Xerox Phaser 6130N User Manual

Setting Paper Types and Sizes
Phaser® 6130 Printer
4-7
Setting Paper Types and Sizes
Setting the Paper Tray
When loading paper in the paper tray, set the paper size and type on the control panel when 
printing.
Note: When you set select None from the Paper Type dropdown in the PostScript driver, 
printing will default to the control panel settings. Printing will be performed only when the 
settings for the paper size and type configured on the print driver match the settings on the 
control panel. When...

Loading Paper
Phaser® 6130 Printer
4-8
Loading Paper
This section includes:
 ■Loading Paper in the Paper Tray on page 4-8
■Loading Paper in the Manual Feed Slot on page 4-12
Loading Paper in the Paper Tray 
Use the paper tray for a wide range of media including:
■Plain paper
■Card stock
■Labels
■Glossy paper
■Specialty media including business cards, postcards, trifold brochures, and weatherproof 
paper
■Pre-printed paper (paper already printed on one side)
■Custom size paper
See also: 
About Paper on...

Loading Paper
Phaser® 6130 Printer
4-9 Make sure of the following points to avoid any troubles during printing.
■Do not load different types of paper at the same time.
■Use high quality paper for laser printers to print at high quality. See About Paper on 
page 4-5.
■Do not remove or add paper to the tray when printing, or if there is any paper still in the 
tray. Doing so may cause a paper jam.
■Do not put any objects other than paper on the tray. Also, do not push or force down the 
paper tray.
■Always...

Loading Paper
Phaser® 6130 Printer
4-10 3.Slide the width guides to the edge of the tray. The width guides should be fully extended.
4.Insert all media faceup and top edge first into the paper tray.
Note: Do not force the paper.
6130-059
6130-052
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 6130 Printer
4-11 5.Slide the width guides until they rest lightly against the edge of the paper stack.
Note: Be careful not to bend the paper.
When Size Mismatch is set to Use Printer Settings in the PostScript driver, you need to set 
the paper type and size settings for the tray on the control panel in advance.
See also: 
Setting Paper Types and Sizes on page 4-7
 
6130-052
Downloaded From ManualsPrinter.com Manuals 

Loading Paper
Phaser® 6130 Printer
4-12
Loading Paper in the Manual Feed Slot
Use the Manual Feed Slot for a wide range of media including:
■Plain paper
■Thin card stock
■Glossy paper
■Labels
■Envelopes
See also: 
Printing on Specialty Media on page 4-20
Loading Paper in the Manual Feed Slot
This section describes how to feed paper in the manual feed slot.
Make sure of the following points to avoid any troubles during printing.
■Use several sheets of the media when adjusting the paper width guides....

Loading Paper
Phaser® 6130 Printer
4-13 2.Open the output tray to hold the printed sheets.
3.Place the print media into the slot with the print side facedown and the top of the sheet 
entering the printer first.
6130-021
6130-051
Downloaded From ManualsPrinter.com Manuals 

Selecting Printing Options
Phaser® 6130 Printer
4-14
Selecting Printing Options
This section includes:
 ■Selecting Printing Preferences (Windows) on page 4-14
■Selecting Options for an Individual Job (Windows) on page 4-15
■Selecting Options for an Individual Job (Macintosh) on page 4-17
Selecting Printing Preferences (Windows)
 
Printer preferences control all of your print jobs, unless you override them specifically for a 
job.
To select printer preferences:
1.Select one of the following options:...

Selecting Printing Options
Phaser® 6130 Printer
4-15
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before 
sending the job to the printer. For example, if you want to use Enhanced print-quality mode for 
a particular graphic, select this setting in the driver before printing that job.
1.With the desired document or graphic open in your application, access the Print dialog 
box.
2.Select the Phaser 6130...

Selecting Printing Options
Phaser® 6130 Printer
4-16 See the following table for specific PCL printing options:
Note: If your driver does not display the options listed in the table above, see Enabling 
Options on page 7-11 for more information.
PCL Printing Options for Windows Operating Systems 
Operating 
System Driver Tab Printing Options
Windows Vista, 
Windows 2000, 
Windows XP, or 
Windows Server 
2003Paper/Output tab
■Job Type
■Document size, paper type, and tray selection
■Feed orientation
■Saved...