Xerox Phaser 3635mfpx Manual

13 Specifications 
Xerox Phaser 3635 User Guide205
Bypass Tray
NOTE: The paper stack height must not exceed 0.4" (10 mm)
Document Feeder
Paper Sizes
Length min 8.3 - max 14" (210 - 356 mm)
Width min 5.8 - max 8.5" (148 - 216 mm)
8.5 x 11"
8.5 x 14"
8.5 x 13"
ISO B5 176 x 250mm
ISO B5 182 x 257mm
Oficio
A4
A5
7.25 x 10.5"
Fe a t u reSpecification
Fe a t u reSpecification
Capacity
50 sheets 20 lb (80 g/m²) bond paper per tray
5 sheets transparencies
5 envelopes
Paper Weights16...

13 Specifications 
206Xerox Phaser 3635 User Guide
Output Modules
Output TrayDocument Feeder speed 
(A4)
1-1: 33 ipm
1-2: 23 ipm
2:2 collated: 12 ipm
Fe a t u reSpecification
Fe a t u reSpecification
Capacity
250 sheets of 20 lb (80 g/m²) bond paper 

13 Specifications 
Xerox Phaser 3635 User Guide207
Electrical Specifications
Fe a t u reSpecification
Frequency
50/60 Hz
Electrical Voltage110 - 127 VAC & 220 - 240 VAC
Average Power 
Consumption
Power Save mode: 35 Watts
Stand By mode: 100 Watts
Printing Simplex: 750 Watts
Printing Duplex: 750 Watts 

13 Specifications 
208Xerox Phaser 3635 User Guide
Feature Specifications
Fa x  Fe a t u r e
Print Feature
Fe a t u reSpecification
Fax Transmission Speed33.6 Kbps
Te l e p h o n e  L i n e  Ty p eStandard public analogue switched telephone line or 
equivalent
Communication StandardSuper G3, IYU G3
Maximum Resolution 
Capability406 x 392 dpi
Standard Fax MemoryStored on HDD = 80G
Effective Scanning Width8.2" (208 mm)
Maximum Print Width8.5" (216 mm)
Connection ApprovalsEU/EEA: certified to TBR21...

13 Specifications 
Xerox Phaser 3635 User Guide209
Scan Feature
Fe a t u reSpecification
Max scan width8.5" (216 mm)
Effective scan width8.2" (208 mm)
Maximum Resolution600 x 600 dpi
TWAIN / ISIS CompatibleNetwork Twain / WIA
Image CompressionMH, MMR, LZW, JPEG, Flate
Scan modeMono Text, Mono Photo and True Color
Gray scale256 levels 

13 Specifications 
210Xerox Phaser 3635 User Guide 

Xerox Phaser 3635 User Guide211
14Tro u b l e s h o o t i n g
A variety of situations can affect the quality of your output. For optimal performance, 
ensure these guidelines are followed:
• Do not position the machine in direct sunlight or near a heat source such as a radiator.
• Avoid sudden changes in the environment surrounding the machine. When a change 
occurs, allow the machine at least two hours to adjust to its new environment, depending 
on the extent of the change.
• Follow routine maintenance...

14 Troubleshooting 
212Xerox Phaser 3635 User Guide
Fault Clearance 
When a fault occurs, the display screen provides recovery instructions. 
Follow on-screen instructions to clear the fault
NOTE: Any printed sheets removed will automatically be reprinted once the paper 
jam is cleared.
Paper Jams
The display screen will indicate the location of the jam. Jam Clearance areas vary 
depending on your machine model and configuration.
Front cover area
Rear Cover (Duplex) area
Front
Rear 

14 Troubleshooting 
Xerox Phaser 3635 User Guide213
Front Cover Area Jams
1.Press on both the front cover latches on the sides of the machine to open the 
front cover.
2.Remove the print cartridge and remove any jammed paper. 
3.Replace the print cartridge and close the front cover door.
4.Open the paper trays and remove any jammed paper. 
5.Close the paper tray.
Rear Cover Area (Duplex Area) Jams
1.Open the machine rear covers and release the green rear cover support. 
Remove any jammed paper in the...

14 Troubleshooting 
214Xerox Phaser 3635 User Guide
3.Carefully close the fuser door. Ensure there is an audible click as the fuser door 
latch slides back into position.
4.Close the rear cover door.
Document Jams
1.Remove all the documents from the 
document feeder and document 
glass. 
2.Lift the document handler cover and 
remover any jammed paper.
3.Close the document handler cover.
4.Re-order the documents as at the 
start of the job and reload. The 
documents will be recycled 
automatically to...