Yamaha Promix 1 Manual

 
Cursor Buttons 
13 
ProMix 01 User’s Guide 
Cursor Buttons 
The cursor buttons are used to select parameters and options on the 
LCD. The selected parameter or option appears highlighted. 
The [ 
à 
] and [ 
¨ 
] cursor buttons move the cursor left and right, and 
the [ 
¹ 
] and [ 
  
] cursor buttons move the cursor up and down. 
Cursor buttons are also used to position the cursor in a name when 
naming mix scenes, user effects programs, user EQ programs, and 
user dynamics programs. They are also...

 
14 
Chapter 2: User Interface 
ProMix 01 User’s Guide 
SEL Buttons 
The [SEL] buttons are used in conjunction with the LCD functions. 
To perform an action on a channel, first select it using a [SEL] button, 
then choose a function using the function buttons to the left of the 
LCD. This form of editing is similar to computer word processing. 
First, you select your text, then execute a function. 
The input channel, stereo input channel, and stereo output [SEL] 
buttons select their respective channels....

 
LCD Functions 
15 
ProMix 01 User’s Guide 
LCD Functions 
ProMix 01 functions without dedicated controls are organized into 
LCD functions. They are selected using the function buttons to the 
left of the LCD. The name of the selected LCD function appears in 
the FUNCTION area of the display. 
The following table lists all LCD functions and explains what they do.  
LCD Function Description
UTILITY  
Lists the utility functions: OSCILLATOR, SEND3, 4 CONFIGU-
RATION, OUTPUT COMP PATCH POINT, MEMORY...

 
16 
Chapter 2: User Interface 
ProMix 01 User’s Guide 

 
Mixer Functions 
17 
ProMix 01 User’s Guide 
3 
Mixer Functions 
In this chapter... 
Phantom Power   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   18
Pad  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   18
Gain  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   18
Metering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   19
Phase  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 
18 
Chapter 3: Mixer Functions 
ProMix 01 User’s Guide 
Phantom Power 
Phantom power provides a +48V DC power source for condenser 
type microphones. It is applied to XLR input channels 1 through 8. 
The PHANTOM MASTER switch on the rear panel is used to turn it 
ON and OFF. Phantom power is applied simultaneously to all eight 
inputs. It cannot be set for individual inputs.
With phantom power set to ON, non-phantom powered micro-
phones, dynamic microphones, and balanced line-level sources can 
still...

 
Metering 
19 
ProMix 01 User’s Guide 
1. Press [METER]. 
The METER LCD function 
appears. 
2. To turn the Peak Hold func-
tion ON and OFF, press 
[ENTER] or use the PARAM-
ETER wheel.
3. Use the [ 
à 
] [ 
¨ 
] cursor but-
tons or press [ENTER] to 
switch between the two 
METER displays. 
Metering 
ProMix  01 features comprehensive signal level metering. Input chan-
nels, the stereo input channel, RTN1, RTN2, SEND3, and SEND4 are 
all metered using the METER LCD function. The stereo output is 
metered...

 
20 
Chapter 3: Mixer Functions 
ProMix 01 User’s Guide 
1. Select a channel using the 
[SEL] buttons.
2. Press [PAN/ 
Æ 
]. 
The PHASE LCD function 
appears. If the PAN display 
appears, press  
[PAN/ 
Æ 
] 
 
again. 
3. To change the phase, press 
[ENTER] or use the PARAM-
ETER wheel. 
Other channels can be 
selected using the  
[SEL] 
 but-
tons or cursor buttons.  
Phase 
The Phase function reverses the polarity of the hot and cold feeds in 
a balanced input (i.e. pins 2 and 3). The phase can be set...

 
EQ 
21 
ProMix 01 User’s Guide 
1. Select a channel using the 
[SEL] buttons.
2. Press [EQ LOW], [MID], or 
[HIGH]. 
The EQ LCD function appears. 
3. Press [EQ LOW], [MID], or 
[HIGH] repeatedly to select 
the parameters for each 
band. 
You can also use the cursor 
buttons to select parameters. 
4. To turn the EQ ON or OFF, 
press [ENTER] or select the 
ON/OFF parameter and use 
the PARAMETER wheel. 
EQ 
ProMix 01 EQ is three-band fully parametric, with variable Q, fre-
quency, gain, and ON/OFF...

 
22 
Chapter 3: Mixer Functions 
ProMix 01 User’s Guide 
EQ Library 
The EQ library is used to store EQ settings. Settings are stored as EQ 
programs, and there are 30 preset programs (1–30) and 20 user pro-
grams (31–50) for you to store your own EQ settings. When STORE 
is selected on the LIBRARY LCD function, user program 31, the first 
user program, is selected automatically. You cannot select preset pro-
grams 1 through 30 while the STORE option is selected. User EQ pro-
grams can be named for easy...