Xerox Phaser 6130N User Manual

User Safety
Phaser® 6130 Printer
1-5
■Place the printer on a level, solid non-vibrating surface with adequate strength for the 
weight of the printer. It should be within 1° of horizontal with all four feet in solid contact 
with the surface. The printer weight with consumables is 17.2 kg (38 lb.). 
■Do not place the printer in locations exposed to magnetic forces.
■Do not place the printer in damp locations.
■Do not place the printer in locations susceptible to vibrations.
Printing Safety Guidelines...

User Safety
Phaser® 6130 Printer
1-6
Moving the Printer
Follow these guidelines to avoid injuring yourself or damaging the printer:
■Turn off the printer and unplug all power and communication cables before moving the 
printer.
■Always lift the printer from the designated lift points.
6130-071
17.2 kg
38 lb
6130-072
Downloaded From ManualsPrinter.com Manuals 

User Safety
Phaser® 6130 Printer
1-7
■Carry the printer without tilting it.
Caution: Do not tilt the printer more than 10 degrees to the front/back or right/left. 
Tilting more than 10 degrees may lead to toner inside the printer spilling out.
■Do not place any food or liquids on the printer.
Caution: Damage to the printer resulting from improper moving or failure to repackage the 
printer properly for shipment, is not covered by the warranty, service agreement, or Total 
Satisfaction Guarantee. The...

Printer Specifications
Phaser® 6130 Printer
1-8
Printer Specifications
Item Contents
Dimensions 400 (W) x 445 (D) x 389 (H) mm
Weight Printer: 17.2 kg (38 lb.) including consumables
Warm-up time
30 seconds or less (when power is switched on, temperature: 22
° C)
However, the printer’s electrical system is ready 10 seconds after 
switching on the printer.
Continuous print speed 
*1Color:
1 sided print: 12 sheets/min
*2
Black-and-white:
1 sided print: 16 sheets/min
*2 
Important
*1 The print speed may...

Regulatory Information
Phaser® 6130 Printer
1-9
Regulatory Information
This product has been tested to electromagnetic emission and immunity standards. These 
standards are designed to mitigate interference caused or received by this product in a typical 
office environment.
United States (FCC Regulations)
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection...

Regulatory Information
Phaser® 6130 Printer
1-10
European Union
■January 1, 1995: Low Voltage Directive 73/23/EEC as amended by 93/68/EEC
■January 1, 1996: Electromagnetic Compatibility Directive 89/336/EEC
This product, if used properly in accordance with the users instructions, is neither dangerous 
for the consumer nor for the environment.
To ensure compliance with European Union regulations, use shielded interface cables.
A signed copy of the Declaration of Conformity for this product can be obtained...

Material Safety Data Sheet
Phaser® 6130 Printer
1-11
Material Safety Data Sheet
For Material Safety Data information regarding your Phaser 6130 printer, go to:
■United States and Canada: www.xerox.com/msds
■European Union: www.xerox.com/environment_europe
For the Customer Support Center phone numbers, go to www.xerox.com/office/worldcontacts.
Downloaded From ManualsPrinter.com Manuals 

Product Recycling and Disposal
Phaser® 6130 Printer
1-12
Product Recycling and Disposal
All Countries
If you are managing the disposal of your Xerox product, please note that the product may 
contain, lead, mercury, perchlorate, and other materials whose disposal may be regulated due 
to environmental considerations. The presence of lead, mercury, and perchlorate is fully 
consistent with regulations applicable at the time that the product was placed on the market. 
For disposal information, contact your...

Product Recycling and Disposal
Phaser® 6130 Printer
1-13
Professional/Business Environment
In accordance with European legislation, end of life electrical and electronic equipment 
subject to disposal must be managed within agreed procedures.
Prior to disposal, please contact your local reseller or Xerox representative for end of life 
takeback information.
North America
Xerox operates an equipment takeback and reuse/recycle program. Contact your Xerox sales 
representative (1-800-ASK-XEROX) to determine...

Phaser® 6130 Printer
2-1 This chapter includes:
 ■Main Components and Their Functions on page 2-2
■Control Panel on page 2-6
■Power Saver Mode on page 2-8
■Checking Status of Print Data on page 2-9
■Displaying Optional Accessory Configuration and Paper Tray Settings on page 2-10
■More Information on page 2-11
Printer Features
Downloaded From ManualsPrinter.com Manuals