the Song Clear operation, if you wish, by pressing -1/NO. The
LCD will return to the Song select display.
l If the Memory Protect is ON, the LCD will show “MEMORY PROTECTED” when the
Clear function is selected, indicating that Song Clear cannot be carried out. Use
UTILITY JOB #03 to turn off the Memory Protect function.
2. To clear the...

SEARCH PART 

30 

31 

32 

33You can now cancel the Chain Clear operation, if you wish, by pressing -1/NO.
l If the Memory Protect is ON, the LCD will show “MEMORY PROTECTED” when the
Clear function is selected, indicating that Chain Clear cannot be carried out. Use
UTILITY JOB #03 to turn off the Memory Protect function.
3. To clear the Chain, press +1/YES.
If you wish, you can now cancel the Clear operation by pressing -1/NO. To carry out
the Clear operation, press +1/YES, to see:
Followed byThe LCD will now show that the...

34 

35
JOB #02: PITCH EDIT
FUNCTIONTo alter the pitch of the selected voice.This function can be carried out on the voice that has been selected using EDIT VOICE
JOB #01.
OPERATION1. After selecting a voice in JOB #01, select JOB #02.
2. Use the -1/NO and +1/YES keys or the DATA ENTRY slider to change the pitch
by semitone units. Holding the “0” key while using the -1/NO or +1/YES key to
change pitch allows pitch change in 10-cent (1/10th semitone) units. Pitch values are
shown in 1-cent (1/100th semitone)...