Yamaha Promix 1 Manual

 
EQ Presets 
23 
ProMix 01 User’s Guide 
EQ Presets 
Program # Program Name DescriptionParameter
Low Mid High 
1 RESETReset the EQ (G = 0dB, F and Q = their 
initial values...same as mix scene 00).G 0dB 0dB 0dB
F 80Hz 2.0kHz 10kHz
Q SHELF 3/2oct SHELF
2 LOUDNESSSame as loudness function on a hi-fi 
amp. Improves listening at low vol-
ume levels.G +5dB +3dB 0dB
F 80Hz 200Hz 10kHz
Q SHELF 2oct SHELF
3 EQ DISCOLow and high boost for disco and 
dance.G +5dB -4dB +4dB
F 90Hz 700Hz 12kHz
Q 3oct 1/6oct 3oct
4...

 
24 
Chapter 3: Mixer Functions 
ProMix 01 User’s Guide 
16 WOOD BASSWooden bass EQ with low range em-
phasis.G +2dB +1dB +2dB
F 80Hz 315Hz 2.2kHz
Q 3oct 3/2oct SHELF
17 ACOUSTIC GUITARAcoustic guitar EQ with high range 
emphasis.G +2dB +3dB +4dB
F 180hz 4.0kHz 7.0kHz
Q 2oct 2oct SHELF
18 TRUMPET EQ for sustaining trumpet.G +1dB +1dB +4dB
F 360Hz 1.4kHz 5.6kHz
Q 3oct 1oct 2oct
19 SAXOPHONE EQ for sustaining saxophone.G +3dB +1dB +3dB
F 315Hz 900Hz 3.6kHz
Q 2oct 1/4oct SHELF
20 PIANO EQ for a natural...

 
Faders 
25 
ProMix 01 User’s Guide 
Faders 
ProMix 01 faders are motorized, which means that they can position 
themselves automatically. So all faders in a group or stereo pair move 
automatically when you move any fader in that group or stereo pair. 
Fader positions are stored in mix scenes, so when a mix scene is 
recalled the faders move automatically to their new positions. Fader 
positions are stored when ProMix  01 is powered OFF. So even if faders 
have been moved, they return automatically to...

26Chapter 3: Mixer Functions
ProMix 01 User’s Guide
Pan and Balance
The PAN LCD function is used to pan and balance signals. Input 
channels, the stereo input channel, RTN1, and RTN2 can be panned, 
and the stereo output can be balanced. 
The PAN LCD function consists of two displays. One shows the 16 
input channel pans. The other, the stereo input (ST IN), RTN1, and 
RTN2 pans, and stereo output balance (ST OUT). Pressing a channel 
[SEL] button selects the corresponding display and pan control auto-...

Stereo-Pair Pans27
ProMix 01 User’s Guide
Stereo-Pair Pans
When input channels are paired, their pan controls appear as one 
dual-concentric control (i.e. one control inside the other), as shown 
below. Horizontal bars, at the bottom of the display, show the pan 
positions and values of the selected channel pair. When channels are 
paired using ST RESET, the odd channel is automatically panned 
hard-left and the even channel, hard-right. See “Pairing Channels” on 
page 58.
GANG and INDIVIDUAL modes...

28Chapter 3: Mixer Functions
ProMix 01 User’s Guide 

Auxiliaries and Effects29
ProMix 01 User’s Guide
4
Auxiliaries and Effects
In this chapter... 
About Auxiliaries  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   30
About Effects   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   30
Preset Effects Programs  . . . . . . . . . . . . . . . . . . . . . . . .   30
Stereo Input Channel and Sends   . . . . . . . . . . . . . . . .   31
Applying Effects  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   31
Sending a...

30Chapter 4: Auxiliaries and Effects
ProMix 01 User’s Guide
About Auxiliaries
ProMix 01 has four auxiliary sends: SEND1, SEND2, SEND3, and 
SEND4. And two auxiliary returns: RTN1 and RTN2. Auxiliary sends 
can be configured pre-fader or post-fader. SEND1 and SEND2 are 
used to feed the internal effects processors: Effect1 and Effect2. RTN1 
and RTN2 are used to return the processed signals.
SEND3 and SEND4 can be used to feed external effects processors, 
foldback amplifiers, or multitrack recording...

Stereo Input Channel and Sends31
ProMix 01 User’s Guide
Stereo Input Channel and Sends
Input channels 1 through 16 handle only a single signal. The stereo 
input channel, however, handles two signals: left and right. So before 
feeding the stereo input signal to the SEND1, SEND2, SEND3, and 
SEND4 send level controls, the left and right signals are summed to 
form a mono L+R mix. 
When SEND3 and SEND4 are used as a stereo pair, however, only the 
stereo input signals feeding SEND1 and SEND2 are summed....

32Chapter 4: Auxiliaries and Effects
ProMix 01 User’s Guide
1. Press [SEND1] or [SEND2].
The SEND1 or SEND2 LCD 
function appears. If you didn’t 
exit after your last effect edit, 
the EFFECT EDIT LCD function 
appears instead.
The channel faders are now 
controlling channel-to-send 
levels and the RTN/SEND 
fader, the corresponding 
return (RTN1 or RTN2).
2. Raise the channel fader.
0dB is a good fader position 
to start with. You can always 
readjust later.
For post-fader sends you must 
set the normal...