Xerox Phaser 6180DN User Manual

Setting Paper Types and Sizes
Phaser® 6180 Color Laser Printer
4-8
Setting Paper Sizes
1.Press the Menu button to display the Menu screen.
2.Select Tray Settings, and then press the OK button.
3.Select the tray, and then press the OK button.
4.Select Paper Size for Custom Size only, and then press the OK button.
Note:Select DriverSpecified when you set a custom size paper from Tray 1 (MPT).
5.Press the Menu button.
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 6180 Color Laser Printer
4-9
Loading Paper
This section includes:
■Loading Paper in Tray 1 (MPT) on page 4-9
■Loading Paper in Trays 2–3 on page 4-12
Loading Paper in Tray 1 (MPT)
Use Tray 1 (MPT) for a wide range of media including:
■Plain paper
■Card stock
■Labels
■Envelopes
■Transparencies
■Glossy paper
■Specialty media including business cards, postcards, trifold brochures, and weatherproof 
paper
■Pre-printed paper (paper already printed on one side)
■Custom size paper
See...

Loading Paper
Phaser® 6180 Color Laser Printer
4-10 Make sure of the following points to avoid any troubles during printing.
■Do not load different types of paper at the same time.
■Use high quality paper for laser printers to print at high quality. See About Paper on 
page 4-5.
■Do not remove or add paper to Tray 1 (MPT) when printing, or if there is any paper still in 
the tray. Doing so may cause a paper jam.
■Do not put any objects other than paper on Tray 1 (MPT). Also, do not push or force down...

Loading Paper
Phaser® 6180 Color Laser Printer
4-11 3.Insert all media facedown and top edge first into Tray 1 (MPT).
Note:Do not force the paper.
4.Slide the width guides until they rest lightly against the edge of the paper stack.
Note:Be careful not to bend the paper.
If Tray 1 (MPT) is configured for DriverSpecified, configure the paper size and type in the 
print driver.
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings 
for the tray on the control panel in...

Loading Paper
Phaser® 6180 Color Laser Printer
4-12
Loading Paper in Trays 2–3
Use Trays 2–3 for a wide range of media including:
■Plain paper
■Thin card stock
■Glossy paper
■Labels
See also: 
Printing on Specialty Media on page 4-24
Loading Paper in Trays 2–3
This section describes how to load paper in the standard and optional paper trays. All trays are 
loaded the same way.
Caution:Do not remove the tray during printing. It may cause a paper jam.
1.Pull the tray out of the printer until it stops. Hold...

Loading Paper
Phaser® 6180 Color Laser Printer 4-13
2.
Slide the width guides to the edge of the tray . The width guides should be fully extended.
Note: When loading paper that is  216 mm (8.5 in.) wide, such as Letter or Legal size 
paper, set the tab on the side of  the tray to the [8.5] position.
3. Squeeze the green tab on the length guide, an d then slide the tray until the arrow lines up 
with the appropriate paper size . The guide clicks into place.
6180-013
6180-014
Downloaded From...

Loading Paper
Phaser® 6180 Color Laser Printer
4-14 4.Before loading the print media, flex the sheets back and forth, and then fan them. 
Straighten the edges of the stack on a level surface.
5.Place the print media into the tray with the print side face-up.
Note:Do not exceed the maximum fill line in the tray. Overfilling the tray may cause 
paper jams.
6.Slide the width guides and length guide until they rest lightly against the edge of the print 
media stack.
6180-015
6180-016
Downloaded From...

Loading Paper
Phaser® 6180 Color Laser Printer
4-15 7.Insert the tray into the printer, and push until it stops.
Caution:Do not use excessive force on the tray. Doing so could damage the tray or the inside 
of the printer.
6180-017
Downloaded From ManualsPrinter.com Manuals 

Selecting Printing Options
Phaser® 6180 Color Laser Printer
4-16
Selecting Printing Options
This section includes:
■Selecting Printing Preferences (Windows) on page 4-16
■Selecting Options for an Individual Job (Windows) on page 4-17
■Selecting Options for an Individual Job (Macintosh) on page 4-19
Selecting Printing Preferences (Windows)
Printer preferences control all of your print jobs, unless you override them specifically for a 
job. For example, if you want to use automatic 2-sided printing for...

Selecting Printing Options
Phaser® 6180 Color Laser Printer
4-17
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before 
sending the job to the printer. For example, if you want to use Photo print-quality mode for a 
particular graphic, select this setting in the driver before printing that job.
1.With the desired document or graphic open in your application, access the Print dialog 
box.
2.Select the Phaser...