Xerox Phaser 4500DT User Manual

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
3-30
Ma ci ntosh
This topic includes:
■Requirements on page 3-30
■Quick CD-ROM Install Steps on page 3-30
■Enabling and Using EtherTalk for Mac OS 9.x on page 3-30
■Enabling and Using TCP/IP for Mac OS 9.x on page 3-31
■Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version 10.1 or Higher on 
page 3-33
■Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Versions 10.1 and 10.2) on 
page 3-34
Re qui re me nts
■A...

Macintosh
Phaser™ 4500 Laser Printer
3-31
Ena bl i ng a nd Usi ng TCP/IP for Ma c OS 9. x
This section provides installation and troubleshooting steps for Macintosh OS 9.x.
Se tti ng Up the  Ma ci ntosh Ethe rne t Port for TCP/IP
Perform the following procedure to set up your Macintosh TCP/IP:
1.Click Control Panels from the Apple menu. 
2.Click TCP/IP.
3.Click Ethernet from the Connect via menu.
4.Specify one of the following methods for the Macintosh to obtain its IP address: 
■Manually
■DHCP
Note
If...

Macintosh
Phaser™ 4500 Laser Printer
3-32
Cre a ti ng a n AppSocke t Pri nte r wi th La se rWri te r 8. 6
Xerox provides Macintosh AppSocket printing with PhaserPort for Mac OS on the printer’s 
Printer Installer and Utilities CD-ROM. PhaserPort for Mac OS provides a bi-directional, 
high-speed communications channel using the new plug-in communication architecture of 
Apple LaserWriter version 8.6.
AppSocket provides feedback about print job status which is not available through LPR.
Pha se rPort for Ma...

Macintosh
Phaser™ 4500 Laser Printer
3-33
Ena bl i ng or Usi ng TCP/IP or AppleTalk for Mac OS X, Version 
10. 1 or Hi ghe r
Re qui re me nts
Verify that you are running Mac OS X, version 10.1. The previous versions of Mac OS X do 
not fully support PostScript printing and printer features.
Se tti ng up the  Ma ci ntosh Ethe rne t Port for TCP/IP or Appl e Ta l k
Perform the following procedure to set up your Macintosh for TCP/IP:
1.Select Network from the System Preferences application, then select...

Macintosh
Phaser™ 4500 Laser Printer
3-34
Cre a ti ng a  Re nde zvous Pri nte r wi th Ma c OS X,  Ve rsi on 10. 2 or Hi ghe r
1.Open the Print Center utility (located in Utilities in the Applications Directory).
2.Click Add.
A list appears displaying your printer’s name, followed by a series of numbers. For 
example, Your Printer’s Name xx:xx:xx. Each numbered segment represents the last 
section of your printer’s hardware address. Your PPD is automatically selected.
3.Click Add to complete the...

Macintosh
Phaser™ 4500 Laser Printer
3-35
Ma c OS X,  Ve rsi ons 10. 1 a nd 10. 2
Perform these steps only for Mac OS X, versions 10.1 and 10.2:
1.Open the Network Utility, then click the Ping tab.
2.Enter your printer’s IP address.
3.Click Ping. If you do not get a response, confirm that your TCP/IP settings are correct for 
both your printer and computer.
4.For AppleTalk, follow the steps below. For TCP/IP proceed to Step 5.
a.From the printer’s front panel, verify that EtherTalk is enabled. If it is...

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
3-36
Novell NetWare
This topic includes:
■Configuration Software for NetWare Networks on page 3-36
■Quick Setup on page 3-36
■Advanced Setup on page 3-36
■NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup on page 3-37
■Novell NetWare Troubleshooting on page 3-37
Configuration Software for NetWare Networks
CentreWare DP configures the printer and the network when using NetWare 4.x, 5.x, and 6.x. 
CentreWare
 DP...

Novell NetWare
Phaser™ 4500 Laser Printer
3-37
Ne tWa re 4. x,  Ne tWa re 5.x, and NetWare 6. x Pri nt Se rve r Se tup
The Phaser printer defaults enable connection to Novell NetWare without adjustment. Review 
the “Configuration Page” and verify the following settings:
■NetWare is enabled
■Frame Type matches the frame type of the desired file server
■PDL is set to your desired PDL (PostScript or PCL) or to Auto. You may wish to set 
PDL to the desired type if only one PDL is used
■Desired Novell mode is...

Novell NetWare
Phaser™ 4500 Laser Printer
3-38
Re qui re me nts
Verify that you:
■Are operating a Windows-based system with CentreWare  DP software installed and at 
least one printer driver installed
■Are a NetWare Network Administrator, an administrative person with ADMIN/
SUPERVISOR, or ADMIN/SUPERVISOR EQUIVALENT within login rights to the 
NetWare Server(s) servicing the Phaser printer
■Have a basic knowledge of NetWare
Nove l l  Ne tWa re  Troubl e shooti ng Qui ck Che ck
1.Verify that the printer...

Novell NetWare
Phaser™ 4500 Laser Printer
3-39
Nove l l  Ne tWa re  Troubl e shooti ng Ste p-By-Ste p
These procedures eliminate cabling, communication, and connection problems associated with 
network connected printers. The steps are divided into two groups:
■Novell NetWare Hardware Step-by-Step
■Novell NetWare Software Step-by-Step
Note
Novell NetWare Software Step-by-Step assumes that you are connected to a Novell 
NetWare network with a Windows OS installed on the client workstation. When both of...