Yamaha Rx5 Manual

16
PATTERN COPY/APPEND
FUNCTIONTo copy a Pattern to another destination, or append a Patternto another Pattern.The Pattern Copy function lets you copy any selected Pattern to another destination in
the RX5’s Pattern memory. This is useful if you want to copy a Pattern in order to alter
it to create a new Pattern, while retaining the original Pattern. It is also useful if you want
to have the Patterns in a particular order in the RX5s memory (so that, for example, you
can easily play one Pattern followed...

17 

18 

19NOTE: Long attacks create “looping”. Refer to EDIT VOICE JOB #03 for comments
about this.
3.As soon as you change this parameter value, it will start flashing on the LCD. Press
START to enter the new value. The parameter value will then stop flashing.
4. You can now select another parameter for editing, or exit the Pattern edit Mode by
pressing STOP/CONTINUE. The LCD will return to the Select pattern display.
PARAMETER 4: DECAY1. To select Decay, press “4”
2. Use the -1/NO and +1/YES keys or the DATA...

20 

21 

224. Press +1/YES to move to the next Part, and enter another Pattern number in the
same way.
5.Continue moving through the Song, entering Pattern numbers as desired. It’s a good
idea to keep a written record of a Song, as you edit it. Refer to the SONG/CHAIN
CHART at the end of this manual.
You can move backwards through a Song using the -1/NO key. This lets you go
back to check a Part. Any lime a Part is displayed, you can change the Pattern
contained in that Part by entering a new Pattern number....

DELETE FUNCTlON3. Press QUANTIZE/DELETE
FUNCTIONTo delete parts from a Song.The Delete Function works in the opposite way to the Insert Function. It lets you remove
any Part from a Song that has already been assembled. For example, if you want to
remove the Pattern that we inserted in our Song in the previous section, you would locate
Part 3 and carry out the Delete Function.
You can now press -1/NO if you wish to cancel the Delete operation. The LCD will
return to the previous display.
l You can also...

24You can also copy to a destination BEFORE the end of the Song, provided it comes
AFTER the Parts which which are to be copied. Be careful! If you do this, ALL Parts
following the selected destination will be cleared (erased). This example shows what
happens if we copy Parts 2 and 3 to Part 4.
OPERATION1. Press PATTERN/SONG until the LCD indicates Song Mode, and use the Numeric
Key Pad to select a song. Then press REAL TIME WRITE/EDIT SONG lo enter the
Edit Song Mode.
2. Use the +1/YES key to locate the...

REPEATS