Xerox Phaser 4500DT User Manual

Supported Papers
Phaser™ 4500 Laser Printer
2-10
Pa pe r tha t Ma y Da ma ge  Your Pri nte r
Your printer is designed to be used with a variety of paper types. For more information about 
supported papers, go to Reference/Printing/Supported Papers on the User Documentation CD-
ROM.
Other media types can cause poor print quality, increased paper jams, or damage to your 
printer. 
Following are examples of unacceptable paper:
■Rough or porous media
■Paper that has been photocopied
■Paper with cutouts or...

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
2-11
Ba si c Pri nti ng
This topic includes:
■Loading Paper in Tray 1 on page 2-11
■Loading Paper in Trays 2-4 on page 2-15
■Factors Affecting Printer Performance on page 2-18
Follow these steps to print jobs:
1.Load paper in the tray.
2.Adjust the tray guides.
3.If prompted by the front panel, confirm the paper type and/or size and change it as 
required.
4.Select File/Print to adjust the printing options in the printer...

Basic Printing
Phaser™ 4500 Laser Printer
2-12 1.Pull the tray completely out of the printer.
2.If loading paper having a different width or length, adjust the width and length guides.
3.Extend the tray to accommodate legal or US Folio (legal 13) paper by moving the release 
tabs to the sides of the tray and pulling out on the front of the tray. Contract the tray by 
moving the release tabs to the sides of the tray and pushing in the front of the tray.
4500-001
4500-0244500-023
4500-04500-060
Downloaded...

Basic Printing
Phaser™ 4500 Laser Printer
2-13 4.Load the paper, transparencies, or other specialty media in the tray.
Note
Do not load paper, transparencies, or specialty media above the fill lines inside the 
tray. Only use flat paper, transparencies, or specialty media. If frequent jamming 
occurs with card stock or heavier paper that is less than 175 mm (7 in.) long, reduce 
the number of sheets in the tray.
5.Slide the side guide firmly against the paper or other specialty media.
4500-016
4500-003...

Basic Printing
Phaser™ 4500 Laser Printer
2-14 6.Insert the tray into the printer slot and push it completely to the back of the printer.
7.Confirm or change the paper size and type when prompted by the front panel.
4500-040
4500-020
Phaser 4500
Downloaded From ManualsPrinter.com Manuals 

Basic Printing
Phaser™ 4500 Laser Printer
2-15
Loa di ng Pa pe r i n Tra ys 2-4
Use Trays 2-4 for all paper, transparencies, and specialty media except 3 x 5 in. index cards.
1.Pull the tray completely out of the printer.
2.If loading paper having a different width or length, adjust the width and length guides.
Caution
If you change the type of paper in a tray, you 
must change the paper type on the front panel 
to match the paper that you loaded. If you fail 
to do this, print-quality problems can occur...

Basic Printing
Phaser™ 4500 Laser Printer
2-16 3.Extend the tray to accommodate legal or US Folio (legal 13) paper by moving the release 
tabs to the sides of the tray and pulling out on the front of the tray. Contract the tray by 
moving the release tabs to the sides of the tray and pushing in the front of the tray.
4.Load the paper, transparencies, or other specialty media in the tray.
Note
Do not load paper, transparencies, or specialty media above the fill lines inside the 
tray. Only use paper,...

Basic Printing
Phaser™ 4500 Laser Printer
2-17 5.Slide the side guide firmly against the paper or other specialty media.
6.Insert the tray into the printer slot and push it completely to the back of the printer.
7.Set the paper size and type when prompted by the front panel.
Note
For more information about printing options and other selections, click the Help button on 
the printer driver tab to view the online help.
4500-088
4500-077
4500-020
Phaser 4500
Downloaded From ManualsPrinter.com Manuals 

Basic Printing
Phaser™ 4500 Laser Printer
2-18
F a ctors Affe cti ng Pri nte r Pe rforma nce
Many factors affect a print job. They include the print speed (stated in number of pages per 
minute), the media used, download time, and printer processing time.
The computer download time and printer processing time are affected by several factors 
including:
■Printer memory
■Connection type (network, parallel or USB)
■Network operating system
■Printer configuration
■File size and type of graphics
■Computer...

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
2-19
Adjusting Printing Options
This topic includes:
■Setting Printing Options on page 2-19
■Selecting Properties for an Individual Job (Mac) on page 2-23
■Selecting Print-Quality Modes on page 2-25
Se tti ng Pri nti ng Opti ons
Many printing options are available with the Xerox printer driver. 
Se l e cti ng Pri nti ng Pre fe re nce s i n Wi ndows
Printer preferences control all of your jobs, unless you overwrite them...