Xerox Documate 3115 Scanner Docking Station User Guide

Xerox® DocuMate® 3115
User’s Guide141
Hardware Properties
1. Right-click on the OneTouch icon and choose Show Hardware from the pop-up menu.
2. The Hardware Properties dialog box opens and shows information about your Xerox scanner.
3. Click the 
Properties button.  

Xerox® DocuMate® 3115
User’s Guide 142
Device Settings
Please refer to Device Settings on page 186
Driver Settings
Please refer to Driver Settings on page 187 

Xerox® DocuMate® 3115
User’s Guide143
7Scanning from TWAIN 
and WIA
This chapter includes:
•Accessing the Scanner Interface on page 144
•Scanning on page 145
•Using the Preview Window on page 147
•Document Source Configuration on page 155
•Summary on page 159
•Presets on page 160
•Document Settings on page 165
•Image Enhancements on page 172
•Driver Configuration on page 184
•Hardware Properties and Interface Behavior on page 186 

Xerox® DocuMate® 3115
User’s Guide 144
Accessing the Scanner Interface
Every scanning application will access the scanner using a different method. Below is a brief list of 
common applications and how to initiate a scan from within that application, including some of the 
applications which may have been provided with your scanner. Please refer to the application’s user 
guide for instructions on using the application and accessing the scanner.
•
Visioneer OneTouch: Open the Visioneer OneTouch...

Xerox® DocuMate® 3115
User’s Guide145
Scanning
Some features described herein may not be available for the current scanner. Please disregard any 
information about features that you do not see in the interface for your scanner.
NOTE: Visioneer Acuity must be installed for the image processing options, described in this document, 
to be available in the interface for your scanner. Only features that are appropriate for your scanner will 
be enabled after Visioneer Acuity is installed. Visioneer Acuity is...

Xerox® DocuMate® 3115
User’s Guide 146
You can also click on the Preview button to open the preview dialogue for you to scan a preview image 
and set custom scan regions.
NOTE: You can lock or unlock the scanner’s interface from the driver configuration options for your 
scanner. The instructions for changing this setting are in the Driver Settings section of this guide. If you 
are unable to change this setting the option may have been set by your system administrator. Please 
contact your system...

Xerox® DocuMate® 3115
User’s Guide147
Using the Preview Window
Clicking the Preview button will display the preview window for the scanner interface. Use the preview 
option if you want to scan and display a sample image that reflects the current settings in the main 
interface. After the preview is displayed, you can then adjust the settings in the main interface until 
you are happy with how the sample image looks. The preview window is also where you can define 
custom scan regions. Please refer to...

Xerox® DocuMate® 3115
User’s Guide 148
4. Click Show main UI to bring the main scanner interface in front of the preview window for you to 
adjust the scan settings. 
There are some settings in the main interface, such as brightness and contrast, which will 
immediately update the preview image after you adjust the setting. Other settings, such as 
changing from color scanning to black and white scanning, will not automatically update the 
sample image.
If you select any of the document image adjustment...

Xerox® DocuMate® 3115
User’s Guide149
When you scan, any settings you adjusted are automatically saved to the Last used settings preset.  
These settings are not retained in a preset until you click 
Save in the main interface to save the settings 
to the current preset, or save them to a new preset using the 
Save as dialogue.  If you select a different 
preset from the 
Presets list before scanning, the changes you made will be discarded.
Scan Regions
You can use the preview window to create custom...

Xerox® DocuMate® 3115
User’s Guide 150
5. Move or resize region 1 until the sample image area you want is within the scan region. 
Resize the region by clicking on one edge of the region outline and dragging the mouse. Move the 
region by clicking in the region then dragging the mouse. Please refer to Move, Resize, or Delete 
Regions for detailed instructions.
6. Create additional scan regions as needed by clicking anywhere in the sample image, hold your 
mouse button down, and then drag your mouse to...