Xerox 8254E User Manual

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide4-57
Menu Setups on the Control Panel
Menu Set Up Procedure
Follow the procedure below to configure each setup menu.
1. Confirm that "Ready to Print" is displayed in the control panel.
2. Press the [Menu] key. "Menu 1: Setup>" displays in the control panel.
3. Press the [+] key or [–] key to select a setup item and press the [Enter] key.
• The settings will be confirmed. When setup items have a submenu, the...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 4-58
4. The setting in the blinking part of the control panel’s LCD monitor can be changed.
Press the [+] key or [–] key to change the setting.
5. To save the changed setting, press the [Enter] key.
• The setting is saved and the next setup item displays.
Note:
•If you press the [Cancel] key, [+] key, or [–] key without pressing the [Enter] key after 
changing a setting, the change will not be saved.
Downloaded From...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide4-59
6. Press the [Cancel] key to exit from the setup.
• The previous setup menu displays.
• When the main menu is displayed, "Ready to Print" displays in the control panel.
Panel Set Up Menu Overview
This section explains the Panel set up menu of the printer. The Panel set up menu contains the 
following items.
Note:
•For details of each setup item, refer to Menu Overview.
Setup ItemDescription
Setup menuAllows...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 4-60
Operating from the Control Panel
This section explains various functions that can be performed from the control panel.
Note:
•For names and functions of each key, refer to Printer Control Panel.
Feeding Media
You can feed roll media to the position that you want. Follow the procedure below to feed media.
1. Confirm that "Ready to Print" is displayed in the control panel.
2. Check that the media loading lever is...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide4-61
8264E only - How to fix the media firmly
1. Load the roll media to the printer.
Setting Roll Media
2. Lower the media loading lever.
3. Adjust the Media feed compensation value again.
Setting the Media feed compensation
Setting the Media feed compensation 
This control is active during printing operation.
1. Display the Media feed compensation menu in the control panel.
a. Press the [Menu] key. "Menu 1: Setup>"...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 4-62b. Press the [>] key. "Set1: MediaType" displays in the control panel.
c. Press the [Enter] key. "Media: Type 1" displays in the control panel.
d. Press the [+] key or [–] key to select the media type you are using.
Downloaded From ManualsPrinter.com Manuals 

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide4-63 e. Press the [Enter] key. "**>1: Print Mode" displays in the control panel.
Note:
•The selected media (Type 1 to 30) is displayed in "**." Media Type Menu
f. Press the [+] key or [–] key to select "**2: PF Adjust."
g. Press the [>] key. "PF1: Initial Print" displays in the control panel.
• Proceed to Media feed compensation menu.
PF Adjust menu
Downloaded From ManualsPrinter.com Manuals 

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 4-64
2. Print the initial adjustment print.
Note:
•Media feed compensation and micro print adjustments reset to defaults each time 
"Initial Print" is run.
a. Press the [Enter] key. "Feed Length: 250 mm" displays in the control panel.
Notes:
•The length of media that is fed (i.e., the feed length) for initial adjustment printing is 
normally set at 250 mm.
•If you increase the feeding length, the accuracy of the...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide4-65 b. Press the [Enter] key. "Printing" displays in the control panel.
• Initial adjustment printing starts.
• When the initial adjustment printing is complete, "Ready to Print" displays.
a. After the initial adjustment printing, cut the media.
Cutting Media
3. Measure the distance between the two plus marks (+) in the initial adjustment print, using a ruler.
No.Name
1Feed length
2Media feeding direction...

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 4-66
4. Set up Initial Adjust Change.
a. Press the [+] key or [–] key to select "PF2: Initial Change."
b. Press the [Enter] key. "Init.: 250.0/250 mm" displays in the control panel.
c. Press the [+] key or [–] key and enter the measured value from Step 3.
Downloaded From ManualsPrinter.com Manuals