Xerox Phaser 4510DN User Manual

							Cleaning the Printer
Phaser® 4510 Laser Printer
5-3 2.Remove the feed roll from the paper tray shaft.
a.Push down on the shaft of the feed roll (1), and then widen the tab of the feed roll to 
loosen it (2).
b.Remove the feed roll from the paper tray shaft (3).
3.Clean the rollers with a damp cloth.
1
3
2
4510-116
4510-117
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer
Phaser® 4510 Laser Printer
5-4 4.Reinsert the feed roll on the paper tray shaft.
5.Align the tabs on the feed roll with the slots on the shaft (1), and then push the feed roll 
completely onto the shaft (2).
6.Push the paper tray back into the printer.
1
2
4510-118
4510-044
Downloaded From ManualsPrinter.com Manuals 
						

							Ordering Supplies
Phaser® 4510 Laser Printer
5-5
Ordering Supplies
This section includes:
■Consumables on page 5-5
■Routine Maintenance Items on page 5-5
■When to Order Supplies on page 5-6
■Recycling Supplies on page 5-6
Certain consumables and routine maintenance items need to be ordered occasionally. Each 
supply includes the installation instructions.
Consumables
Print cartridges are the only consumable. For information about supplies, go to 
www.xerox.com/office/4510supplies
. Print cartridges include installation instructions on the 
box.
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic 
replacement. Replacements may be parts or kits. Routine maintenance items are typically 
customer replaceable.
The only routine maintenance item for the Phaser 4510 Laser Printer is the maintenance kit. 
Access the 
Supplies Info menu on the control panel to see the remaining life of the 
maintenance kit.
The maintenance kit contains:
■Fuser
■Transfer roller
■12 feed rollers
Downloaded From ManualsPrinter.com Manuals 
						

							Ordering Supplies
Phaser® 4510 Laser Printer
5-6
When to Order Supplies
The control panel displays a warning when the supply nears its replacement time. Verify that 
you have replacements on hand. It is important to order these supplies when the messages first 
appear to avoid interruptions to your printing. The control panel displays an error message 
when the supply must be replaced.
To view the current status of your printer supplies, print the Supplies Usage page:
1.On the control panel, select 
Information, and then press the OK button.
2.Select 
Supplies Info, and then press the OK button.
3.Select 
Supplies Usage Page to print.
To order supplies, contact your local reseller or go to the Xerox Supplies website at 
www.xerox.com/office/4510supplies
.
Caution:Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service 
Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or 
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies 
not specified for this printer. The Total Satisfaction Guarantee is available in the United States 
and Canada. Coverage may vary outside these areas; please contact your local representative 
for details.
Recycling Supplies
For information on Xerox supplies recycling programs, go to www.xerox.com/gwa.
Downloaded From ManualsPrinter.com Manuals 
						

							Extended Periods of Non-Use
Phaser® 4510 Laser Printer
5-7
Extended Periods of Non-Use
Perform the following procedure if the printer will not be used for a long period of time.
1.Turn the power switch to off.
2.Remove the power cord and other cables.
Warning:Due to the risk of electric shock, you should not touch the power cord with wet 
hands. For additional safety information, see User Safety on page A-1.
3.Empty all paper trays, and store the media in a location free of humidity and dust.
4510-011
Downloaded From ManualsPrinter.com Manuals 
						

							Moving and Repacking the Printer
Phaser® 4510 Laser Printer
5-8
Moving and Repacking the Printer
This section includes:
■Precautions for Moving the Printer on page 5-8
■Moving the Printer Within the Office on page 5-8
■Preparing the Printer for Shipment on page 5-8
See also: 
User Safety on page A-1
Precautions for Moving the Printer
To view precautions and guidelines for safely moving your printer, see the User Safety 
appendix in this user guide.
Moving the Printer Within the Office
The printer can be safely moved from one location within an office to another as long as it 
travels in an upright position, gently over smooth surfaces. Any jarring movement, such as 
pushing the printer over a raised door threshold or across a parking lot, can damage the printer.
Preparing the Printer for Shipment
Caution:The print cartridge must be removed before shipping the printer. Repack the print 
cartridge in a plastic bag, and seal the bag.
Repack the printer using the original packing material and boxes or a Xerox repackaging kit. 
Additional instructions for repacking the printer are provided in the repackaging kit. If you do 
not have all the original packaging, or are unable to repackage the printer, contact your local 
Xerox service representative.
Caution:Damage to the printer resulting from improper moving or failure to repackage the 
printer properly for shipment, is not covered by the warranty, service agreement, or Total 
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and 
Canada. Coverage may vary outside these areas; please contact your local representative for 
details.
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser® 4510 Laser Printer
6-1 This chapter includes:
■Clearing Paper Jams on page 6-2
■Getting Help on page 6-24
See also: 
Print Quality on page 4-1
Cleaning the Feed Roller on page 5-2
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							Clearing Paper Jams
Phaser® 4510 Laser Printer
6-2
Clearing Paper Jams
This section includes:
■Preventing Jams on page 6-2
■Jam at Tray 1, 2, 3, or 4 on page 6-3
■Jam at the Exit and Jam at the Rear on page 6-7
■Jam at the Exit and Jam at the Rear (with Duplex Unit) on page 6-9
■Jam at the Exit - Open Top Cover to Clear on page 6-11
■Jam at the Top Cover on page 6-13
■Jam at the Duplex Unit on page 6-17
■Jam at the Stacker on page 6-18
■Paper Size Jam on page 6-20
Note:If you clear a jam without opening and closing the top cover, you still need to perform 
this step in order to clear the error message on the control panel.
See also: 
User Safety on page A-1
Preventing Jams
To reduce the occurrence of paper jams, follow the guidelines and instructions in the Printing 
Basics chapter in this guide. It includes information about supported paper and media, guides 
for usage, and instructions for properly loading paper in the trays.
Downloaded From ManualsPrinter.com Manuals 
						

							Clearing Paper Jams
Phaser® 4510 Laser Printer
6-3
Jam at Tray 1, 2, 3, or 4
The control panel will specify the tray that has a paper jam. On the control panel, you can 
press the Help (?) button to view information about the paper jam.
To clear the jam:
1.Pull the tray(s) specified on the control panel completely out of the printer.
Note:For all trays except Tray 2, pull out the specified tray and all trays above it. For 
example, if the jam is at Tray 3, pull out Trays 1, 2, and 3. If you have a jam at Tray 2, pull 
out Tray 2 only. If you have a jam at Tray 1, pull out Trays 1 and 2. It is not necessary to 
pull out all the trays.
4510-028
4510-036
Downloaded From ManualsPrinter.com Manuals 
						

							Clearing Paper Jams
Phaser® 4510 Laser Printer
6-4 2.Pull jammed paper from the printer tray slot.
3.Remove crumpled paper from the tray.
4.If you have a stacker, remove paper from the stacker, and then lift the stacker tray.
4510-037
4510-038
4510-0054510-006
Downloaded From ManualsPrinter.com Manuals