Xerox Synergix 510dp User Manual

XEROX WIDE FORM AT 510dp OPERATOR MANUAL1
1. Printer overview
This chapter shows the orientation of the printer.  It also illustrates
and describes its main components, as well as the elements of the
control panel.
Printer orientation
The illustration below shows the printer orientation.  You must be
familiar with this orientation when following the messages in the
message display and the instructions in this guide.
1.
Left side
2.
Back
3.
Right side
4.
Front
3
1
2
4
Downloaded From ManualsPrinter.com...

PRINTER OVERVIEW
2XEROX Wide Format 510dp OPERATOR MANUAL
Main components
1. Output tray
Prints exit the printer face up onto this tray.  This tray holds up to
100 prints of all sizes (including mixed sizes).  The tray can be
raised for access to the cut sheet feed-in shelf and the media
supply drawers.
2. Drawer 1
Open to load paper rolls and to clear media jams in drawer 1.
3. Drawer 2*
Open to load paper rolls and to clear media jams in drawer 2.
4. Drawer 3*
Open to load paper rolls and to clear...

PRINTER OVERVIEW
XEROX WIDE FORM AT 510dp OPERATOR MANUAL3
1. Cutter drawer
Open to clear media jams in the cutter area.
WARNING: The cutter blade is very sharp.  Do not touch the
cutter blade when clearing media jams in the cutter area.
2. Printer on/off switch (white)
Press to switch the printer on or off.
3. Power cord connection
Connect the power cord here and to a suitable power outlet.
4. Circuit breaker switch (black)
Press to turn power to the Printer on or off.
5. Toner supply access cover
Open...

PRINTER OVERVIEW
4XEROX Wide Format 510dp OPERATOR MANUAL
Control panel
The control panel is located on top of the front side of the printer.
It consists of a graphic display, a message display, several
function keys, and a numeric keypad.
1. Graphic display
This is an illustration of the printer with indicator lights for the front
door, the cutter drawer, the toner supply access cover, the cut
sheet feed-in shelf, drawer 1, drawer 2, and drawer 3.  The
indicator lights have three states.  Off is the...

PRINTER OVERVIEW
XEROX WIDE FORM AT 510dp OPERATOR MANUAL5
8. On-line/Off-line key
Press this key to switch between the on-line and off-line modes.  In
on-line mode, the indicator light to the left of the key is lit. In off-line
mode, the indicator light is not lit.
When in on-line mode, the printer accepts and processes print
requests.  When in off-line mode, the printer holds print requests in
the print queue.  The requests remain in the print queue until either
the printer returns to on-line mode or...

PRINTER OVERVIEW
6XEROX Wide Format 510dp OPERATOR MANUAL
This page has been intentionally left blank.
Downloaded From ManualsPrinter.com Manuals 

XEROX WIDE FORM AT 510dp OPERATOR MANUAL7
2. Powering on and off
This chapter describes the procedures for powering on and
powering off.  It also describes the power consumption modes.
Powering on
To power on:
1.  Switch the circuit breaker to the On (I) position.  This turns on
power to the Printer.
2.  Switch the printer power switch to the On (I) position.  This
turns on the printer.
3.  Switch on the Controller.
NOTE:  During the warm-up cycle, the message display
provides a FUSER CALIBRATING message...

POWERING ON AND OFF
8XEROX Wide Format 510dp OPERATOR MANUAL
Powering off
To power off:
1.  Switch the printer power switch to the Off (O) position.  This
turns off the printer.
2.  Switch off the Controller.
3.  Switch the circuit breaker to the Off (O) position.  This turns off
power to the Printer.
Power consumption modes
The printer has four power consumption modes.  They are:
Running
The printer is capable of making prints immediately in this mode.
When in this mode, the message display indicates...

XEROX WIDE FORM AT 510dp OPERATOR MANUAL9
3. Media
This chapter provides the following information:
•  A listing of the ways in which the printer notifies you when a
media roll is low or empty
•  The procedure for loading roll media into the media drawers
•  The procedure for specifying the media size and type for each
media drawer
•  The procedure for bypassing the media drawers and manually
feeding cut sheets into the printer
•  An explanation of the automatic roll switching feature
•  Tips for safe...

MEDIA
10XEROX WIDE FORM AT 510dp OPERATOR MANUAL
Loading the roll media
To load a media roll:
1.  Raise the output tray all the way so that it rests on top of the
printer.
2.  Lift the handle of the applicable drawer and open the drawer
all the way.
NOTE:  In some locations, high or low humidity affects the media
and causes print quality problems.  To resolve the problems, a
sealed media drawer can be installed on the printer in place of one
of the standard media drawers.
3.  Do one of the following:
•...