Yamaha Cl 5 User Guide

Input channels
 Reference Manual
41
NOTEIf you are viewing the 8 ch INPUT DELAY screen, you can use the Bank Select keys in the 
Centralogic section to switch the channel s being controlled in groups of eight.
INPUT DELAY screen (8ch)You can set the on/off status and the value of the input channel delay.1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit 
for the delay time.
There are five delay scales: meter (meter/s ec), feet (feet/sec), sample...

Input channels
 Reference Manual
42
INPUT DELAY (CH 1-48, CH  49-72/ST IN (CL5), 
CH 49-64/ST IN (CL3 ), ST IN (CL1))1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit 
for the delay time.
2
Channel select buttonLights to indicate the curren tly-selected input channel. Pr ess the button to select the 
channel.
3
Delay setting knob (input channels only)
Press this knob to adjust the value using  the multifunction knob. You can view the 
current value...

Input channels
 Reference Manual
43
 LR-MONOThe signals sent to both channels are temporarily set as mono signals.Setting procedureIf a stereo input channel is selected, the SELECTED CHANNEL VIEW screen will appear as 
shown below.
1
LR-MONO SELECT field
Select one of the four buttons. The button you select lights up, and the others go off.
If a stereo input chan nel is selected, the OVERVIEW screen will appear as shown below.
2
LR-MONO SELECT button
This a toggle button. The setting switch es each...

Input channels
 Reference Manual
44
Surround output for input channelsSetting Surround modeYou can enable surround mixes by changing bus settings to Surround mode. NOTE
When you switch from Stereo mode to Surround mode, the signals for MIX1/2, 3/4, and 5/6 
change to MONO x2.
However, when you switch from Surround mode to Stereo mode, the signals for MIX1/2, 3/4, and 
5/6 remain as MONO x2.
SELECTED CHANNEL VIEW screenIf you set a bus to Surround mode in BUS SETUP, the SELECTED CHANNEL VIEW screen...

Input channels
 Reference Manual
45
4
DIV knob
This determines how the Center signal is fe d to the Left, Right, and Center channels. 
When set to 0, the Center signal is fed only  to the Left and Right channels. When set to 
50, the Center signal is fed equally to the Left, Right, and Center channels. When set to 
100, it’s fed to only the Center channel (i.e., Real Center).
Use the SEND knob (MIX 5) of the Selected Channel section to make adjustments.
5
LFE knob
This sets the level of the LFE (Low...

Input channels
 Reference Manual
46
SURROUND PAN 1CH screenIf you set a bus to Surround mode in BUS SETUP, the SURROUND PAN 1CH screen appears 
as shown below. This screen is displayed when you press the pan display area in the 
SELECTED CHANNEL VIEW screen  or the OVERVIEW screen.1
Surround graph
This graph shows the surround positions.
2
Surround position
You can set the surround position by touching and dragging the ball in the graph.
3
Assign buttons for each bus
All of these buttons are turned on by...

Input channels
 Reference Manual
47
1
Surround graph
This graph shows the surround positions.
2
L/R F/R switch button
Use this toggle button to switch between the screen for adjusting L/R and the screen for 
adjusting F/R.
Use the SEND knob (MIX 5) of the Selected Channel section to make adjustments.
TO STEREO/MONO screenIf you set a bus to Surround mode in BUS SETUP, the TO STEREO/MONO 8CH screen for 
MIX 1-8 appears as shown below. MIX 1-6 are for setting downmixes.1
L/R buttons
Use these buttons to...

Input channels
 Reference Manual
48
The TO STEREO/MONO OUTPUT screen appears as shown below. Parameters cannot be 
set for MIX 1 - 6; this screen is only for displaying parameters.Channel library operationsThe “INPUT CHANNEL LIBRARY” enables you to store and recall various parameters 
(including the head amp settings) for input channels.
To recall a library item, press the corresponding LIBRARY button in the SELECTED 
CHANNEL VIEW screen. For details on using the library, refer to the “Using libraries”...

OUTPUT channels
 Reference Manual
49
OUTPUT channelsThis chapter explains output channels (MIX channels, MATRIX channels, STEREO channels, 
MONO channels).Signal flow for output channelsThe output channel section takes the signals sent from the input channels to the various 
buses, processes them with EQ and dynamics, and sends them to output ports or other 
buses. The following types of output channels are provided.MIX channelsThese channels process signals sent from input channels to MIX buses, and...

OUTPUT channels
 Reference Manual
50
• MATRIX ON/OFF (MATRIX send on/off)
This is an on/off switch for signals sent from the MIX channels, STEREO (L/R) channel, 
or MONO (C) channel to each MATRIX bus.
• M ATR I X ( M AT RI X  se n d l e ve l )
This adjusts the send level of the signal sent from the MIX channels, STEREO (L/R) 
channel, or MONO (C) channel to each MATRIX bus 1 - 8. For the position from which 
the signal will be sent to the MATRIX bus, you can choose either immediately before the 
fader,...