Vodavi Starplus Triad S Description Manual

Purpose
This manual provides the information necessary to program, install, operate and maintain the STARPLUS
Triad-S”” systems.
Regulatory Information (U.S.A.)
The Federal Communications Commission (FCC) has established rules that allow the direct connection of
the 
STARPLUS Triad-S systems to the telephone network. Certain actions must be undertaken or
understood before the connection of customer provided equipment is completed.
Telephone Company Notif ication
Before connecting the STARPLUS Triad-S...

l-2IntroductionRegulatory Information (U.S.A.)
~l~l~l~l~~l~ltRI1Ei(lLi;lllsll~llr?ll~l~l~l~l~lIsll~l~l~llsrlll+lilsll~l~l~lLnlIs;ll~l~L
Changes in Service
The local telephone company may make changes in its communications facilities or procedures. If these
changes affect the use of the 
STARPLUS Triad-S system or compatibility with the network, the telephone
company must give written notice to the user to allow uninterrupted service.
Maintenance Limitations
Maintenance on the STARPLUS Triad-S system must...

Toll Fraud and DISA Disclaimer
“While this device is designed to be reasonably secure against intrusions from fraudulent callers, it is by no
means invulnerable to fraud. Therefore, no express or implied warranty is made against such fraud
including interconnection to the long distance network.”
“While this device is designed to be reasonably secure against invasion of privacy, it is by no means
invulnerable to such invasions. Therefore, no express or implied warranty is made against unlawful or...

Issue I- December 1998
:. .._ I.:.
. .
hlmll5llmlmlrlmll5ll
STARPLUS Triad-S Installation Manual 

-.
n
As with any sophisticated communications device, installation of the STARPLUS Triad-S system requires the
care and forethought of a competent technician. To assure easy servicing and reliable operation, several
factors must be considered when planning the system installation. The installation proceeds in these major
steps:
0 Site Preparation
9KSLJ and Power Supply (PS) Installation
o PCB Installation4 System Wiring
4
Keyset and Terminal Installation
4 Basic Installation Check-Out4
System Programming...

+The system should be located within 25 feet of the telephone company’s termination point. Also,
the location should be within the prescribed station loop lengths for all 
keysets and terminals. If
existing cabling is used, its location and conduits should be considered. Station wiring should be in
the building. Station ports are not designed for installation outside of the building.
eProtection from flooding, flammable materials, excessive dust and vibration.4
The site should be away from radio...

Installation
KSU Installation
2-3
KSU Installation
The STARPLUS Triad-S system consists of a Basic KSU (BKSU) cabinet,
., .I -f
c“:-?>’ Mounting the Basic KSU
The Basic KSU consists of a plastic cover, a metal base frame designed for wall mounting. Before installing
BKSU on the wall, two wall mounting plates that are assembled in the bottom side of the BKSU, must be
extended for mounting. The KSU must NOT be mounted on a masonry or dry-wall surface; a wooden
backboard is required.
A mounting template is...

issue I- December 1998
Figure 2-l: STARPLUS Triad-S Basic KSU
klll5llmlinlml~ll5ll~~
STARPLUS Triad-S hstallation Manual 

Figure 2-2: STARPLWS Triad-S Basic KSU Mounting Holes and Installation
Mounting the Expansion KSU (EKSU)
The Expansion KSU consists of a plastic cover, a metal base frame designed for wall mount installation. The
EKSIJ contains a power transformer and expansion interface board (EIB). The EKSU MUST be mounted
above the BKSU. Before installing the BKSU on the wall, the wall mounting plate that is assembled in the
bottom side of the EKSU, must be extended for wall mounting and the fastener provided with the...

2-6Installation
Mounting the Expansion KSU (EKSU)4
The EKSU is mounted with two #lo or larger, 1 ‘/z inch or longer screws. Drill pilot holes in the two
locations marked, insert the screws and tighten leaving about 
‘/z inch exposed. Mount the
Expansion KSU on the screws and tighten the screws securely,
Interconnection is achieved via an 
amphenol type connector and power cable. The amphenol connector is
included and connects the EKSU to the BKSU on the right side through connectors labeled 
EXP. Refer...