Yamaha Rx5 Manual

66
OPERATION1. Press MIDI and select Job #09.
2. EITHER: Press +1/YES to send a Bulk Dump Request to the external device. OR:
Set the transmitting device to transmit bulk data (if it is a second RX5, use JOB #10).
lIf the RX5 Memory Protect is on, the LCD will show “Memory Protected” and prevent
Bulk Dump. Use UTILITY JOB #03 to turn off the Memory Protect function.
During Bulk Dump the RX5’s LCD will show
After transmission the LCD will show
NOTE: When the RX5 receives Bulk Data, all of the Data...

67
The RX5’s LCD will display an error message if:
l You have made an operating mistake (for example, tried to enter wrongdata).l Memory limits have been reached.lYou need to know about malfunctions or operational information concerningthe RX5 or external MIDI devices or cassettes or cartridges.For example, trying to record a Pattern in realtime when the RX5’s Internal Memory
Protect is ON, will produce the following LCD message.
NOTE: All LCD messages that indicate an error will be illustrated with the...

68 

69
CARTRIDGE MODE ERROR MESSAGES
MESSAGECartrg not ready
Cartrg other typ
Cartrg protected
Format conflict!
no data !
Verify error!CAUSEYou have entered the Cartridge Mode, but you have not
inserted a RAM4 Cartridge into the RX5
You have entered the Cartridge Mode, but the RX5’s
Sequence Data Cartridge slot contains the wrong type
of cartridge (for example, a Waveform Data Cartridge).
You have tried to save data, or execute the Format oper-
ation, with the Memory Protect turned ON on your RAM4...

70
SOUND  SOURCE• INTERNAL: 12 BIT, 24 VOICES
• RAM: 12 BIT, 12 VOICES
• 
WAVEFORM DATA CARTRIDGE: 28 VOICES
MEMORY CAPACITY• 100 PATTERNS (MAX. LENGTH: 99 MEASURES)
• 20 SONGS (MAX. LENGTH: 999 PARTS)
• 3 CHAINS (MAX. LENGTH: 999 STEPS)
• 3 SETS OF KEY DATA
CONTROLLERS• SLIDERS: MASTER VOLUME, CLICK VOLUME, TEMPO, DATA ENTRY, INSTRUMENTVOLUME (12)
• 
BUTTONS: ACCENT 1, ACCENT 2, STOP/CONTINUE/SHIFT, START/ENTER,INSTRUMENTS A THRU X (24)
•
KEYS: PATTERN &SONG OPERATION KEYS (PATTERN/SONG, REAL TIME...

71This gives a simple visual representation of how voice data is transferred and edited in
the RX5 All Jobs are Edit Voice Mode Jobs.
The RX5’s voice editing process, from stared voice to actual sound, is described
as follows:
1.A voice is selected, using EDIT VOICE JOB #01. This voice belongs to one of three
types: Internal, Copied, or Cartridge.
2.“Primary data” is entered, using EDIT VOICE JOBS #2 thru #6. The Edit Voice Block
Diagram shows how voice data is transferred and edited. “Primary data”...

Function
 ... 
Transmitted 
Recognized

Remarks

Basic Default

Channel Changed 
1-16

1-16 
1-16

1-16 
memorized

Mode 
Default

Messages

Altered 
3

x

************** 
3

x

x

Note

Number : True voice 
0
 -
 127

************** 
0-127/36-96

x 
*1

Velocity Note ON

Note OFF 
o 9nH,v=1-127

x 8nH,v=64 
o v=1-127

x

After Keys

Touch Chs 
x

x 
x

x

Pitch Bender 
x

x

x
x

Control

Change

Prog

Change : True # 
x

************** 
o 
Note# asgn:pitch

System Exclusive

o

o 
voice & sequence...

RX5 PATTERN CHART 

RX5 SONG/CHAIN CHART 

RX5 DRUM SET CHART