Xerox Phaser 6180DN User Manual

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-13
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
PCL
Specifies the settings for the PCL.
Item Description
Auto Adjust Regi Adjust the color registration automatically. Selecting On adjusts the color 
registration automatically. The default is On.
Adjust ColorRegi Correct the color registration manually. For details, refer to Color Registration on 
page 6-6.
■Auto Adjust 
Correct...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-14
Output Size Specifies the paper size to be printed.
■A4
■B5
■A5
■8.5x11
■8.5x13
■8.5x14
■7.25x10.5
■Monarch Env
■DL Envelope
■C5 Envelope
■Com 10 Env
■Custom
Orientation The paper printing direction can be selected from Portrait and Landscape. The 
default is Portrait.
2 Sided Specifies the 2-sided printing settings.
■2-Sided Print
Specifies whether to perform 2-sided printing. The default is Off.
■Binding Edge
Specifies the binding...

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-15
Control Panel
Specifies whether to limit menu operations with a password to avoid changing the printer 
settings by accident.
Line Termination Sets the line termination.
■Off (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
■Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
■Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
■CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Output Color...

Menu List
Phaser® 6180 Color Laser Printer
5-16
Menu List
The Menu Map helps you navigate the control panel menus. To print the Menu Map:
1.On the control panel, press the 
Menu button, select Information Pgs, and then press the 
OK button.
2.Select 
Menu Map, and then press the OK button to print.
Note:Print the Menu Map to see other information pages available for printing.
See also: 
Description of Menu Items on page 5-4
Main operation and buttons on the control panel
Display/close the Menu...

Phaser® 6180 Color Laser Printer
6-1 This chapter includes:
■Print-Quality Problems on page 6-2
■Color Registration on page 6-6
Print Quality
Downloaded From ManualsPrinter.com Manuals 

Print-Quality Problems
Phaser® 6180 Color Laser Printer
6-2
Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table to correct 
the problem.
If the print quality does not improve after carrying out the appropriate action, contact Xerox 
Customer Support or your reseller.
Symptom Reason/Action
Faded printouts Multiple colors faded:
■The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and...

Print-Quality Problems
Phaser® 6180 Color Laser Printer
6-3
Vertical black or color 
streaksMultiple colored streaks or lines:
■The transfer unit, or fuser, is old or damaged.
Check the condition of the transfer unit and fuser, and replace as 
necessary.
■The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if 
necessary.
Streak in only one color:
■Check the condition of the print cartridge, and replace as necessary.
Verify that...

Print-Quality Problems
Phaser® 6180 Color Laser Printer
6-4
Blank pages Two or more sheets may be feeding at once.
Remove the paper stack from the tray, fan it, and reinsert it.
The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if 
necessary.
The transfer unit is old or damaged.
Replace the transfer unit.
The high-voltage supply is defective.
See the Xerox Support website, www.xerox.com/office/6180support
, for 
assistance....

Print-Quality Problems
Phaser® 6180 Color Laser Printer
6-5
Vertical blanks The laser is being blocked. 
Remove the print cartridges and clean all debris from the laser len(s) with 
a lint free cloth.
The transfer unit, or fuser, is old or damaged.
Check the condition of the transfer unit and fuser, and replace as 
necessary.
The print cartridges are not Xerox print cartridges.
■Check the condition of the print cartridge, and replace as necessary.
Verify that the print cartridges (C/M/Y/K) meet...

Color Registration
Phaser® 6180 Color Laser Printer
6-6
Color Registration
Color registration can be adjusted by the printer automatically, or you can manually adjust it. 
Color registration should be adjusted any time the printer is moved.
Automatic Color Registration Adjustment
Use the following procedure to perform automatic color registration adjustment.
Note:An automatic color registration adjustment is performed every time a new print 
cartridge is installed.
1.Press the Menu button to display the...