Home > Xerox > Scanner > Xerox Documate 3115 Scanner Docking Station User Guide

Xerox Documate 3115 Scanner Docking Station User Guide

Here you can view all the pages of manual Xerox Documate 3115 Scanner Docking Station User Guide. The Xerox manuals for Scanner are available online for free. You can easily download all the documents as PDF.

Page 181

Xerox® DocuMate® 3115
User’s Guide181
Color Dropout
Color dropout tells the scanner and software to remove a specific color from the image. You can choose 
either 
Red, Green, or Blue, or define a custom color, to be dropped out of an image. 
To input a custom color using its RGB value, select 
Custom in this list and then input the values for R, G, 
and B in their appropriate boxes, where R, G, and B are numbers from 0 to 255. 
To l e r a n c e—use the slider to adjust the precision of the color...

Page 182

Xerox® DocuMate® 3115
User’s Guide 182
Advanced Panel Options
The options in this panel may also appear in the Main panel, but with additional settings for you to 
fine-tune the feature you've selected. Select the 
Advanced source configuration mode to show this 
panel.
Despeckle
This option removes speckles from the background. Speckles are small spots on an image that the 
scanner interpreted as a valid part of the document. For example, an irregularity in the paper, a small 
wrinkle, or holes...

Page 183

Xerox® DocuMate® 3115
User’s Guide183
Moiré Reduction
Moiré patterns are wavy or rippled lines that may appear in the scanned images of newspapers and 
magazines, and sometimes scanned images of photos, line drawings, and color scans of textured 
paper. Select the 
Moiré reduction option to have the driver attempt to find and remove moiré patterns 
from the image. Please note that when Moiré reduction is enabled the scanner may scan slower as the 
image is checked for moiré patterns. This option is only...

Page 184

Xerox® DocuMate® 3115
User’s Guide 184
Driver Configuration
Use the Driver configuration section to configure the add-on modules, select interface options, and view 
the scanner hardware properties. When the 
Advanced configuration mode is selected, a scanner panel 
option will be available for you to change any hardware settings that may be available for your 
scanner.
Disabled Options in this Section
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either...

Page 185

Xerox® DocuMate® 3115
User’s Guide185
Scanner Configuration
The scanner configuration tab shows the hardware information for your scanner.
Power adjustments:
•Power off—input the number of minutes you want the scanner to wait before it turns itself off. 
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
•
Reset device—click this button to revert the scanner hardware back to the scanner’s firmware 
defaults. As this...

Page 186

Xerox® DocuMate® 3115
User’s Guide 186
Hardware Properties and Interface Behavior
You can use the scanner’s properties page to keep track of scanner maintenance, change some of the 
hardware options, configure the scanner interface behavior, and adjust application options that may 
be available for your scanner.
To open the scanner hardware properties page:
•Windows 7 and 8—from the Windows Control Panel, open Hardware and Sound and then Devices 
and Printers
. 
Right-click on the scanner and then select...

Page 187

Xerox® DocuMate® 3115
User’s Guide187
•Serial number—the scanner’s unique identification number.
•
LLD version—the scanner’s base driver version. This is not the OneTouch software revision, TWAIN 
or WIA driver versions.
•
Driver version—this is the version of the scanner’s TWAIN driver.
Power Settings
•Power off—input the number of minutes you want the scanner to wait before it turns itself off. 
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset...

Page 188

Xerox® DocuMate® 3115
User’s Guide 188
General
•Lock settings—this option prevents the user from making changes to the options in the scanner 
interface. When the interface opens, only the scanning Presets will be available for a user to select 
and use for scanning. 
•
Default preset—select the preset you want to have be the default displayed options in the scanner 
interface each time it opens.
TWAIN Driver
•Auto transfer—scanning and transfer starts when the scanner detects paper.
•
Auto close on...

Page 189

Xerox® DocuMate® 3115
User’s Guide189
Application Settings
OneTouch Settings
•Turn on AutoLaunch™ for front-feed scanning—select this option to have the scanner automatically 
start scanning when an item is inserted in the front of the scanner.
•
Function—select the One Touch function number that you want to use for automatic front-feed 
scanning. Select 
Current to always use the current function number shown on the scanner display. 

Page 190

Xerox® DocuMate® 3115
User’s Guide 190 
Start reading Xerox Documate 3115 Scanner Docking Station User Guide

Related Manuals for Xerox Documate 3115 Scanner Docking Station User Guide

All Xerox manuals