Xerox Phaser 6130N User Manual

Print After Checking Printing Result - Proof Print
Phaser® 6130 Printer
4-37
Printing from the Control Panel
This section explains the procedure to print and delete data stored in the printer by Proof Print.
1.On the control panel, press the Back Arrow button to display the 
Walk-Up Features 
menu.
2.Select 
Walk-Up Features, and then press the OK button.
3.Select 
Proof Print, and then press the OK button.
4.Select your user name, and then press the OK button.
5.Select 
Print and Delete or Print and...

Phaser® 6130 Printer
5-1 This chapter includes:
 ■Control Panel Menus on page 5-2
■Description of Menu Items on page 5-4
■Menu List on page 5-15
Using the Control 
Panel Menus
Downloaded From ManualsPrinter.com Manuals 

Control Panel Menus
Phaser® 6130 Printer
5-2
Control Panel Menus
This section includes:
 ■Menu Configuration on page 5-2
■Changing Menu Settings on page 5-3
Menu Configuration
The menus that can be accessed from the control panel are as follows:
Each menu is configured in different levels. Set the printer settings by selecting the objective 
menus or items structure level.
See also: 
Description of Menu Items on page 5-4
Menu Content
Information Pages Use the Information Pages menu to print various types...

Control Panel Menus
Phaser® 6130 Printer
5-3
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1.To display the menu screen, press the Menu button at the print screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
System Setup is displayed, and then 
press the Forward Arrow or OK button.
4.Press the Up Arrow...

Description of Menu Items
Phaser® 6130 Printer
5-4
Description of Menu Items
This section includes:
 ■Tray Settings on page 5-4
■Information Pages on page 5-5
■Billing Meters on page 5-6
■Admin Menu on page 5-6
Tray Settings
There is one submenu under the Tray Settings menu: Tray. You can set paper size, paper type, 
or Display Popup for this tray.
Common Settings for the Paper Tray
When the size or type of paper that is loaded is different from the setting, the print quality may 
fall or paper may jam....

Description of Menu Items
Phaser® 6130 Printer
5-5
Information Pages
Prints various types of reports and lists.
■The information pages are printed on A4 size paper. Load A4 size paper into the tray. 
■For the procedure for printing information pages, refer to Printing Information Pages on 
page 5-5.
Printing Information Pages
Information pages are printed from the control panel.
1.Press the Menu button to display the Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Information Pgs is...

Description of Menu Items
Phaser® 6130 Printer
5-6
Billing Meters
Displays the number of processed print jobs on the control panel. The meter is divided 
according to the color modes.
See also: 
Checking Page Counts on page 8-9
Admin Menu
This menu contains seven submenus:
■Network Setup
■USB Setup
■System Setup
■Maintenance Mode
■PCL Setup
■PostScript Setup
■Control Panel
Item Description
Color Impressions Displays the total number of pages printed in color.
Black Impressions Displays the total number...

Description of Menu Items
Phaser® 6130 Printer
5-7
Network Setup
Specifies printer settings affecting jobs sent to the printer through a network port.
■The settings in the Network Setup menu cannot be set when entering this menu during 
printing.
■You need to restart the printer to activate the new settings. After making the settings, turn 
off the printer and then turn it on again.
Item Description
Ethernet Specifies the communication speed and the modes of Ethernet.
■Auto (default) 
Automatically...

Description of Menu Items
Phaser® 6130 Printer
5-8
USB Setup
Specifies the settings for USB.
Protocol Set Enable when using the protocol. When Disable is selected, the protocol 
cannot be activated.
■LPR (default: Enable)
■Port 9100 (default: Enable)
■IPP (default: Enable)
■SMB TCP/IP (default: Enable)
■SMB NetBEUI (default: Enable)
■FTP (default: Enable)
■NetWare (default: Enable)
■SNMP (default: Enable)
■Email Alerts (default: Enable)
■CentreWare IS (default: Enable)
■Bonjour (mDNS) (default: Enable)...

Description of Menu Items
Phaser® 6130 Printer
5-9
System Setup
System Setup menu is used to make the printer operation settings, such as for alarm and power 
saver mode.
Item Description
Powe r S ave r  
TimerSpecify the transitional time to Power Saver between 5 and 60 minutes in 
increments of 1 minute.
■5 min. to 60 min. (default: 30 min.)
■For details, refer to Power Saver Mode on page 2-8
Audio Tone Specifies whether to turn on the alarm when an error occurs in the printer. You 
cannot adjust the...