Xerox Phaser 6130N User Manual

Printing on Specialty Media
Phaser® 6130 Printer
4-27
Printing Glossy Paper
Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/6130supplies
.
 
Guidelines
■Do not open sealed packages of glossy paper until you are ready to load them into the 
printer.
■Leave glossy paper in the original wrapper, and leave the packages in the shipping carton 
until ready to use....

Printing on Specialty Media
Phaser® 6130 Printer
4-28 2.Open the output tray to hold the printed sheets.
3.Fan the glossy paper to release sheets that are stuck together.
4.Insert the glossy paper into the paper tray, and adjust the paper guides to fit the paper.
■Place the side to be printed faceup.
■Do not load more than 25 sheets.
6130-021
6130-014
6130-085
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6130 Printer
4-29 5.In the printer driver, select either Glossy Paper as the paper type or Tr a y as the paper tray.
Printing Glossy Paper from the Manual Feed Slot
1.Slide the width guides of the manual feed slot to fit the appropriate media.
2.Open the output tray to hold the printed sheets.
6130-020
6130-021
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6130 Printer
4-30 3.Insert the paper into the tray. 
4.If necessary, press the paper guides inward to fit the paper.
5.On the control panel, select the glossy paper type:
a.Select 
Tray Settings, and then press the OK button.
b.Select 
Paper Type, and then press the OK button.
c.Select 
Glossy Paper, and then press the OK button.
6.In the printer driver, select either 
Glossy Paper as the paper type or the appropriate tray as 
the paper tray.
6130-079
Downloaded From...

Printing Custom Size
Phaser® 6130 Printer
4-31
Printing Custom Size
This section explains how to print on custom size paper, such as long paper using the PCL 
print driver.
Custom size paper can be loaded in each tray. The way to load custom size paper in the paper 
tray is the same as the one to load standard size paper.
See also: 
Loading Paper in the Manual Feed Slot on page 4-12
Loading Paper in the Paper Tray on page 4-8
Setting Paper Types and Sizes on page 4-7
Defining Custom Paper Sizes
Before...

Printing Custom Size
Phaser® 6130 Printer
4-32 6.To assign a paper name, select the Name Paper Size check box, and then enter the name 
in Paper Name. Up to 14 characters can be used for the paper name.
7.If necessary, repeat steps 4 to 6 to define another custom size.
8.Click OK twice.
Using the PostScript Driver
On the PostScript print driver, set the custom size in the Custom Paper Size dialog box. This 
section explains the procedure using Windows XP as an example.
1.From the Start menu, select...

Printing Custom Size
Phaser® 6130 Printer
4-33
Using the PostScript Driver
The procedure to print on custom size paper using the PostScript print driver is as follows.
1.From the File menu, select Print.
2.Select this printer as the printer to be used and click Preferences.
3.Select the Paper/Output tab.
4.From Paper Size, select Custom Page Size.
5.Specify the length of the short edge and long edge under Setting For. You can specify the 
values either by entering them directly or using the Up Arrow and...

Printing Confidential Document - Secure Print
Phaser® 6130 Printer
4-34
Printing Confidential Document - Secure Print
When at least 256 MB of memory are added, you can use the secure print feature.
Note: The data stored in the RAM disk is erased when the printer is switched off.
About Secure Print
Secure Print is a feature that allows you to assign a password to a print job from the computer, 
send it to the printer for temporarily storing, and start printing the data from the control panel. 
You can...

Printing Confidential Document - Secure Print
Phaser® 6130 Printer
4-35 6.If you want to use a specified document name to access the document from the control 
panel:
a.In the Retrieve Document Name field, select Enter Document Name.
b.In the Document Name field, enter the name that will appear on the control panel.
7.If you want the printer to automatically name the document using the applications 
document name, in the Retrieve Document Name field, select Auto Retrieve.
8.Click OK twice to accept the...

Print After Checking Printing Result - Proof Print
Phaser® 6130 Printer
4-36
Print After Checking Printing Result - Proof Print
When at least 256 MB of memory are added, you can use the proof print feature.
Note: The data stored in the RAM disk is erased when the printer is switched off.
About Proof Print
Proof Print is a feature that allows you to store the print data of multiple copies in the memory, 
print out only the first set to check the print result and if satisfactory, print the remaining...