Xerox Phaser 3635mfpx Manual

11 Setups 
Xerox Phaser 3635 User Guide185
Counter Resets
Other replaceable units within the machine also track the number of images made 
as a measure of their life expectancy. These include:
•Fuser Counter
• Bias Transfer Roller Counter
• Feed Rollers Counter
• Document Feeder Friction Pad Counter
At the end of life, these units continue running without re-order notification 
messages. On replacement, select the Supplies tab and use the Counter Reset 
buttons to reset the counters to zero. 

11 Setups 
186Xerox Phaser 3635 User Guide
Accounting
Accounting allows the System Administrator to track the use of the machine and 
control access to the features. There are three accounting options:
•Network Accounting
•Xerox Standard Accounting
• Foreign Device Interface
Tools > Accounting > Accounting Enablement
Network Accounting
Network Accounting provides the System Administrator with the ability to track 
the use of the device per job per account. Users must enter their User ID and 
Account ID...

11 Setups 
Xerox Phaser 3635 User Guide187
Xerox Standard Accounting (XSA)
XSA tracks the numbers of Copy, Print, Networking Scanning, E-mail, Server Fax 
and Embedded Fax jobs (when these features are installed on the machine), for 
each user. Usage limits can also be applied to users to restrict the total numbers of 
copy, print, fax and scan jobs that a user can perform. System Administrators can 
print a report which contains all XSA data.
XSA is set up via CentreWare Internet Services, the...

11 Setups 
188Xerox Phaser 3635 User Guide
Print Job Control enables charging for print jobs. Print jobs sent when it is enabled 
will be held in the job queue and can be manually released when credits are 
available at the foreign device. 
The services available at the machine can be set using Inhibit Services. Choosing 
Copy Only will require credits at the foreign device for copying but allow access to 
other services. Inhibiting All Services will require credits to access any service that 
requires...

11 Setups 
Xerox Phaser 3635 User Guide189
Security Settings
Tools > Security Settings
Authentication
Job Operation Rights
Enable Job Operation Rights for All Users or System Administrator Only with this 
feature. This sets permissions to allow general users or Systems Administrators to 
delete jobs from the device print queue.
Tools > Security Settings > Authentication > Job Operation Rights
Image Overwrite Security
Immediate Image Overwrite
Immediate Image Overwrite is a security measure for customers...

11 Setups 
190Xerox Phaser 3635 User Guide
The On Demand Image Overwrite feature provides an on-demand facility for a 
System Administrator to erase all residual image data from the memory of the 
machine. The standard overwrite process takes approximately 30 minutes. A full 
overwrite process takes approximately 160 minutes.
Press Start to begin the overwrite.
All existing jobs will be deleted regardless of their status and all job submissions will 
be prohibited for the duration of the overwrite.
Tools...

11 Setups 
Xerox Phaser 3635 User Guide191
Machine Tests
Should you need to report any faults to the machine, the Xerox Welcome Center 
support may talk you through the following machine tests to verify the 
performance of the machine and user interface (UI) screen.
Image Quality Test Patterns
Use the scroll buttons to select one of the 19 available test patterns.
Select the Fe a t u re button to test either 1 sided or 2 sided printing from the 
available trays. 
Select the Start Test button to begin the...

11 Setups 
192Xerox Phaser 3635 User Guide
Audio Tone Test
The Audio Tones Test verifies that the Audio Tone on the UI is functioning 
properly.
1.Select Start Test to begin the test. The Audio Tone will activate if it is 
functioning properly.
2.Select End Test to end the test. The Test Pass/Fail screen displays.
3.Select the Passed button if the audio tones have sounded correctly. Select the 
Fa i l e d button if any of the audio tones are not functioning properly.
Display Pixel Test
The Display Pixel...

11 Setups 
Xerox Phaser 3635 User Guide193
Application Checksum Verification
The User Interface Application Checksum Verification checks that the UI software 
is up-to-date and running correctly.
Select Start Test to begin the test. A message will be displayed indicating that the 
test in progress. A second message will then be displayed indicating whether or not 
the test was completed successfully. 

11 Setups 
194Xerox Phaser 3635 User Guide
Customer Support and Supplies Numbers
Customer support and supplies numbers can be set to give users access to numbers 
and details vital to maintain the machine uptime.
Tools > Device Settings > General > Xerox Customer Support
This utility allows you to set the following numbers:
Customer Support Telephone Number
Supplies Telephone Number
Customer Asset Tag Number
Xerox Asset Tag Number.
Select the [-] hyphen button if needed as part of the number.